• Korean Journal of Construction Engineering and Management
• /
• v.6 no.6 s.28
• /
• pp.152-159
• /
• 2005

Since Lean Construction has been introduced as a new management approach to improve productivity in the construction industry, much research is in progress to develop lean concepts and principles for better implementation and to get results of the successful adaptation of lean ideas from manufacturing for application in the construction industry. Currently, Lean Construction Institute developed Last Planner System to achieve better workflow and effective planning management. Domestic construction companies are also getting interested in the Lean Construction. However, there are no detailed guidelines how to implement lean system. Thus, this study will provide a guideline for deployment of last planner system, a prototype lean implementation control checklist, and all project participants roles based on the case studies in USA. This study should provide a framework to apply lean construction to domestic construction sites.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.1
• /
• pp.9-15
• /
• 2005

Objectives : To analyze medical expenses by cancer site and survival time among cancer patients in their last year of life. Method : The study subjects were 45,394 people that had died of cancers in 2002, were registered by the Korea Central Cancer Registry and received National Health Insurance benefit in the last year (360 days) of life. Personal identification data, general characteristics, dates of death and cancer incidence, and site of cancer were collected from the National Statistical Office and the Korea Central Cancer Registry, and merged with the data of the individual medical expenses of the Health Insurance Review Agency. Results : Average monthly cost curves were U-shaped with high costs near the time of diagnosis and death, and lower costs in between. Medical expenses in the last year of life were around 30.3, 16.7, 13.0, and 12.1 million won among leukemia, lymphoma, ovarian cancer, and breast cancer patients, respectively. Digestive organ cancers including stomach, esophagus, liver, pancreas, and colorectal cancers had relatively low medical expenses. Medical expenses in the last year of life were inverse U-shaped with high expenses near one year of survival. Average monthly cost in the 12 months before death among the patients who had survived $10{\sim}15$ years were more than two-fold greater than the cost before diagnosis among those who had survived for less than one year. Conclusions : Leukemia was the most expensive cancer. It is possible that once diagnosed as cancer, medical expenses do not return to the level before diagnosis. Further research will be needed to understand the magnitude and change of the medical expenses among cancer patients with long term follow up data.

• Journal of Korea Foundry Society
• /
• v.29 no.3
• /
• pp.120-127
• /
• 2009

The characterestics of high Si-high Mo ductile cast iron, high Si-high Mo C.V. cast iron and Ni-resist cast iron were compared and evaluated. The nodule count of the last one was lower and the nodularity was higher than those for the first one, respectively. The first two had ferritic matrices with small amounts of molybdenum carbides. The first one had the highest tensile strength and the last one the lowest elongation. This had the highest high temperature strength and that of the second one was greatly increased from the room temperature strength. The volumes of the first two were decreased during cooling and that of the last one changed little. The thermal expansion coefficient of the last one was the highest and the first one the lowest. During high temperature oxidation, even though the volume of the first one was increased, the weight was decreased and the volume and weight of the second one were increased. The change of the increased weight of the last one was more than that of thickness.

• Korean Journal of Veterinary Service
• /
• v.16 no.1
• /
• pp.1-10
• /
• 1993

Samples of bulk herd milk, foremilk, last milk (stripping) and individual cow sample were collected and their somatic cell number were counted with Fossomatic counter (FCC), Coulter counter(CC), direct microscopic somatic cell count(DMSCC) and Califormia mastitis test (CMT), The results were compared and summarized as follows : 1. Mean somatic cell counts of 120 bulk herd milk samples obtained by DMSCC, FCC and CC were 433,203, 481,213 and 676,245 respectively. 2. Mean somatic cell counts of 116 foremilk samples obtained by DMSCC, FCC and CC were 515,035, 611,845 and 725,051 respectively 3. Mean somatic cell counts of 87 last milk samples obtained by DMSCC, FCC and CC were 718,506, 839,874 and 1,041,160 respectively. 4. Mean somatic cell counts of 57 individual cow samples obtained by DMSCC, FCC and CC were 449,258, 491,018 and 521,315 respectively. 5. Mean somatic cell counts of all samples increased with the increasing CMT score, and the cell counts were higher by CC than by FCC. 6. The correlation coefficients between the somatic cell counts by CMT and CC were 0.926 in bulk herd milk, 0.707 in foremilk 0.688 in last milk and 0.675 in individual cow sample, respectively 7. The correlation coefficients between the somatic cell counts by CMT and FCC were 0. 945 in bulk herd milk, 0.705 in foremilk 0.694 in last milk and 0.727 in individual cow sample, respectively. 8. The correlation coefficients between the somatic cell counts by CC and FCC were 0.978 in bulk herd milk, 0.997 in foremilk 0.983 in last milk and 0.985 in individual cow sample, respectively.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.60-67
• /
• 2021

Countries around the world, including the U.S. are actively researching to commercialize the logistics services using drones. In Korea, telecommunications companies as well as logistics companies are researching and developing the logistics services using drones. However, there's an environmental difference for last-mile delivery between the U.S. and Korea. In Korea, more than 77% of the population lives in apartments and the population density is the 4th highest in the world. Accordingly, in terms of the logistics services using drones, it is necessary to research it with the Korean suitable environment. In this paper, a precision positioning method of drone last-mile delivery in urban areas using short-range wireless communication and barometer is proposed. The experiment results show that the proposed method can detect a window within 2.5 meters. It is expected that the proposed method will help improve the logistics services using drones in urban areas.

