• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권8호
• /
• pp.417-422
• /
• 2006

This paper presents the effect of driving waveform for piezoelectric bend mode inkjet printhead with optimized mechanical design. Experimental and theoretical studies on the applied driving waveform versus jetting characteristics were performed. The inkjet head has been designed to maximize the droplet velocity, minimize voltage response of the actuator and optimize the firing frequency to eject ink droplet. The head design was carried out by using mechanical simulation. The printhead has been fabricated with Si(100) and SOI wafers by MEMS process and silicon direct bonding method. To investigate how performance of the piezoelectric ceramic actuator influences on droplet diameter and droplet velocity, the method of stroboscopy was used. Also we observed the movement characteristics of PZT actuator with LDV(Laser Doppler Vibrometer) system, oscilloscope and dynamic signal analyzer. Missing nozzles caused by bubbles in chamber were monitored by their resonance frequency. Using the water based ink of viscosity of 4.8 cps and surface tension of 0.025 N/m, it is possible to eject stable droplets up to 20 kHz, 4.4 m/s and above 8 pl at the different applied driving waveforms.

• 한국정밀공학회지
• /
• 제28권1호
• /
• pp.73-79
• /
• 2011

Inkjet printhead may have a lot of nozzles to increase productivity as a manufacturing tool. So, the uniformity of jetting performance among a lot of nozzles has been one of the key issues in inkjet technology In this study, we investigated the cross-talk effect which should be reduced for uniform jetting performance among a lot of nozzles. Due to the cross-talk, the jetting performance of a nozzle can be affected when neighboring nozzles are firing. For experimental study, we used commercial inkjet head SE-128 from Dimatix. To understand the cross-talk effect of SE-128 head, we measured the change in jetting speed of a nozzle when neighboring nozzles are jetting. The measured jetting speed was compared to the case of one nozzle jetting. Also, we used laser vibrometer to measure change in pressure wave due to cross-talk. As a result of the cross-talk, the jetting speed can become faster or sometimes slower depending on firing nozzle location. If the all nozzle are jetting, the jetting speed of a nozzle became slower because the pressure wave for jetting is reduced.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.59-72
• /
• 1998

This experimental study was carried out to investigate the characteristics of the in-cylinder eccentricity swirl flow generated by a 4 valve cylinder head with a tangential and a helical intake port. the measurements of the in-cylinder velocity field have been made by a two-channel LDA system. The mean flow coefficient(Cf(meam)), swirl ratio(Rs) and mass flowrate with valve eccentricity ratios and an intake port partition between the two intake ports were measured in the steady flow test fig using the ISM(impulse swirl meter). The experimental results indicated that the mass flowrate through the tangential intake port was 19% and 7.7% more than that of the helical intake port in case of with and without intake port partition respectively. There was a tendency to be a single rotation flow in swirl flow fields formed by a 4 valve cylinder head because of the interaction between the two intake ports. As the intake port partition was not set between flow coefficient(Cf(mean)) was 7.35%.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.951-951
• /
• 2005

The characteristics of Boussinesq starting forced plumes were investigated in this study. Two distinct periods in the transient plume penetration were identified, namely the Period of Flow Development (PFD) and Period of Developed Flow (PDF). PFD refers to the time period whereby the penetration rate is governed by the complex vortex dynamics initiated by the exit conditions that can include vortex coalescence, vortex leapfrogging, pinching off of the head vortex from the trailing stem and the eventual reconnection. The pinch-off and reconnection leads to an overshoot of the plume front which is a common observation reported in previous studies. The penetration rate in PDF is more predictable and depends on the continuous feeding of buoyancy and momentum into the head vortex by the trailing buoyant-jet stem. Similarity solutions are developed for PDF to describe the temporal variation of the penetration rate, by incorporating the behavior of an isolated buoyant vortex ring and recent laboratory results on the trailing buoyant jet. In particular, the variations of velocity ratios between the head vortex and trailing buoyant jet are analytically computed. To verify the similarity solutions, experiments were conducted on vertical starting forced plumes using planar laser induced fluorescence (PLIF).

• 한국광학회지
• /
• 제8권2호
• /
• pp.161-164
• /
• 1997

편광유지 광섬유를 이용한 주파수가 안정화된, 두 개의 서로 수직으로 편광된 종모우드를 갖는 He-Ne레이저 빛을 LoTa $O_{3}$ 위상변조기로 구성된 센서부(sensor head)로 전달해 줌으로써 원격에서 전기장을 측정할 수 있는 hybrid, heterodyne 간섭식 센서를 구성하였다. In/quadrature-phase위상변조풀이 방식을 이용하여 전기광학 효과에 의해 서로 수직으로 편광된 두 모우드 사이에 유도된 위상차이를 측정함으로써 항상 높은 검지율을 유지할 수 있는 전기장 센서를 구성하고, 이를 이용하여 광학 물질에 유도된 복굴절도 측정을 할 수 있었다.

