• 한국정보통신학회논문지
• /
• 제8권1호
• /
• pp.96-101
• /
• 2004

망막 두께 측정은 망막을 3차원으로 촬영하고 고속으로 신호처리를 할 수 있는 시스템을 필요로 한다. 본 논문에서는 망막을 촬영하여 3차원 영상으로 구성하기 위한 촬영장치 및 16채널 고속 영상 획득 시스템 개발내용을 소개한다. 망막에 HeNe 레이저를 투사하여 망막에서 반사되어 돌아오는 레이저의 양을 array photo diode로 감지한 후에 이를 3차원으로 형상화함으로써 망막의 두께를 측정한다. 망막에 레이저를 투사하는 장치, APD 광 센서를 이용한 망막 영상화 장치, 16 채널 실시간 A/D 변환 장치 및 PCI 마스터 인터페이스 장치를 개발하였다.

• 한국전자파학회논문지
• /
• 제24권1호
• /
• pp.91-97
• /
• 2013

지표면의 후방 산란 계수를 계산하는 지표면 산란 모델의 입력 변수로는 크게 수분함유량과 지표면 거칠기가 있고, 산란 계수 계산에 있어 지표면 거칠기의 영향이 수분함유량의 영향보다 크다. 본 연구에서는 지표면 거칠기의 정확한 측정 방법을 제기하고, 측정 오차를 분석한다. 이를 위하여 대표적인 지표면 거칠기 측정 장치인 pin-board profiler(1 m, 0.5 cm 간격)와 laser profiler(1 m, 0.25 cm 간격)를 이용하여 실제 지표면을 측정하였다. 두 측정 장치의 평균 차이는 유효 높이(RMS height)가 0.097 cm, 상관 길이(correlation length)가 1.828 cm이었다. 그리고 상관 함수, 상대오차를 분석한 결과, laser-profiler의 반복 측정에 대한 장치의 안전성이 더 좋았다. 두 측정 장치의 차이가 후방 산란 계수에 미치는 영향을 분석하기 위해 지표면 산란 모델을 이용하여 비교한 결과, 입사각 $20{\sim}60^{\circ}$에서 1 dB 이하의 차이를 보였다.

• 한국전문물리치료학회지
• /
• 제28권1호
• /
• pp.36-46
• /
• 2021

Background: It is reported that the proprioceptive sensation of patients with neck pain is reduced, and neck sensory-motor control training using visual feedback is reported to be effective. Objects: The purpose of this study is to investigate how sensorimotor control training for the cervical spine affects pain, function, and psychosocial status in patients with chronic cervical pain. Methods: The subjects consisted of 36 adults (male: 15, female: 21) who had experienced cervical spine pain for more than 6 weeks. An exercise program composed of cervical stabilization exercise (10 minutes), electrotherapy (10 minutes), manual therapy (10 minutes), and cervical sensorimotor control training (10 minutes) was implemented for both the experimental and the control groups. The cervical range of motion (CROM) and head repositioning accuracy were assessed using a CROM device. In the experimental group, the subjects wore a laser device on the head to provide visual feedback while following pictures in front of their eyes; whereas, in the control group, the subjects had the same training of following pictures without the laser device. Results: There were no statistically significant differences between the two groups in pain, dysfunction, range of motion, or psychosocial status; however, post-test results showed significant decreases after 2 weeks and 4 weeks compared to baseline (p < 0.01), and after 4 weeks compared to after 2 weeks (p < 0.01). The cervical joint position sense differed significantly between the two groups (p < 0.05). Conclusion: In this study, visual feedback enhanced proprioception in the cervical spine, resulting in improved cervical joint position sense. On the other hand, there were no significant effects on pain, dysfunction, range of motion, or psychosocial status.

