• Korean Chemical Engineering Research
• /
• 제55권5호
• /
• pp.646-651
• /
• 2017

CNT 유동층 반응기(내경 0.15 m, 높이 2.6 m) 희박상 내 CNT 입자(평균입도 $291{\mu}m$, 벌크밀도 $72.9kg/m^3$)의 거동을 확인하기 위해 레이저 슬릿광 형상 측정법을 이용하여, CNT 응집체의 크기 및 형태를 측정하였다. 기포유동층 조건에서 CNT 반응기 내 축방향 고체체류량 분포는 하부 농후상과 상부 희박상을 갖는 S자 형태를 보였다. 기체 유속이 증가할수록 비산되는 CNT 응집체의 Heywood 직경과 Feret 직경이 증가하였고, 응집체 내 CNT 입자수가 증가하였다. 또한, 기체의 유속이 증가할수록 CNT 응집체의 종횡비는 증가하고, 원형도는 감소하였다. CNT 응집체의 원마도와 견고도는 기체의 유속이 증가할수록 감소하였다. 응집체의 형상 분석 정보에 기반한 희박상 내 응집체 형성 원인을 제안하였다.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.38-45
• /
• 2004

This paper studies the effects of intake port configuration on the swirl that is key parameter in the flow field of direct injection diesel engines. In-cylinder flow characteristics is known to have significant effects on fuel air mixing, combustion and emissions. To investigate the swirl flow generated by various intake ports, steady state flow tests were conducted to evaluate the swirl. Helical port geometry, SCV shape and bypass were selected as the design parameters to increase the swirl flow and parametric study was performed to choose the optimal port shape that would generate a high swirl ratio efficiently. The results revealed that a key factor in generating a high swirl ratio was to suitably control the direction of the intake air flow passing through the valve seat. For these purposes, we changed the distance of helical and tangential port as well as installed bypass near the valve seat and the effects of intake port geometry on in-cylinder flow field were visualized by a laser sheet visualization method. From the experimental results, we found that the swirl ratio and mass flow rate had a trade off relation. In addition, the result indicates that the bypass is a effective method to increase the swirl ratio without sacrificing mass flow rate.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.221-238
• /
• 2004

Wall interactions of direct injection spray were investigated using laser-sheet imaging, shadowgraphy, wetted footprint and phase Doppler interferometry techniques. A narrow-cone high-pressure swirl injector is used to inject iso-octane fuel onto a plate, which has three different impact angles inside a pressurized chamber. Heated air and plate conditions were compared with unheated cases. Injection interval was also varied in the heated case to compare dry- and wet- wall impingement behaviors. High-speed macroscopic Mie-scattering images showed that presence of wall and air temperature has only minor effect on the bulk spray structure and penetration speed for the narrow-cone injector tested. The overall bulk motions of the spray plume and its spatial position at a given time are basically unaffected until a few millimeters before impacting the wall. The surface properties of the impact surface, such as the temperature, the presence of a preexisting liquid film also have a small effect on the amount of wetting or the wetted footprint; however, they have strong influence on what occurs just after impact or after a film is formed. The shadowgraph in particular shows that the plate temperature has a significant effect on vapor phase propagation. Generally, 10-20% faster horizontal vapor phase propagation is observed along the wall at elevated temperature condition. For impingement onto a preexisting film, more splash and evaporation were also observed. Contrary to some preconceptions, there is no significant splashing and droplet rebounding from surfaces that are interposed in the path of the DI gasoline spray, especially for the oblique impact angle cases. There also appears to be a dense spray front consists of large sac spray droplets in the oblique impact angle cases. The bulk of the spray is not impacted on the surface, but rather is deflected by it The microscopic details as depicted by phase Doppler measurements show that the outcome of the droplet impaction events can be significantly influenced. Only droplets at the spray front have high enough Weber numbers for wall impact to wet, splash or rebound. Using the sign of vertical velocity, the time-resolved downward droplets and upward droplets are compared. The Weber number of upward moving droplets, which seldom exceeds unity, also decreases as the impact angle decreases, as the droplets tend to impact less and move along the wall in the deflected spray plume.

• 한국화재소방학회논문지
• /
• 제15권1호
• /
• pp.1-6
• /
• 2001

본 연구는 터널내 화재발생시 자연 배기에 의한 연기의 거동을 해석하기 위하여 축소모형 실험을 수행하였다. 터널내 연기의 유동은 부력에 의해 지배되므로 Froude scaling에 의해 실물 터널을 1/20로 축소한 모형터널에서 실험을 수행하였으며 배기구의 위치변화에 따른 영향을 평가하기 위하여 화원으로부터 각각 1m, 2m, 3m 떨어진 곳에 배기구를 대칭으로 위치시켜 세가지 경우에 대해 실험을 실시하였다. 지름이 4.36 cm인 화원의 경우, 배기구의 위치에 관계없이 배기구 통과 후 연층의 온도가 배기를 실시하지 않은 경우와 비교하여 약 7~$8^{\circ}$ 낮게 유지되었다. 지름이 5.23cm인 화원의 경우, 배기구가 화원에 가까울수록 배기구 통과 후 연기의 평균속도가 감소하였으며 최대 3.86초가 지연되었다. CASE 1에서는 배기구 통과 후 천장에서 약 $8^{\circ}c$, 수직온도가 약 $7^{\circ}c$ 감소하였으며, CASE 2에서는 천장과 수직온도가 약 $3^{\circ}c$ 감소하였으며, CASE 3에서는 각각 약 $2^{\circ}c$가 감소하였다. 레이저와 디지털 캠코더를 이용하여 배기구 주위의 연기 유동을 가시화하여 화재발생 약 1분 후부터 연층의 두께가 터널높이의 25%이하로 일정하게 유지되는 것을 확인할 수 있었다.