• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.325-326
• /
• 2004

Experiment of laser propulsion in free flight has never been conducted. At Institute of Fluid Science (IFS), Tohoku University, propulsive impulse generation by focusing on a rest projectile was demonstrated. Based on the ideas obtained from this experiment, experiment of laser propulsion of a projectile in flight by focusing $CO_2$ laser beam is being prepared for. The objective velocity increment in experiment is about 50 m/s.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.271-277
• /
• 2004

As one of the concepts of the laser/electric hybrid propulsion system, a feasibility study on possibilities of electrostatic acceleration of a laser ablation plasma induced from a solid target was conducted. Energy distributions of accelerated ions were measured by a Faraday cup. A time-of-flight measurement was also conducted for ion velocity measurement. It was found that an average speed of ions from a pure laser ablation in this case was about 20 km/sec for pulse energy of 40 $\mu$J/pulse with pulse width of 250 psec. On the other hand, through an electrostatic field with a + I ,000 V electrode, the speed could be accelerated up to 40 km/sec. It was shown that the electrode with positive potential was more effective than that with negative potential for positive-ion acceleration in laser induced plasma, or pulsed plasma, in which ions were induced with the Coulomb explosion following electrons. In addition, the ion-acceleration or deceleration strongly depended on conditions of pairs of inner diameter and electrodes gap.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.320-324
• /
• 2004

Laser Propulsion is a device that generates thrust using laser energy. Laser-driven In-Tube Accelerator (LITA) has been developed at Tohoku University. LITA is a laser propulsion system that accelerates an object not in an open air but in a tube. Experiments of vertical launching and pressure measurement on the tube wall were carried out and in order to observe the initial state of plasma and blast wave, the visualization experiment was carried out using the shadowgraph method. In this study, the time variation of pressure on the tube wall is numerically simulated solving Euler equation. In order to model the laser energy, heat source function added to the frozen flow Euler equation. Plasma size from the shadowgraph images was used for the initial condition of laser energy input. For verification of the modeling, these results were compared with the previous experimental and numerical results. From these verifications, an analysis of LITA performance will be investigated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.57-61
• /
• 2004

레이저 추진의 개념을 이용한 공기 흡입 레이저 스파이크 엔진은 대기권 내의 비행체에 사용될 수 있다. 레이저 스파이크 엔진은 연소 과정 대신 레이저 에너지에 의해 유도된 폭풍파에 의해서 추력을 얻는다. 그리고 이 엔진은 공기를 추진제로 사용하기 때문에 추진제를 따로 탑재할 필요가 없다. 실험에서는 초음속 풍동과 스파크 발생기를 사용하였다. 2차원 레이저 스파이크 엔진 모형을 사용하여 유동을 가시화 하였으며, 동일한 형태에 대한 수치 해석을 시행하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.39-42
• /
• 2003

We studied the vertical launch performance of the Laser-driven In-Tube Accelerator (LITA). This device is primarily characterized by accelerating a projectile in a tube. Owing to the confinement effect, the thrust performance is enhanced. The driver gas can be specified and its pressure be turned so that the impulse performance is optimized. In the experiments, a 3.0-gram projectile was vertically launched. The effects of the projectile exit condition, the laser beam incident direction and the driver gas species were experimentally studied.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.294-299
• /
• 2004

An assessment of a novel laser-electric hybrid propulsion system was conducted, in which a laser-induced plasma was induced through laser beam irradiation onto a solid target and accelerated by electrical means instead of direct acceleration only by using a laser beam. A fundamental study of newly developed rectangular laser-assisted pulsed-plasma thruster (PPT) was conducted. On discharge characteristics and thrust performances with increased peak current compared to our previous study to increase effects of electromagnetic forces on plasma acceleration. Maximum peak current increased for our early study by increasing electromagnetic effects in a laser assisted PPT. At 8.65 J discharge energy, the maximum current reached about 8000 A. Plasma behaviors emitted from a thruster in various cases were observed with an ICCD camera. It was shown that the plasma behaviors were almost identical between low and high voltage cases in initial several hundred nanoseconds, however, plasma emission with longer duration was observed in higher voltage cases. Canted current sheet structures were also observed in the higher voltage cases using a larger capacitor. With a newly developed torsion-balance type thrust stand, thrust performances of laser assisted PPT could be estimated. The impulse bit and specific impulse linearly increased. On the other hand, coupling coefficient and the thrust efficiency did not increase linearly. The coupling coefficient decreased with energy showing maximum value (20.8 ？Nsec/J) at 0 J, or in a pure laser ablation cases. Thrust efficiency first decreased with energy from 0 to 1.4 J and then increased linearly with energy from 1.4 J to 8.6 J. At 8.65 J operation, impulse bit of 38.1 ？Nsec, specific impulse of 3791 sec, thrust efficiency of 8 %, and coupling coefficient of 4.3 ？Nsec/J were obtained.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.251-256
• /
• 2004

A concept in which laser-sustained plasmas (LSPs) are combined with inductively coupled plasmas (ICPs) is proposed. The concept is aiming at extensions of operative conditions of a CW laser thruster due to the fact that the ICP has some characteristics which are in contrast to those of LSPs. An estimation confirmed that the concept would effectively work. And a fundamental experiment was conducted. The results showed that the radio frequency magnetic field induced by a alternate current of 13.56 MHz coupled inductively with LSPs, resulting in the enlargement of the plasma region and the attainment of the enthalpy. It is expected that some improvements will enable to transfer the RF power to the work gas more effectively and to demonstrate the synergy effect between the LSPs and the ICPs.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.169-176
• /
• 2022

Laser ablation propulsion(LAP) is the method to create impulse by laser ablation. It can be used to deorbit the space debris(SD), as its long-range property and versatility on any material. In this paper, we find out several requirements of the LAP system(LAPS) to deorbit the SD by simple numerical calculations of the SD orbit and laser beam flux. As a result, minimum operable altitude angle turned out to be a crucial variable to the LAPS. Moreover, if minimum operable altitude angle is 10°, and if the minimum distance between the LAPS and the SD is below 450 km, 1 m/s² is sufficient to deorbit the SD by once. With 18 kJ/3 ns pulsed laser and cube shaped 100 kg SD, 1 m/s² acceleration can be achieved by increasing the pulse repetition rate over 34~53 Hz, depending on the size of the SD. This capability could compare with the conceptual design of the Japan Establishment for a Power-laser Community Harvest(J-EPoCH) facility, which include 8 kJ, 5 PW@100 Hz laser.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.365-368
• /
• 2009

마이크로 나노 급 위성의 자세제어를 위한 소형 추력 장치로써, 펄스 에너지를 활용한 새로운 추력기의 개발 연구를 진행 중이다. 레이저 추진은 연료를 탑재하지 않기 때문에 경량화 및 비용 절감이 가능하고 펄스 에너지 레벨을 조절하여 목적에 적합한 추력을 발생시킬 수 있다. 본 논문에서는 높은 추력 발생을 위하여 플라즈마 팽창 제한의 물질로 젤 형태의 물질을 적용하였다. 또한 pendulum system으로 속도를 측정하여 momentum coupling coefficient($C_m$)를 도출함으로써 추력 성능이 크게 향상되었음을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.349-352
• /
• 2007

In this paper, we describe the modeling of ablation based laser applications for innovative use in the military In the laser ignition system, a metal confinement is ablated with the high intensity pulsed energy, triggering a thermal ignition of the confined high explosives. The constitutive equations for the laser source, deformation of metals, and explosion of energetic materials are described.