• Analytical Science and Technology
• /
• v.32 no.3
• /
• pp.105-112
• /
• 2019

Fingerprints may be contaminated with ethanol solutions. In order to solve the case, the law enforcement agency may need to visualize the fingerprint from these samples, but the development method has not been studied. The paper with latent fingerprint was contaminated with ethanol solution and then the blurring of ridge detail was observed. As a result, when the copy paper was contaminated with ethanol solutions of less than 75 % (v/v), the amino acid components of latent fingerprint residue blurred but lipid components of latent fingerprint residue didn't blurred. On the other hand, when the paper was contaminated with ethanol solution of more than 80 % (v/v), the amino acid components of latent fingerprint didn't blurred but the lipid components of latent fingerprint blurred. Therefore, it is found that the paper contaminated with ethanol solutions of less than 75 % (v/v) should be treated by oil red O (ORO) enhancing lipid components, and the paper contaminated with ethanol solutions of 80 % (v/v) or more should be treated by 1,2-indandione/zinc (1,2-IND/Zn) enhancing amino acid components. The blurring of ridge detail was not observed when the fingerprints were deposited with fingers contaminated with ethanol solution. This fingerprints were treated with 1,2-IND/Zn or ORO to compare the latent fingerprint development ability, and using 1,2-IND/Zn was able to visualize the latent fingerprint more clearly than using ORO.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.26-32
• /
• 2015

The consistency and homogeneity of repetitive printing of artificial fingerprint were evaluated using a visual minutiae comparison method and an Automated Fingerprint Identification System (AFIS). The standard latent fingerprint pattern was prepared by the printing of a master digital fingerprint pattern with an inkjet printer cartridge case filled with artificial sweat. The master digital fingerprint pattern was prepared with a scanning of an inked fingerprint pattern of a living subject. The intensities of the master digital fingerprint pattern were adjusted by changing the 'output level' values of the Adobe Photoshop CS 5 software. Number of standard latent fingerprint patterns were printed and then developed with conventional latent fingerprint developing methods; ninhydrin treatment method and 1,2-indandion(1,2-IND)/$ZnCl_2$ treatment method. The ridge details of the latent fingerprint patterns developed with the reagents were visually compared with the inked fingerprint pattern and could confirm that the minutiae of both patterns are visually identical. The ridge detail of the inked fingerprint and reagent developed standard latent fingerprint patterns were compared with an AFIS. The average number of minutiae searched by the AFIS was $52.4{\pm}2.4$ (range = 48~56) for 50 ninhydrin developed latent fingerprint patterns, and $50.2{\pm}1.9$ (range = 47~53) for 50 1,2-IND/$ZnCl_2$ developed latent fingerprint patterns. These low standard deviation values over 50 repetitive printing demonstrated that the 50 standard latent patterns were printed with consistent and homogeneous manner.

• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.1
• /
• pp.99-103
• /
• 2024

Previous artificial latent fingerprint solution has shown unsatisfactory results. Therefore, in this study, we developed an artificial latent fingerprint solution close to the actual fingerprint composition by improving the lipid composition. We mixed lipid solution with amino acid solution at v/v ratios as follows: 2:3, 1:4, 1:5, 1:8, 1:10, 1:20. We then dropped the same amount of each proportion of artificial latent fingerprint solution on porous paper and non-porous slide glass. Subsequently, each sample was treated with Oil red O, Cyanoacrylate fuming and Basic yellow 40 staining. As the concentration of lipids decreased, the output also decreased. Both types of surfaces and all concentrations were visually confirmed very well. In addition, the reactivity to lipids was significantly higher compared to the previous artificial latent fingerprint solution. Furthermore, for the quantitative evaluation, it is necessary to conduct additional research on the printing of the artificial latent fingerprint solution.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.222-228
• /
• 2008

On living skin the chances of a successfully developing latent fingerprint are very limited. This is due to the fact that continual perspiration and rapid absorption diffuse into the lipophillic layer on skin. A study was conducted to investigate effectively developing method of latent fingerprints on human skin surfaces and pig skin likely corpse's skin. We used commercial fingerprint powder, black powders, black magnetic powder, fluorescence magnetic powder, Cyanoacrylate fuming (CA) and direct lifting methods (lifting paper, glasses and photo glossy paper). Developing of fresh fingerprints on living skin was achieved with S-powderblack, CA fuming and CA fuming following S-powder, fluorescence powder. The other powder tends to overwhelm the latent print and the background. But, latent fingerprint residue was disappeared with time after deposit on a living surface. In case of pig skin likely corpse's skin, latent fingerprint detection was achieved with CA fuming following S-powder and deposited print during 6 hr at $25^{\circ}C$, 40% relative moisture yielded excellent fingerprints with clear ridge details using 1 min CA fuming. And enhancement of fingerprint detection image using forensic light source was achieved.