• Earthquakes and Structures
• /
• v.24 no.1
• /
• pp.37-51
• /
• 2023

Türkiye has made significant changes and updates in both seismic risk maps and design codes over time, as have other countries with high seismic risk. In this study, the last two seismic design codes and risk maps were compared for the Aegean Region (Western Türkiye) where the earthquake risk has once again emerged with the 2020 Izmir Earthquake (Mw=6.9). In this study, information about the seismicity of the Aegean Region was given. The seismic parameters for all provinces in the region were compared with the last two earthquake risk maps. The spectral acceleration coefficients of all provinces have increased and differentiated with the current seismic hazard map as a result of the design spectra used on a regional basis have been replaced by the geographical location-specific design spectra. In addition, section damage limits were obtained for all provinces within the scope of the last two seismic design codes. Structural analyses for a sample reinforced-concrete building were made separately for each province using pushover analysis. The deformations in the cross-sections were compared with the limit states corresponding to the damage levels specified in the last two seismic design codes for the region. Target displacement requests for all provinces have decreased with the current code. The differentiation of geographical location-specific design spectra both in the last two seismic design code and between provinces has caused changes in section damages and building performance levels. The main aim of this study is to obtain and compare both seismic and structural analysis results for all provinces in the Aegean Region (Western Türkiye).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.2
• /
• pp.160-167
• /
• 2023

This study focuses on the development of a Last-Mile delivery service using unmanned vehicles to deliver goods directly to the end consumer utilizing drones to perform autonomous delivery missions and an image-based precision landing algorithm for handoff to a robot in an intermediate facility. As the logistics market continues to grow rapidly, parcel volumes increase exponentially each year. However, due to low delivery fees, the workload of delivery personnel is increasing, resulting in a decrease in the quality of delivery services. To address this issue, the research team conducted a study on a Last-Mile delivery service using unmanned vehicles and conducted research on the necessary technologies for drone-based goods transportation in this paper. The flight scenario begins with the drone carrying the goods from a pickup location to the rooftop of a building where the final delivery destination is located. There is a handoff facility on the rooftop of the building, and a marker on the roof must be accurately landed upon. The mission is complete once the goods are delivered and the drone returns to its original location. The research team developed a mission planning algorithm to perform the above scenario automatically and constructed an algorithm to recognize the marker through a camera sensor and achieve a precision landing. The performance of the developed system has been verified through multiple trial operations within ETRI.

• Korean Journal of Construction Engineering and Management
• /
• v.3 no.4 s.12
• /
• pp.139-144
• /
• 2002

Management of today's dynamic projects requires a shift of focus from product to process. The purpose of traditional project controls is to conform performance to plan. The purpose of lean project controls is to make the best possible choices at each point in time during the course of the project, as well as contributing knowledge to the parent organizations so they can learn from project experience. The Lean Construction Institute(LCI) proposed the Last Planner System(LPS) capable of accomplishing that purpose, principally through controlling the quality of planning and of management processes themselves, as distinct from concentrating exclusively on project performance. The case project was a pilot project for the implementation of the Last Planner. Consequently, the coordination of the work on this project was extremely successful. The project had its share of challenges. The coordination did not prevent design problems, or supplier errors, but helped the team deal with the problems effectively while maintaining the work flow. The last planner helped the contractors know: a) who will be doing what and where, b) what each one needs from the others, and c) what are the project priorities. The system itself created a more collaborative environment, because it 'demands' that the subcontractors address these issues.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.281-284
• /
• 2004

This paper presents studies on the development of an internal measurement system for the footwear using laser sensor. The measurement system gains to the height of the profile at internal footwear. It accomplishes the 3-axises control which uses ball screws, L-M guides and stepping motors. It is used a laser sensor at the measurement of the distance, and Labview is used for the control and the measurement. We can get the profile through reverse engineering for the LAST. The data of profile is fixed a heigh of the LAST. Then, we try to verify as compare the profile with one which is collected by Internal measurement system..

• Journal of Korean Neurosurgical Society
• /
• v.63 no.3
• /
• pp.272-278
• /
• 2020

Compared to any other decade, the last two decades have been the most dynamic period in terms of advances in the knowledge on spinal dysraphism. Among the several factors of rapid advancement, such as embryology during secondary neurulation and intraoperative neurophysiological monitoring, there is no doubt that Professor Dachling Pang stood high amidst the period. I review here the last two decades from my personal point of view on what has been achieved in the field of spinal dysraphism, focusing on occult tethered cord syndrome, lumbosacral lipomatous malformation, terminal myelocystocele, retained medullary cord, limited dorsal myeloschisis and junctional neural tube defect. There are still many issues to revise, add and extend. Profound knowledge of basic science is critical, as well as refined clinical analysis. I expect that young scholars who follow the footsteps of precedent giants will shed bright light on this topic in the future.