• 한국지진공학회논문집
• /
• 제28권6호
• /
• pp.355-364
• /
• 2024

Recently, high-rise residential buildings in Korea have adopted slender shear walls with irregular section shapes, such as T-shape, H-shape, and C-shape. In the seismic design of the slender shear walls, the transverse reinforcement for lateral confinement should be provided in the boundary elements to increase deformation capacity and subsequent ductility. However, in practice, the irregularity of the shear walls is not adequately considered, and the lateral confinement region is calculated for the rectangular wall segments. This study investigated the proper design method for lateral confinement regions using finite element analysis. The lateral confinement region was considered in analysis for two cases: 1) as a typical rectangular wall segment and 2) as an irregular wall. When the irregularity of the walls was considered, the compression zone depth was increased because the vertical reinforcement in the flange was addressed. The effect of lateral confinement design methods on the structural performance of the walls was directly compared under various design parameters, including the length of the flange, concrete compressive strength, vertical rebar layout, axial load ratio, and loading direction. According to the results of the parametric analysis, the peak strength and deformation capacity could be significantly increased when the lateral confinement region was calculated based on irregularly shaped walls, regardless of the design parameters. In addition, the effective compression zone was located within the lateral confinement region. Thus, it is recommended that the lateral confinement region of T-shaped walls is calculated by addressing the irregularity of the walls.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.77-80
• /
• 2006

Longitudinal reinforcements of the plastic hinge region were behaved tensile deformation and compressional deformation by direction of lateral loading. However Confinement steels were behaved only tensile deformation by lateral loading. Transverse steels were laid the state of tension in the lateral loading of time, and they were laid state that stress is zero when it was removed lateral load. Nine specimens were tested under cyclic stresses(tension and zero). The purpose of this research is to investigate the strain behavior and capacity of energy for confinement steel. The selected test variables are $L/d_b(L/d_b=6)$, size of reinforcement and specified yielding strength(300, 400, 500 MPa).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.617-620
• /
• 2003

This paper presents the confinement effect of transverse reinforcement and cross-tie in hollow rectangular sectional columns. 20 analytical models with different amounts of transverse reinforcement and cross-tie in a plastic hinge region were analyzed by 3D nonlinear FEM. The analytical results show that the higher ductility can be achieved by the resonable combination of transverse re-bar and cross-tie providing sufficient lateral confinement.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.843-852
• /
• 2005

Presently, test results and stress-strain models for poorly confined high-strength columns, more specifically for columns with a tie volumetric ratio smaller than $2.0\%$, are scarce. This paper presents test results loaded in axial direction for square reinforced concrete columns confined by various volumetric ratio lateral ties including low-volumetric ratio. Test variables include concrete compressive strength, tie yield strength, tie arrangement type, and tie volumetric ratio. Local strains measured using strain gages bonded to an acryl rod. For square RC columns confined by lateral ties, the confinement effect was efficiently improved by changing tie arrangement type from Type-A to Type-B. A method to compute the stress in lateral ties at the concrete peak strength and a new stress-strain model for the confined concrete are proposed. Over a wide range of confinement parameters, the model shows good agreement with stress-strain relationships established experimentally.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.65-70
• /
• 2001

The compression toe of structural wall is designed to resist the axial compression and shear force caused by wind or earthquake. The performance of shear wall used in tall building is highly influenced by combined shear and axial force. For this reason, it is possible to result in local brittle failure because of concentrated damage in the potential plastic hinge region under severe earthquake. Thus, it is necessary to establish the lateral confinement details at the plastic hinge of shear wall so that shear wall can behave a ductile manner, The objective of this study is to evaluate the seismic performance of L-shaped walls with different confinement details. For this purpose, three wall specimens were tested experimentally and also analyzed using Nonlinear FEM package.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.687-696
• /
• 2004

철근콘크리트 교각의 시공시 소성힌지구간에서 주철근 겹침이음은 내진성능면에서 바람직하지 않으나 불가피하게 시공되는 경우가 있었다. 특히, 1992년 도로교표준시방서의 내진설계 기준이 마련되기 이전에 설계 시공된 대부분의 철근콘크리트 교각은 소성힌지구간에 주철근을 겹침이음 하였으며, 이들은 휨에 대한 소성영역에서의 거동에 직접적인 영향을 미친다. 본 연구에서는 직경 1.2m, 형상비 4.0의 휨파괴가 예상되는 비내진 및 한정연성시험체를 8기 제작하여 준정적(Quasi-Static)실험을 통한 철근콘크리트(RC) 교각의 소성힌지구간내의 주철근 겹침이음과 횡방향구속력이 내진성능에 미치는 영향을 평가하였다. 실험체의 변수로서는 $0\%,\;50\%,\;100\%$의 주철근 겹침이음, 2종류의 횡구속철근비 및 띠철근 형상을 선택하였다. 연구결과 주철근 겹침이음 정도에 따라 철근콘크리트 교각의 내진성능은 급격히 저하되었으며, 겹침이음이 없는 한정연성설계된 시험체의 경우 높은 내진성능을 발휘하였다. 연구결과에 따라 중저진지역에서 겹침이음된 주철근 교각의 내진성능을 위한 적절한 횡방향철근량을 제안하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.81-84
• /
• 2008