• Analytical Science and Technology
• /
• v.36 no.2
• /
• pp.80-88
• /
• 2023

Fingerprints play a crucial role in the identification of potential suspects in criminal cases. However, determining the actual time, i.e., the time at which the fingermark was deposited, is challenging. Herein, we investigated the persistence and aging of fingerprints over time by observing the time evolution of latent fingerprints on a polystyrene box stored in a dark room. Fingerprint samples that were stored for up to two years could be detected with maximum accuracy using a black iron-oxide-based emulsion (black emulsion). To estimate the time of fingerprint deposition, fingerprint aging was studied by analyzing the lipid components of the fingerprints after their development. Cholesterol and squalene were selected as indicators of fingerprint aging, and their ratio was estimated to assess aging. In the case of fingerprint samples stored in a dark room for up to one month after deposition, the cholesterol/squalene ratio was approximately 0.01; it increased gradually to ≥ 0.1 over six months. A substantial reduction in the levels of cholesterol and squalene from the initial levels was also noted. Cholesterol and squalene were not detected after one year of storage. Thus, the extent of aging could be determined by analyzing the aging indicators for up to six months. Two cases that could cause error in the estimation of the fingerprint deposition time, namely, heating of the fingerprint sample before development and storage of the developed fingerprints in a dark room, were also investigated.

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.209-216
• /
• 2016

Latent fingerprint left on the adhesive sides of tapes can be easily found at a crime scene. Small Particle Reagents(SPR) based on iron oxide($Fe_3O_4$) is a technique for the detection of a latent fingerprint adhesive surface. In this study, found out that the causes affecting the quality of the fingerprints developed when used SPR based on iron oxide. To a suspension of 0.5g of iron oxide in 100ml of distilled water, 0.5ml or more surfactant were added can be developed latent fingerprints of good quality. In addition, using surfactants HLB(hydrophile-lipophile balance) value of 11~18 showed good contrast to the background and latent fingerprint.

• Analytical Science and Technology
• /
• v.20 no.2
• /
• pp.155-163
• /
• 2007

Porosity paper evidence is encountered in case of forgery, kidnapping, fraud and terrorist activity. The present study was designed to evaluate the effect of three chemical reagents (Ninhydrin, 1,8-diazafluoren-9-one (DFO), Iodine fuming) to the quality of developed latent fingerprints on porosity printing papers and newspaper. In case of printing papers, print quality was better with Iodine fuming method than Ninhydrin and DFO treatment to developing latent fingerprints. Developing latent fingerprint on newspapers was achieved with Iodine fuming processing. The processing of Iodine fuming followed by DFO and by using blue light (orange red filter) exhibited better results with Iodine fuming. Enhancement of latent fingerprint detection image using Digital Imaging System was achieved.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.89-96
• /
• 2010

In general, three types of fingerprints could be found at the crime scene: visible, plastic, and latent fingerprints. Examples of visible fingerprint include those made by blood, paint or ink. Plastic fingerprint are made from an impression of the finger on soft material as soap, wax, etc. Latent fingerprint are those of the invisible one to the human eye. Oil-contaminated fingerprints remained in the evidence, that are contaminated with the soybean oil, engine oil, lubricating oil or grease. Oil-contaminated fingerprints are special types of fingerprint evidence but the research for developing method regarding oil-contaminated fingerprints is a few. In this study, ultraviolet light source was employed for untreated oil-contaminated prints and the freeze-dry method with liquid nitrogen for freeze oil residue on the surfaces with sequence of developing oil-contaminated fingerprints with black and magnetic powders, cyanoacrylate (CA) fuming, Basic Yellow 40. The types of oil chosen for the experiment were soybean oil, LSA oil, engine oil and material surfaces selected for the experiment were glass, plastic aluminum plates. The aims of this study were to determine the appropriate developing methods for oil-contaminated fingerprints.

• Analytical Science and Technology
• /
• v.25 no.3
• /
• pp.164-170
• /
• 2012

Cyanoacrylate fuming mehod is effective for latent fingerprints developing on non-porous surfaces. In this study, we investigated optimal conditions for latent fingerprint development using cyanoacrylate fuming method in vacuum chamber. The effects of temperature, relative humidity, fuming method and processing time were checked throughly. The amount of evaporated cyanoacrylate was increased at higher temperature, but cyanoacrylate polymerization on the fingerprint ridge was best at $30^{\circ}C$. With a relative humidity of 40% to 50% conditions, good quality of fingerprints were developed. If a relative humidity is lower than 30% or higher than 60%, polymerization rate of cyanoacrylate monomers on the fingerprint ridge was decreased. It was identified that application of $OMEGA-PRINT^{TM}$ dispersal pad or cotton ball with sodium hydroxide fuming method in vacuum chamber was more effective than natural fuming method. We found that cyanoacrylate processing time in vacuum chamber did not have more significant than relative humidity.

• Analytical Science and Technology
• /
• v.22 no.2
• /
• pp.166-171
• /
• 2009

Powder method is simple and very effective method for developing latent finger and palm print in crime scene. This technique has been actively studied to enhance effectiveness. In general, the evaluation for developing powder is mainly performed by the subjective opinion of researcher from comparison of the results obtained with existing and new one to develope finger and palm deposition. The purpose of this work is to present objective method of powder-treated latent fingerprint for evaluating method by developing efficiency. We indicated three evaluating methods of objective developing efficiency, which are measuring the number of minutiae in same sections on print, scattering level of developing reagent and contrast between developing reagent and background materials.