• 대한후두음성언어의학회지
• /
• 제27권2호
• /
• pp.126-129
• /
• 2016

Rhabdomyosarcoma is an uncommon type of soft tissue malignant neoplasm characterized by undifferentiated mesodermal tissue. Sarcomas account for approximately 1% of all laryngeal neoplasm and rhabdomyosarcomas are the rarest sarcoma found in the larynx. When the sarcoma involves the larynx, radical surgery such as laryngectomy has been considered. With recent advances of combined therapy, however, it can be treated by conservative surgeries followed by postoperative radiotherapy and/or pulse chemotherapy. With reviews of literature, we report a 47-year-old patient complaining of husky voice and throat discomfort who was finally diagnosed as rhabdomyosarcoma of the vocal fold and successfully treated by laser cordectomy followed by adjuvant chemoradiotherapy.

• 대한후두음성언어의학회지
• /
• 제26권2호
• /
• pp.133-136
• /
• 2015

Spindle epithelial tumor with thymus-like differentiation (SETTLE) is an extremely rare type of thyroid tumor, with spares reports on its clinical course. SETTLE is derived from branchial pouch or thymic remnants, and classified as a low grade, malignant neoplasm due to its indolent growth and tendency to develop delayed metastasis. Therefore, stringent initial workups and long-term follow-up are required to prevent misdiagnosis. We present a case of recurrent spindle epithelial tumor with thymus-like differentiation (SETTLE) in the glottis of 57 year-old male patient, who had a history of surgical excision for the SETTLE from the thyroid gland 5 years ago. Transoral CO2 laser surgery was performed to remove the glottic tumor and there was no evidence of local recurrence at 11 months postoperatively.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.22-25
• /
• 2008

The dynamic response of the head arm assembly (HAA) of a hard disk drive to an impact load was obtained from a 3D non-linear finite element model using ANSYS/LS-DYNA and from experiments using a modified levitation mass method (LMM). In the finite element model, the impact load was created by modeling the mass as a rigid body and making it collide with the HAA. The velocity, displacement, acceleration, and inertial force of the mass were then obtained from the time history data of the finite element analysis. In the LMM, a mass that was levitated with an aerostatic linear bearing, and hence encountered negligible friction, was made to collide with the actuator arm, resulting in a dynamic bending test for the arm. During the collision, the Doppler frequency shift of the laser beam reflected from the mass was accurately measured with an optical interferometer. The velocity, displacement, acceleration, and inertial force of the mass were accurately calculated from the measured time-varying Doppler frequency shift. A good correlation between the experimental data and FEA results was observed. The FEA was also used to investigate the dynamic response of the HAA to impact by different masses.

• 대한후두음성언어의학회지
• /
• 제32권2호
• /
• pp.104-108
• /
• 2021

The etiology of laryngeal hemangioma is unclear, and it is classified into infant and adult types. The former is capillary hemangioma and relatively common, the latter is cavernous type and very rare. The adult laryngeal hemangioma mainly occurs in supraglottis and glottis. A 75-year-old man came to our clinic with a voice change that started four months ago. The laryngoscopic finding showed that the surface of oval-shaped mass is covered with turbid exudates. We performed the laryngeal microsurgery with CO₂ laser. The mass was pathologically proven as cavernous hemangioma. We report a very rare and didactic case with review of relevant literature.

• 대한후두음성언어의학회지
• /
• 제22권2호
• /
• pp.133-136
• /
• 2011

Background and Objectives : Previous jet ventilation is not becoming more common because of high price, making loud noise, and causing a movement of the vocal cords due to the jet stream. So we designed a new type of manually controlled jet ventilation using previous laryngoscope and introduced it's clinical application. Materials and Method : A prospective study involved 20 patients all having undergone surgical intervention under new type of manually controlled jet ventilation from June 2009 to January 2011. The prospective study was to assess the vital sign and operative and postoperative complications. Results : The Manually Controlled Jet Ventilation were performed in 20 patients. 50% of the patients have Post-located laryngeal lesion, 20% with tracheal stenosis, 20% with glottic cancer biopsy and laser cordectomy, 10% with postglottic stenosis. Conclusion : Manually Controlled Jet Ventilation (Manujet) can be used for airway surgery.