• 한국소음진동공학회논문집
• /
• 제25권1호
• /
• pp.13-23
• /
• 2015

이 논문은 원판형 압전 변환기의 면내 방사 진동 특성을 실험적으로 다룬다. 면내 방사 진동은 두께 방향으로 분극이 된 압전 원판에서 푸아송비로 인해 야기되는 것으로서, 레이저 면내 진동 측정기로써 측정되었고, 고유진동수는 임피던스 분석기로써 측정되었다. 실험 결과는 단순화된 이론적 해석과 유한요소 해석으로부터 얻어진 이론적 예측과 비교되었다. 원판형 압전 변환기의 기본 모드는 방사 모드이고, 중심으로부터 가장자리까지의 반경 방향 변위 분포는 단조 증가가 아니라 원주면에서 약간 떨어진 위치에서 최대 값을 나타낸다. 지름 대비 두께 비율이 작은 원판에서 이론적으로 계산된 기본 진동수는 유한요소 결과와 잘 일치하고, 두께/지름 비율 0.4까지 오차 7 % 이내로 정확하다.

• 한국소음진동공학회논문집
• /
• 제25권12호
• /
• pp.807-814
• /
• 2015

A control rod drive mechanism(CRDM) is a reactor regulating system, which inserts, withdraws or maintains a control rod containing a neutron absorbing material within a reactor core to control the reactivity of the core. The top-mounted CRDM for Jordan Research and Training Reactor(JRTR) with 5 MW power has been designed and fabricated based on the HANARO's experience through KAERI and DAEWOO consortium project. This paper describes the performance qualification test results to demonstrate the operability of a prototype and four production CRDMs during the reactor lifetime. The driving performance, the drop performance and the endurance tests for CRDM are carried out at a test rig simulating the actual reactor conditions. A vibration of internal components due to the coolant flow is also measured using a laser vibrometer. As a result, the CRDMs are driven having a good driving performance without a malfunction between command and output signals for the stepping motor. Also, the pure drop time and the impact acceleration are within 0.72 s and 4.2 g to meet the design requirements, and the vibrational displacement of control rod is measured as maximum $5.2{\mu}m$.

• 비파괴검사학회지
• /
• 제34권3호
• /
• pp.211-219
• /
• 2014

Closed cracks are difficult to detect using conventional ultrasonic testing because most incident ultrasound passes completely through these cracks. Nonlinear ultrasound inspection using sub-harmonic frequencies a promising method for detecting closed cracks. To implement this method, a sub-harmonic phased array (PA) is proposed to visualize the length of closed cracks in solids. A sub-harmonic PA generally consists of a single transmitter and an array receiver, which detects sub-harmonic waves generated from closed cracks. The PA images are obtained using the total focusing method (TFM), which (with a transmitter and receiving array) employs a full matrix in the observation region to achieve fine image resolution. In particular, the receiving signals are measured using a laser Doppler vibrometer (LDV) to collect PA images for both fundamental and sub-harmonic frequencies. Oblique incidence, which is used to boost sub-harmonic generation, inevitably produces various surface waves that contaminate the signals measured in the receiving transducer. Surface wave interference often degrades PA images severely, and it becomes difficult to read the closed crack's position from the images. Various methods to prevent or eliminate this interference are possible. In particular, enhancing images with signal processing could be a highly cost-effective method. Because periodic patterns distributed in a PA image are the most frequent interference induced by surface waves, spatial frequency filtering is applicable for removing these waves. Experiments clearly demonstrate that the spatial frequency filter improves PA images.

• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5854-5860
• /
• 2014

본 연구에서는 대표적인 토목구조물인 교량에서 영상 기반 변위 계측장치(VDMS)를 이용하여 변위를 측정하고, 고가의 변위측정장비인 LDV와의 비교를 통하여 그 현장 적용 성능을 평가하였다. 본 연구에서 사용한 VDMS는 카메라와 마커, 프레임 그래버, 노트북으로 구성되었으며, 마커를 구조물에 부착하여 그 영상을 촬영하고 평면 호모그래피 기법을 이용하여 마커가 부착된 구조물의 변위를 측정하는 장치이다. 개발된 VDMS의 성능 검증을 위하여 우선 소형 구조물을 이용한 간단한 실내 실험을 수행하였다. 다음으로 실제 철도교량에서 KTX를 다양한 조건으로 주행하고, 그에 의하여 발생한 변위를 VDMS과 LDV를 이용하여 계측한 뒤, 얻어진 두 변위를 비교하여 VDMS의 현장 적용 성능을 평가하였다.

• 센서학회지
• /
• 제29권1호
• /
• pp.33-39
• /
• 2020

Typically, photoacoustic images are obtained in water or gelatin because the impedance of these mediums is similar to that of the human body. However, these acoustic mediums can have an additional mass effect that changes the resonance frequency of the transducer. The acoustic radiation impedance in air is negligible because it is very small compared to that of the transducer. However, the high acoustic impedance of mediums such as the human body and water is quite large compared to that of air, making it difficult to ignore. Specifically, in a case where the equivalent mass is very small, such as with a micro-machined ultrasound transducer, the additional mass effects of the acoustic medium should be considered for an accurate resonance frequency design. In this study, a piezoelectric micro-machined ultrasonic transducer (pMUT) was designed to have a resonance frequency of 10 MHz in the acoustic medium of water, which has similar impedance as the human body. At that time, the resonance frequency of the pMUT in air was calculated at 15.2 MHz. When measuring the center displacement of the manufactured pMUT using a laser vibrometer, the resonance frequencies were measured as 14.3-15.1 MHz, which is consistent with the finite element method (FEM) simulation results. Finally, photoacoustic images of human hair samples were successfully obtained using the fabricated pMUT.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1367-1372
• /
• 2008

