• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1090-1097
• /
• 2008

This study conducted the decision method of lateral flow in abutment structures founded on the soft soils and the reliability analysis on the foundation pile for abutment. On the basis of the results, this study proposed the reliability design model. Reliability analysis was conducted by applying second moment method, point estimation method, and expected total cost minimization to lateral movement index, lateral movement decision index, modified lateral movement decision index, and circular failure safety factor for the decision criteria of lateral flow. The reliability index by analysis method had a similar tendency each other. Point estimation method was found as a practical method in the aspect of convenience because it could conduct the analysis only by mean and standard deviation as well as the partial derivative on random variables was not necessary. Optimum reliability index and optimum safety according to increasing in failure factors and load ratio were analyzed and loads and resistance factors of the design criteria of optimum reliability were estimated. It presented rational design model which can consider construction level and stability and economical efficiency overall.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.219-223
• /
• 2006

In this paper, the criteria of the lateral displacement in soft soil due to embankment were evaluated. The lateral displacement was measured at a pier structure in a new harbor construction site, and the measurement was compared with the criteria. The results by the measurement such as the critical pressure causing lateral movement in terms of undrained strength, the lateral movement index by Japan Highway Co., the lateral displacement index by Japan Construction Ministry, the modified index by Korean Highway Co. were estimated to be lower than the respective index values.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.381-388
• /
• 2002

A series of centrifuge model tests were performed to investigate the behavior of piled bridge abutment subjected to lateral soil movements induced by the construction of approach embankment. In these tests, both the depth of soft clay and the rate of embankment construction are chosen as key parameters to examine the effects on lateral soil movements. The depth of soft clay layer varies from 5.2 m to 11.6 m, and the rate of embankment construction has two types of staged construction(1m/30days, 1m/15days) and instant construction. It is shown that, the distribution of lateral flow induced by stage embankment construction has a trapezoidal distribution. And practical guidelines to check the possibility of some lateral movement of piled abutment were investigated. The validity of the proposed guidelines by centrifuge test was compared with the observed performance by lateral movement index, F(Japan Highway Public Corporation) and modified I index(Korea Highway Corporation). Based on the results obtained, the critical values of F and modified I, as a practical guidelines, are proposed to 0.03 and 2.0, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.269-278
• /
• 2001

국내 30개의 교대측방이동 사례현장에 대하여 교대기초말뚝의 사면안정효과와 교대의 실측측방변위를 고려한 사면안정해석을 실시하였다. 해석결과 사면안전율은 말뚝의 효과를 무시한 경우 1.5이상, 말뚤의 효과를 고려한 경우 1.8이상 되어야 안전함을 알 수 있다. 그리고, 교대의 실측측방변위와 사면안전율과의 상관관계로부터 교대의 허용측방변위 설계기준은 5cm보다 1.5cm로 함이 더 합리적임을 알 수 있다. 사면안정해석결과와 교대의 실측측방변위를 토대로 기존에 제안된 교대측방이동 판정기준의 국내 적용여부를 검토한다. 이를 위하여 교대의 사면안정해석결과 및 실측측방변위와 교대측방이동 관련지수와의 상관관계를 조사한다. 그 결과 실측된 교대의 측방변위와 이를 고려한 사면안전율은 교대의 측방유동지수, 측방이동판정지수 및 지반의 안정계수와 무관한 경우도 많이 존재하는 것으로 나타났다. 이는 결국 이들 경험적인 지수만으로 교대측방이동을 판정하는 것은 불충분함을 의미한다. 따라서, 교대측방이동을 판정할 경우에는 반드시 교대의 측방변위를 고려한 사면안정해석이 실시되어야 한다.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.897-907
• /
• 2020

The flow characteristics of reactor fuel assembly always intrigue the designers and the experimentalists among the myriad phenomena that occur simultaneously in a nuclear core. In this work, the visual experimental method has been developed on the basis of refraction index matching (RIM) and particle image velocimetry (PIV) techniques to investigate the detailed flow characteristics in China fast reactor fuel subassembly. A 7-rod bundle of simulated fuel subassembly was fabricated for fine examination of flow characteristics in different subchannels. The experiments were performed at condition of Re=6500 (axial bulk velocity 1.6 m/s) and the fluid medium was maintained at 30℃ and 1.0 bar during operation. As for results, axial and lateral flow features were observed. It is shown that the spiral wire has an inhibitory effect on axial flow and significant intensity of lateral flow mixing effect is induced by the wire. The root mean square (RMS) of lateral velocity fluctuation was acquired after data processing, which indicates the strong turbulence characteristics in different flow subchannels.