• 대한물리의학회지
• /
• 제10권4호
• /
• pp.15-23
• /
• 2015

PURPOSE: We aims to promote the development of proprioception measurement using smartphones, goniometers, and laser pointers as compared to the conventional use of electrogoniometer measurement. METHODS: Measurements using an electrogoniometer were previously proved to be reliabile and valid. Among E-university students, 20 who had no fracture, operation history, or inflammatory arthritis were examined. These subjects had not performed regular exercise in the past 3 months. Proprioception measurements were performed using four different measurement tools, three times per day, for test-retest analysis. RESULTS: No notable test-retest differences were noted for any of the measurement methods (P>0.05). With regard to the test-retest reliability for each measurement method, we observed that the readings from both the electrogoniometer and smartphone have high reliability (ICC>0.80), whereas the readings from the laser pointer have moderate reliability (ICC>0.60). When assessing the concurrent validity between electrogoniometers with individual measurements, we did not observe any notable difference between the smartphone and electrogoniometer (P>0.05) and these tools in fact showed high correlation (r>0.60, P<0.05) and a moderate reliability (ICC>0.60). Moreover, there was no notable difference in between electrogoniometers and laser pointers (P<0.05). CONCLUSION: CONCLUSION: The findings of this suggested that proprioception can be measured by using smart-phones, and proved that this method has sufficient credibility. Moreover, we noted that the concurrent validity with smartphones was high in comparison with the conventional electrogoniometer, which also indicates the validity and credibility. Based on these findings, we conclude that the measurement of proprioception by using a smartphone can be widely adopted.

• 소음진동
• /
• 제8권5호
• /
• pp.841-848
• /
• 1998

In the gear manufacturing, tooth modification is usually applied for the prevention of tooth impact during the loading. In contrary, tooth profile error causes amplifying the whine noise which is cumbersome to reduce in the automobile gear box. So optimum quantity of the modifications must be obtained for the good performance in the vibrational sense. In this paper, a formulation to define the tooth curve by considering the profile manufacturing error and loading deformation of the gear tooth is suggested and the transmission error and loading deformation of the gear tooth is suggested and the transmission error with modified tooth in the gear system is evaluated. A pair of gear set is mathematically modelled. The equivalent excitation in the gear vibratonal model is formulated. For the experimental evaluaton on the derived transmission error function, a simple geared system is set up in which the gears are designed to give pre-designed tooth profile modification and manufactured by CNC Wire Cutting Machine. Under slow speed operaton, the transmission error of the gear pair is measured by using two rotational laser vibrometers, compared with the calculated one of which the result shows good agreement.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.225-232
• /
• 2007

A tooth profile modification for loaded gears is used to avoid a tooth impact. Since a tooth profile error causes amplification of the cumbersome whine noise in automotive gear transmissions, an optimal quantity of tooth profile modifications must be obtained for good performance in the vibration sense. In this paper, a tooth profile modification curve considering profile manufacturing errors and elastic deformation of the gear tooth is formulated; in addition, transmission errors of the gear system with modified teeth are verified. The equivalent excitation due to transmission errors is formulated. For experimental evaluation of the transmission error, the transmission error for a simple gear system was measured by two rotational laser vibrometers. Finally, we perform a comparative analysis between the calculated and measured responses to the excitations due to the transmission error to verify the practicability of the application to automotive transmissions.

• 한방안이비인후피부과학회지
• /
• 제20권1호통권32호
• /
• pp.228-238
• /
• 2007

Objectives ; Sasang Constitional Medicine is a part of Korean traditional Medicine, and classify human constitution into four types. Scalp and hair is a part of skin. Skin is one of constitutional charasteristic element. So we researched a correlation between Sasang constitutions and Korean adult scalp and hair condition. This is a basic study to find constitution can be a important factor to care scalp and hair. Methods ; We examined Sasang constitutions and scalp and hair condition of 80 human who aged from 20-50. Scalp disease, dandruff was observed by video micro scope and sebum tape diagnosis. Thickness of hair was measured by Laser Scan Micrometer(LSM-3100). Itching sense and life habit was also investigated. Constitution diagnosis and scalp, hair diagnosis was investigated seperately as a blind test and the data was statistically analyzed with chi-square test, correlation analysis, one-way analysis of varience. Results ; 1. In Sasang Constitution, Taeumin group had significant tendency of oilily scalp. 70% of Taeumin group had oilily scalp. 2. The group of dry or oilily scalp had more itching sense and more sensativity of scalp compaired to neuter scalp group. 3. There was no correlation between height, weight, thickness of hair, itching sense, scalp disease and Sasang constitution. 4. There was correlation between loss of hair and drinking alcohol, obesity, curly hair, soft scalp. Conclusions ; Korean adult scalp and hair condition had correlation with Sasang constitution.