A plate type supporting structure of a tube bundle in axial flow generates a certain band of a high frequency periodic excitation of a vortex shedding and/or a flow separation due to sharp edge of the plate thickness and a severe pressure drop due to a cross-sectional area of the supports. With a design consideration of the low vibration and a small flow resistance, the analysis method is uniquely confined to an experimental approach because a complex geometry of a cylindrical tube bundle and/or physical phenomena related to the fluid-structure interaction of tube bundle in a flow impede a theoretical or a numerical approach. A 5x5 cylindrical tube bundle with 5 supports which were discretely located along the bundle's axis was tested in the FIVPET hydraulic test loop for a design evaluation and an analysis perspectives. A high frequency flow-induced vibration of the supporting structures of the cylindrical tube bundle was measured at a outer surface of a supporting structure through a transparent flow housing by the laser dopper vibrometer. Pressure drop in-between three measurement distances was measured by the differential pressure transmitter. High frequency vibration and pressure drop fairly depends on the geometric design of supporting structure. So, these two parameters would be used as a qualitative design variables for design evaluation and analysis.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1563-1568
• /
• 2012

인쇄전자는 RFID 나 유연 디스플레이 등의 전자회로나 소자를 인쇄방식으로 제작하는 공정이다. 특히 롤투롤과 같은 웹 이송방식 프린팅은 얇은 필름형태의 웹(Web)에 그라비아 인쇄나 고속 잉크젯과 같은 방법으로 이송중인 웹 상에 회로를 형성하는 공법이다. 이 공정은 생산단가가 저렴하고 고속생산이 가능하다는 이점이 있다. 다층구조를 가지는 회로나 디바이스를 생산할 때, 층과 층을 얼마나 정확하게 중첩시켜 인쇄하는가 하는 것은 인쇄된 전자회로의 집적도와 성능을 결정짓는 중요한 요소이다. 인쇄전자공법을 상용화하기 위해서 높은 중첩정밀도 구현이 선행되어야 한다. 본 연구에서는 롤투롤 인쇄방식에서 중첩정밀도의 향상을 위한 위치측정 시스템을 제안하고 신뢰성을 확인하였다. 또한 웹이 변형되었을 때의 측정 강인성도 실험적으로 확인하였다.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.40-49
• /
• 2006

A novel disturbance measurement method, model based disturbance observer (MBDO) for optical disk drives (ODDs), is proposed and the disturbance analysis using the proposed method is performed under various conditions. In ODDs, the quantitative and qualitative analysis for the generated disturbance during normal operation is very important to successful servo loop design. However, the disturbance measurement is difficult, and high precision measurement is necessary. Furthermore, the conventional disturbance measurement method using a LDV (laser Doppler vibrometer) has many difficulties in eccentricity direction due to the vertical movement of an optical disk. To solve this problem, the MBDO is proposed. First, the relationship between the servo loop for ODDs and the generated disturbance are briefly reviewed. Second, the principle of the MBDO is introduced, and the disturbance measurement results, which are measured by the MBDO and a LDV, are compared. In these experiments, test DVD-ROM disks are used to generate quantitative/qualitative disturbance. Then, the disturbance analysis under various conditions is performed using waterfall technique. This technique clearly shows the disturbance trend from the inner part of an optical disk to the outer part of it. Finally, the various disturbances measurement results are summarized and some remarks for it are commented.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.29-37
• /
• 2011

The modal characteristics of a compressor wheel of an automotive turbocharger have been investigated using an experimental method based on an acoustic frequency response function, p/f(${\omega}$), where p is sound pressure radiated from a structure, and f is impact force. First, a well-defined annular disc with narrow radial slots was examined to check whether the vibro-acoustic test could precisely determine natural quencies and vibration modes of structures showing that the vibro-acoustic test proposed in this paper was comparable to the conventional modal test with an accelerometer and the numerical analysis. The conventional method has been found to be inappropriate for compressor wheel because of additional mass due to the accelerometer and additional damping from the accelerometer cable alter the dynamic responses of the wheel blades. odal characteristics of the wheel have been defined using vibro-acoustic test and verified with the results from another conventional method using a laser vibrometer. Natural quencies and mode shapes of a turbocharger wheel, which can't be precisely obtained with onventional method, could be defined accurately without the additional effects from sensor and cable. Proposed method can be applied to small structures where conventional sensors and cables could generate troubles.

• 대한기계학회논문집B
• /
• 제35권11호
• /
• pp.1147-1156
• /
• 2011

CLECDiS 는 면적변화형 정전용량 센서의 단점을 극복하고 나노미터 수준의 분해능으로 밀리미터 이상의 큰 변위를 측정하도록 개발된 접촉식 변위센서이다. 그러나 접촉구동 특성으로 인하여 표면평탄도와 마찰에 의해 작은 접촉상태의 변화에도 출력 신호는 크게 왜곡될 수 있어 실제 이를 활용하기 위해서는 전극간 접촉상태를 안정적으로 유지하는 것이 중요하다. 이에 본 연구에서는 전극간 접촉상태의 변화에 따른 신호의 왜곡 특성을 실제 출력 신호와 비교하여 분석하고, 접촉면 내 압력 분포와 센서의 운동 오차 측정을 통해 접촉상태의 변화를 파악하였다. 이를 통하여 센서의 운동 오차와 마찰력의 영향을 최소화하기 위한 접촉 유지 기구를 설계하고 제작하였으며 이를 이용한 구동실험을 통해 보다 안정적인 센서 출력 신호를 획득하였다.