• Journal of Biomedical Engineering Research
• /
• v.38 no.2
• /
• pp.82-88
• /
• 2017

Enlargement of the lateral ventricles have been identified as a surrogate marker of neurological disorders. Quantitative measure of the lateral ventricle from MRI would enable earlier and more accurate clinical diagnosis in monitoring disease progression. Even though it requires an automated or semi-automated segmentation method for objective quantification, it is difficult to define lateral ventricles due to insufficient contrast and brightness of structural imaging. In this study, we proposed a fully automated lateral ventricle segmentation method based on a graph cuts algorithm combined with atlas-based segmentation and connected component labeling. Initially, initial seeds for graph cuts were defined by atlas-based segmentation (ATS). They were adjusted by partial volume images in order to provide accurate a priori information on graph cuts. A graph cuts algorithm is to finds a global minimum of energy with minimum cut/maximum flow algorithm function on graph. In addition, connected component labeling used to remove false ventricle regions. The proposed method was validated with the well-known tools using the dice similarity index, recall and precision values. The proposed method was significantly higher dice similarity index ($0.860{\pm}0.036$, p < 0.001) and recall ($0.833{\pm}0.037$, p < 0.001) compared with other tools. Therefore, the proposed method yielded a robust and reliable segmentation result.

• Geomechanics and Engineering
• /
• v.36 no.3
• /
• pp.295-301
• /
• 2024

Understanding the post-liquefaction shear behavior is crucial for predicting and assessing the damage, such as lateral flow, caused by liquefaction. Most studies have focused on the behavior until liquefaction occurs. In this study, we performed undrained multi-stage tests on clean sand, sand-silt mixtures, and silty soils to investigate post-liquefaction shear strain based on soil compressibility. The results confirmed that it is necessary to consider the soil compressibility and the shape of soil particles to understand the post-liquefaction shear strain characteristics. Based on this, an index reflecting soil compressibility and particle shape was derived, and the results showed a high correlation with post-liquefaction small resistance characteristic regardless of soil type and fine particle content.

• Journal of Korea Water Resources Association
• /
• v.53 no.8
• /
• pp.597-604
• /
• 2020

Muskingum, a hydrologic channel flood routing, is a method of predicting outflow by using the relationship between inflow, outflow, and storage. As many studies for Muskingum model were suggested, parameters were gradually increased and the calculation process was complicated by many parameters. To solve this problem, an optimization algorithm was applied to the parameter estimation of Muskingum model. This study applied the Advanced Nonlinear Muskingum Model considering continuous flow (ANLMM-L) to Wilson flood data and Sutculer flood data and compared results of the Linear Nonsingum Model incorporating Lateral flow (LMM-L), and Kinematic Wave Model (KWM). The Sum of Squares (SSQ) was used as an index for comparing simulated and observed results. Exponential Bandwidth Harmony Search with Centralized Global Search (EBHS-CGS) was applied to the parameter estimation of ANLMM-L. In Wilson flood data, ANLMM-L showed more accurate results than LMM-L. In the Sutculer flood data, ANLMM-L showed better results than KWM, but SSQ was larger than in the case of Wilson flood data because the flow rate of Sutculer flood data is large. EBHS-CGS could be appplied to be appplicable to various water resources engineering problems as well as Muskingum flood routing in this study.

• Journal of Food Hygiene and Safety
• /
• v.28 no.3
• /
• pp.213-216
• /
• 2013

Antibiotic Detection Kit (Combination I), a lateral flow immunoassay (LFIA) developed for the detection of antibiotic residues in milk, was utilized for the analysis of antibiotic residues in the muscle tissue of olive flounder. After 60-min treatment by dipping in water dosed with ampicillin (200-g/ton water), the residue depletion of ampicillin was investigated in 25 cultured olive flounder (Paralichthys olivaceus). Muscles of fish were sampled on the 1st, 2nd, 3rd, 4th and 5th day after drug treatment. The concentration of ampicillin in the muscle was determined by LFIA. The absorbance ratio of the sample to the control blank (Bs/Bo) was employed as an index to determine the muscle residues in olive flounder. To investigate the recovery rate, standard solutions were added to muscle samples to give final concentrations in the muscle of 4 and 8 ng/ml. The recovery rates of all spiked samples were > 96% of the spiked value. Ampicillin was detected in the muscle of fish treated with the drug until the 2nd day of the withdrawal period. The present study showed that the LFIA can be easily adopted to predict ampicillin residues in tissue of farmed fishes.

• Parasites, Hosts and Diseases
• /
• v.54 no.3
• /
• pp.375-380
• /
• 2016

Angiostrongyliasis is difficult to be diagnosed for the reason that no ideal method can be used. Serologic tests require specific equipment and are not always available in poverty-stricken zone and are time-consuming. A lateral flow immunoassay (LFIA) may be useful for angiostrongyliasis control. We established a LFIA for the diagnosis of angiostrongyliasis based on 2 monoclonal antibodies (mAbs) against antigens of Angiostrongylus cantonensis adults. The sensitivity and specificity were 91.1% and 100% in LFIA, while those of commercial ELISA kit was 97.8% and 86.3%, respectively. Youden index was 0.91 in LFIA and 0.84 in commercial ELISA kit. LFIA showed detection limit of 1 ng/ml of A. cantonensis ES antigens. This LFIA was simple, rapid, highly sensitive and specific, which opened an alternative approach for the diagnosis of human angiostrongyliasis.