The purposes of this study are to verify a reasonable model of material characteristic and to propose a rational model of reinforcement characteristic considering monotonic and cyclic loading about manufactured reinforcing steel in Korea. Longitudinal reinforcements of the plastic hinge region were behaved tensile deformation and compressional deformation by direction of lateral loading. However Confinement steels were behaved only tensile deformation by lateral loading. Transverse steels were laid the state of tension in the lateral loading of time, and they were laid state that stress is zero when it was removed lateral load. The tests for cyclic tension loading were performed for test variable as yield strength and reinforcement bar sizes. It was estimated that the total strain energy per unit volume was 74 $MJ/m^3$. The modified ultimate concrete compression strain model was proposed based on experimental study of cyclic tension test for manufactured reinforcing steel in Korea.

• 한국정보통신학회논문지
• /
• 제5권4호
• /
• pp.777-790
• /
• 2001

광통신용 광섬유의 최저손실 파장영역인 1.55w에서 고출력으로 안정하게 동작하는 SLD를 설계하기 위하여 이론적인 해석을 수행하였다. 활성영역과 SCH층의 재료는 Int-xGaxAsyPl-y를 이용하였다. 활성영역의 측방향과 횡방향 모드해석으로부터 단일모드 고출력 동작을 위한 광전력분포와 광가둠계수를 구하였으며, 이들 계산으로부터 최대 광가둠계수를 얻기 위한 SCH층의 조성과 두께를 계산하였다. 낮은 반사도를 얻기 위하여 후면 에 윈도우 영역을 두었고 활성영역과 윈도우 영역의 계면이 측방향으로 각도를 가지게 하였으며 가우시안빔 근사와 모드해석으로부터 반사도를 계산하였다. $1.3\mum$ InGaAsP를 SCH층으로 하였을 때 최대의 광가둠계수를 얻기 위한 SCH층의 두께는$0.08\mum$정도이었다. 10-4정도의 반사도를 얻기 위해서는 활성층의 두께를 $0.2\mum$, SCH 층의 두께를 $0.08\mum$ 로 하였을 때 무반사코팅을 하지 않을 경우 윈도우 영역의 길이는 $100\mum$ 정도이고, 반사도 1% 정도의 무반사 코팅을 할 경우 $10\mum$ 정도가 된다. 측면 경사각이 $10~15^{\circ}$이면 반사도는 10-3정도가 된다. 이들 결과로부터 AR코팅을 하지 않고도 윈도우 영역의 길이와 측면 경사각을 적당히 조절한다면 안정적으로 동작하는 SLD의 제작이 가능하다는 것을 알 수 있다.

• Computers and Concrete
• /
• 제17권3호
• /
• pp.387-406
• /
• 2016

Confined transverse reinforcement was arranged in a plastic hinge region to resist the lateral load that increased the lateral confinement effect in the bridge substructure. Columns increased the seismic performance through securing stiffness and ductility. The calculation method of transverse reinforcements at plastic hinges is reported in the AASHTO-LRFD specification. This specification was only proposed for solid reinforced concrete (RC) columns. Therefore, if this specification is applied for another column as composite column besides the solid RC column, the column cannot be properly evaluated. The application of this specification is particularly limited for composite hollow RC columns. The composite hollow RC column consists of transverse, longitudinal reinforcements, cover concrete, core concrete, and an inner tube inserted in the hollow face. It increases the ductility, strength, and stiffness in composite hollow RC columns. This paper proposes a modified equation for economics and rational design through investigation of displacement ductility when applying the existing specifications at the composite hollow RC column. Moreover, a parametric study was performed to evaluate the detailed behavior. Using these results, a calculation method of economic transverse reinforcements is proposed.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.135-149
• /
• 2017

The prediction of the actual ultimate capacity of confined concrete columns requires partial confinement utilization under eccentric loading. This is attributed to the reduction in compression zone compared to columns under pure axial compression. Modern codes and standards are introducing the need to perform extreme event analysis under static loads. There has been a number of studies that focused on the analysis and testing of concentric columns. On the other hand, the augmentation of compressive strength due to partial confinement has not been treated before. The higher eccentricity causes smaller confined concrete region in compression yielding smaller increase in strength of concrete. Accordingly, the ultimate eccentric confined strength is gradually reduced from the fully confined value $f_{cc}$ (at zero eccentricity) to the unconfined value $f^{\prime}_c$ (at infinite eccentricity) as a function of the ratio of compression area to total area of each eccentricity. This approach is used to implement an adaptive Mander model for analyzing eccentrically loaded columns. Generalization of the 3D moment of area approach is implemented based on proportional loading, fiber model and the secant stiffness approach, in an incremental-iterative numerical procedure to achieve the equilibrium path of $P-{\varepsilon}$ and $M-{\varphi}$ response up to failure. This numerical analysis is adapted to assess the confining effect in rectangular columns confined with conventional lateral steel. This analysis is validated against experimental data found in the literature showing good correlation to the partial confinement model while rendering the full confinement treatment unsafe.