• 한국지능시스템학회논문지
• /
• 제21권5호
• /
• pp.667-672
• /
• 2011

본 논문은 AGV(automatic guided vehicle)의 위치측정 정밀도 향상을 위해 UKF(unscented Kalman filter)를 이용한 위치 측정 센서의 융합 방법에 관한 연구이다. 기존의 AGV를 위한 유도 방법에는 유선 유도 방식과 마그네틱 유도 방식이 있었다. 이들은 정밀도가 높고 반응속도가 빠르기 때문에 대부분의 유연 생산 시스템에서 사용되어지고 있었다. 하지만 이러한 방법들은 유지 보수에 대한 지속적인 노력과 비용의 문제가 발생되었고 완성된 경로의 변경이 어렵다는 단점이 있었다. 이러한 문제들을 해결하기 위해, 최근에는 레이저 내비게이션을 이용한 유도방식으로 변경되고 있는 추세이다. 레이저 내비게이션은 벽면에 설치된 반사체를 측정하여 전역위치를 측정하는 장치로써 정밀도가 높고 경로 변경에 유연하다는 장점이 있다. 하지만 이 또한, 응답속도가 느리고 AGV의 주행 중 발생되는 반사체 계측 오차에 따라 위치측정 정밀도가 낮아진다는 단점이 있다. 이에 본 논문에서는 UKF를 이용하여 응답속도가 빠른 지역위치센서와 레이저 내비게이션의 센서융합 방법을 제안한다. 제안된 방법은 주행 중 발생되는 센서들의 오차를 분석하고 이에 따른 모델을 설계하여 위치측정 정밀도를 향상 시키는 방법이다. 본 논문에서는 실험을 위해서 직접 설계한 차축구동 방식의 지게차 AGV를 이용하여 제안한 방법의 결과와 레이저 내비게이션의 위치측정 결과를 비교하였다. 실험 결과, 제안된 방법이 레이저 내비게이션의 위치 측정 결과보다 16% 만큼 정밀도가 향상되는 것을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.542-544
• /
• 2002

This paper proposes a wavelength sensor based on the optical directional coupler. The finite-difference time-domain (FDTD) is used in analysis of the field intensity of tile light propagating thorough the structure. The device with tile width of 0.4 $\mu\textrm{m}$ and the thickness of 0.4 $\mu\textrm{m}$, which corresponding with the coupling length of 40$\mu\textrm{m}$, would provide tile linear relationship between the coupling efficiency against the wavelength. The device can sense the wavelength in a range between 1.5$\mu\textrm{m}$ and 1.6$\mu\textrm{m}$, with continuous resolution. The wide wavelength could be also done be paralleling th light to a number of wavelength-sensing modules with particularly required bands. Therefore, it could be employed as the wavelength sensing for most optical communications, optoelectronics, laser applications and etc.

• 한국정밀공학회지
• /
• 제27권4호
• /
• pp.33-39
• /
• 2010

Manufacturing accuracy of a precision instrument was essential to stability and efficiency of the product. Accordingly, geometrically accuracy management of precision instrument was very becoming the technique in order to design and manufacturing for machine. In this study, Measuring System is developed for extra long roller using non-contact sensor. Futhermore, It's studied by Geometric Tolerance. Exact roundness is obtained to Least Squares method from the reference circle of measured data. Measuring System is analyzed point of measurement and straightness of extra long roller is evaluated by FEM.