• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.49-52
• /
• 2007

Terrestrial Laser Scanning(TLS) was developed at the mid-to-late 1990s. This technique enables to perform reconnaissance surveying of regions or structures hard to access. Besides, TLS has been extended its application gradually such as preservation of historical remains, underground surveys, slopes, glaciers monitoring and so on. However, though the technique has a lot of advantages, an application for structural health and safety monitoring is a beginning stage and it need much research. Therefore in this study, as a groundwork, the estimation model on stress of structures using TLS and Finite Element Method(FEM) applied by the Digital Elevation Model(DEM) technique of geoinformatics is proposed. For the verification of this model, experiments were performed with a continuous steel beam subjected to point loads and outputs were compared with those of electrical strain sensors.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.84-91
• /
• 2004

A CCD camera with a laser stripe was applied to realize the automatic weld seam tracking in GMAW. It takes relatively long time to process image on-line control using the basic Hough transformation, but it has a tendency of robustness over the noises such as spatter and arc tight. For this reason, it was complemented with adaptive Hough transformation to have an on-line processing ability for scanning specific weld points. The adaptive Hough transformation was used to extract laser stripes and to obtain specific weld points. The 3-dimensional information obtained from the vision system made it possible to generate the weld torch path and to obtain the information such as width and depth of weld line. In this study, a neural network based on the generalized delta rule algorithm was adapted for the process control of GMA, such as welding speed, arc voltage and wire feeding speed.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1830-1835
• /
• 2015

In this paper, we propose an algorithm for the automatic registration of two rigid parts using multiple 3D sensor systems on a robot. Four sets of structured laser stripe system consisted of a camera and a visible laser stripe is used for the acquisition of 3D information. Detailed procedures including extrinsic calibration among four 3D sensor systems and hand/eye calibration of 3D sensing system on robot arm are presented. We find a best pose using search-based pose estimation algorithm where cost function is proposed by reflecting geometric constraints between sensor systems and target objects. A pose with minimum gap and height difference is found by greedy search. Experimental result using demo system shows the robustness and feasibility of the proposed algorithm.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.86-96
• /
• 2011

The human-following is one of the significant procedure in human-friendly navigation of mobile robots. There are many approaches of human-following technology. Many approaches have adopted various multiple sensors such as vision system and Laser Range Finder (LRF). In this paper, we propose detection and tracking approaches for human legs by the use of a single LRF. We extract four simple attributes of human legs. To define the boundary of extracted attributes mathematically, we used a Support Vector Data Description (SVDD) scheme. We establish an efficient leg-tracking scheme by exploiting a human walking model to achieve robust tracking under occlusions. The proposed approaches were successfully verified through various experiments.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.2
• /
• pp.124-132
• /
• 2001

Autonomous of welding process in shipyard is ultimately necessary., since welding site is spatially enclosed by floors and girders, and therefore welding operators are exposed to hostile working conditions. To solve this problem, a welding robot that can navigate autonomously within the enclosure needs to be developed. To achieve the welding ra나, the robotic welding systems needs a sensor system for the recognition of the working environments and the weld seam tracking, and a specially designed environment recognition strategy. In this paper, a three-dimensional laser vision system is developed based on the optical triangulation technology in order to provide robots with work environmental map. At the same time a strategy for environment recognition for welding mobile robot is proposed in order to recognize the work environment efficiently. The design of the sensor system, the algorithm for sensing the structured environment, and the recognition strategy and tactics for sensing the work environment are described and dis-cussed in detail.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.713-716
• /
• 2000

In this study, we present a mobile robot for ultrasonic scanning of weldment. magnetic Caterpillar mechanism is selected in order to travel on the inclined surface and vertical wall. A motion control board and motor driver are developed to control four DC-servo motors. A virtual device driver is also developed for the purpose of communicating between the control board and a host PC with Dual 'port ram. To provide the mobile robot with stable and accurate movement, PID control algorithm is applied to the mobile robot control. And a vision system for detecting the weld-line are developed with laser slit beam as a light source. In the experiments, movement of the mobile robot is tested inclined on a surface and a vertical wall.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1255-1258
• /
• 2008

Roll to roll (R2R) system, known as 'web processing', is the process of producing these electronic devices on a roll of flexible plastic. With the need of improved performance and productivity in R2R industry, effective control and on-line supervision for web quality is essential. In this report, we present a system for on-line measurement of wrinkles, one of defects incurring due to compressive stresses developed in the web. This system is able to capture an image generated when a well defined line shape laser beam passes through a transparent web. The system calculates 3D shape information, including the height of the wrinkle on the web, and displays the images for the shape information of the web in real time. By using area scan camera and machine vision laser, this system takes more advantages of setting up as a simple and low cost system compared to the line scan camera systems that widely used in web manufacturing. Specific calibration method and analysis on the achievable accuracy will be discussed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.566-571
• /
• 2009

A calibration method for multiple sets of stereo vision cameras is proposed. To measure the three-dimensional shape of a very long object, measuring the object at different viewpoints and registration of the data are necessary. In this study, two lasers beams generate two strings of calibration targets, which form straight lines in the world coordinate system. An evaluation function is defined to calculate the sum of the squares of the distances between each transformed target and the fitted line representing the laser beam to each target, and the distances between points appearing in the data sets of two adjacent viewpoints. The calculation process for the approximation method based on data linearity is presented. The experimental results show the effectiveness of the method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.558-561
• /
• 2002

A CCD camera with a laser strip was applied to realize the automation of welding Process in GMAW. It takes relatively long time to process image on-line control using the basic Hough transformation, but it has a tendency of robustness over the noise such spatter and arc light. The adaptive Hough transformation was used to extract the laser stripe and to obtain specific weld points In this study, a neural network based on the generalized delta rule algorithm was adapted for the process control of GMA, such as welding speed, arc voltage and wire feeding speed.

• Journal of Welding and Joining
• /
• v.12 no.2
• /
• pp.28-38
• /
• 1994

고속 연속용접시 필연적으로 발생하는 용접선의 오차를 감소하는 방법으로 용접선 추적을 하게 되는데, 본 연구에서는 근래에 상용화된 전자기식 방식과 레이저 시각 방식을 이용하여 용접시 발생할 수 있는 용접선의 형태에 대하여 용접선 추적을 실험하였다. 이 시험을 통하여 각각의 방식에는 고유의 특성을 가지고 있음을 알았다. 효율적인 용접 자동화 시스템을 구성하기 위하여, 용접하고자 하는 대상물 및 시스템에 대하여 적절한 센서의 선택이 선행되어져야 할 것이다. 본 연구실은 수행중인 레이저 용접 자동화 시스템 구성을 할 예정이다. 끝으로 위와 같은 용접선 추적장치는 전량을 수입에 의존하고 있는 실정이다. 보편적인 센서 시스템의 개발보다는 구축 하고자 하는 시스템에 알맞는 센서의 개발이 선행되어야 할 것으로 생각된다.