• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1282-1287
• /
• 2004

The bubble behavior and the radiation mechanism from a laser-induced collapsing bubble were investigated theoretically using the Keller-Miksis equation for the bubble wall motion and analytical solutions for the vapor inside bubble. The calculated time dependent bubble radius is in good agreement with observed ones. The half-width of the luminescence pulse at the collapse point, which was calculated under assumption that the light emission mechanism is black body radiation from the vapor bubble agreed well with observed value of several nanoseconds. The gas content inside the vapor bubble was too small to produce the light emission due to bremsstrahlung.

• 대한기계학회논문집B
• /
• 제41권7호
• /
• pp.463-468
• /
• 2017

경피를 통한 약물 전달 방식에 있어, 본 연구에서 제안하고 있는 바늘 없는 주사기 시스템은 레이저와 마이크로젯 인젝터로 구성 되어 있다. 이때 마이크로젯 인젝터의 핵심 메커니즘은 레이저 유도버블이다. 동력원으로 Nd:YAG와 Er:YAG, 두 종류의 레이저가 사용되었다. 버블의 특성을 결정짓는 레이저 변수인 펄스폭, 파장 등이 본 연구에서 고려되었다. Nd:YAG 레이저의 경우에 펄스폭이 버블의 생존 시간보다 짧기 때문에 캐비테이션에 가까운 버블을 형성하는 반면 Er:YAG 레이저의 경우에 펄스폭이 상대적으로 길고 물에서의 흡수가 잘 되기 때문에 보일링 버블이 만들게 된다. 버블 및 마이크로젯의 자세한 움직임은 초고속 카메라를 통해 촬영되었다. 이와 같은 과정을 통하여 마이크로젯의 특성이 버블에 의해 결정되는 것을 본 연구를 통해 관찰되었다. 약물 전달 성능은 기니어피그 조직에 형광물질을 침투한 결과로 부터 분석하였다.

• 대한기계학회논문집B
• /
• 제30권5호
• /
• pp.413-421
• /
• 2006

The bubble dynamics induced by direct laser heating is experimentally analyzed as a first step to assess the technical feasibility of laser-based ink-jet technology. To understand the interaction between laser light and ink, the absorption spectrum is measured for various ink colors and concentrations. The hydrodynamics of laser-generated bubbles is examined by the laser-flash photography. When an Ar ion laser pulse (wavelength 488 nm) with an output power up to 600 mW is incident on the ink solution through a transparent window, a hemispherical bubble with a diameter up to ${\sim}100{\mu}m$ can be formed with a lifetime in a few tens of microsecond depending on the laser power and the focal-spot size. Parametric study has been performed to reveal the effect of laser pulse width, output power, ink concentration, and color on the bubble dynamics. The results show that the bubble generated by a laser pulse is largely similar to that produced by a thin-film heater. Consequently, the present work demonstrates the feasibility of developing a laser-actuated droplet generation mechanism for applications in ink-jet print heads. Furthermore, the results of this work indicate that the droplet generation frequency is likely to be further increased by optimizing the process parameters.

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.67-73
• /
• 2008

Three-dimensional transient simulation of laser-GMA hybrid welding involving multiple physical phenomena is conducted neglecting the interaction effect of laser and arc heat sources. To reproduce the bubble and pore formations in welding process, a new bubble model is suggested and added to the established laser and arc welding models comprehending VOF, Gaussian laser and arc heat source, recoil pressure, arc pressure, electromagnetic force, surface tension, multiple reflection and Fresnel reflection models. Based on the models mentioned above, simulations of laser-GMA hybrid butt welding are carried out and besides the molten pool flow, top and back bead formations could be observed. In addition, the laser induced keyhole formation and bubble generation duo to keyhole collapse are investigated. The bubbles are ejected from the molten pool through its top and bottom regions. However, some of those are entrapped by solid-liquid interface and remained as pores. Those bubbles and pores are intensively generated when the absorption of laser power is largely reduced and consequently the full penetration changes to the partial penetration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.348-353
• /
• 2001

Experimental schemes that enable characterization of phase-change phenomena in the micro scale regime is essential for understanding the phase-change kinetics. Particularly, monitoring rapid vaporization on a submicron length scale is an important yet challenging task in a variety of laser-processing applications, including steam laser cleaning and liquid-assisted material ablation. This paper introduces a novel technique based on Michelson interferometry for probing the liquid-vaporization process on a solid surface heated by a KrF excimer laser pulse (${\lambda}=248nm,\;FWHM=24\;ns$) in water. The effective thickness of a microbubble layer has been measured with nanosecond time resolution. The maximum bubble size and growth rate are estimated to be of the order of $0.1{\mu}m\;and\;1\;m/s$, respectively. The results show that the acoustic enhancement in the laser induced vaporization process is caused by bubble expansion in the initial growth stage, not by bubble collapse. This work demonstrates that the interference method is effective for detecting bubble nucleation and microscale vaporization kinetics.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1140-1147
• /
• 2001

Experimental schemes that enable characterization of phase-change phenomena in the microscale regime are essential for understanding the phase-change kinetics. Particularly, monitoring rapid vaporization on a submicron length scale is an important yet challenging task in a variety of laser-processing application, including steam laser cleaning and liquid-assisted material ablation. This paper introduces a novel technique based on Michelson interferometry for probing the liquid-vaporization process on a solid surface heated by a KrF excimer laser pulse(λ=248nm, FWHM=24ns) in water. The effective thickness of a microbubble layer has been measured with nanosecond time resolution. The maximum bubble size and growth rate are estimated to be of the order of 0.1㎛ and 1m/s, respectively. The results show that the acoustic enhancement in the laser induced vaporization process is caused by bubble expansion in the initial growth stage, not by bubble collapse. This work demonstrates that the interference method is effective for detecting bubble nucleation and microscale vaporization kinetics.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2005년도 춘계학술발표대회 논문집
• /
• pp.32-39
• /
• 2005

• 한국레이저가공학회지
• /
• 제10권2호
• /
• pp.5-15
• /
• 2007

A new printing process for LCD color filter is proposed in this work by using the localized laser heating, which is called laser-induced spray printing (LISP) process. The LISP is a non-contact process, which injects the ink from the donor substrate to the glass substrate by the bubble pressure induced by laser heating. The temperature distribution of the donor substrate is calculated numerically to explain the ink ejection phenomena. The composition of the ink was includes the red pigment, n-butanol, xylene, BCA and epoxy. Experiments were conducted by using the fiber laser system, and the color filter patterns were deposited successfully under the proper laser heating conditions.

• 한국정밀공학회지
• /
• 제31권1호
• /
• pp.75-81
• /
• 2014

Laser beam machining has been known as efficient for glass micromachining. It is usually used the ultra-short pulsed laser which is time-consuming and uneconomic process. In order to use economic and powerful long pulsed laser, indirect processing called laser-induced backside wet etching (LIBWE) is good alternative method. In this paper, micromachining of glass using Nd:YAG laser with nanosecond pulsed beam has been attempted. In order to improve shape accuracy, combined processing with magnetic stirrer has been widely used. Magnetic stirrer acts to circulate the solution and remove the bubble but it is not suitable for deep hole machining. To get better effect, ultrasonic vibration was applied for improving shape accuracy.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.326-330
• /
• 2010

본 연구진은 레이저-물질 간의 상호작용을 응용하여 새로운 방식의 약물 전달 시스템을 개발하고 있다. 레이저 빔이 마이크로 단위 크기의 고무 챔버 속에 채워져 있는 액체 속에 집광되면 순간적인 고에너지 전달로 인해 기포가 생겨나고, 이로 인한 빠른 부피팽창으로 인해 마이크로 노즐 속의 약물 용액이 빠른 속도의 마이크로 젯의 형태로 분사되는 원리를 이용하는 것이다. 실험에서 노즐 출구의 지름은 125 ${\mu}m$, 측정된 마이크로 젯의 속도는 265 m/s였다. 이 장치의 주요한 특징은 시간에 따른 마이크로 젯의 제어가 가능하다는 것이다.