• 한국항공우주학회지
• /
• 제39권3호
• /
• pp.210-217
• /
• 2011

대칭익형 단면을 가지는 모형 깃 끝와류의 후류유동구조의 전개과정을 관찰하기 위하여 2차원 LDV 시스템을 이용하여 끝와류의 회전성분과 축성분을 상평균 기법으로 측정하였다. 비대칭익 로터 깃의 특징에 비하여 대칭익 로터깃의 끝와류는 $27^{\circ}$ 부근까지 성장 과정이 진행되어 다소 늦게 형성되었으며 그 이후부터 상대적으로 완만하게 확산모드가 진행되었다. 회전성분은 실험이 진행된 $360^{\circ}$ 까지 Vatistas의 n=2모델에 우수한 접근성을 보이면서 자기상사성을 갖는 것으로 관찰되었고 축방향성분은 비대칭익에 비하여 훨씬 강한 세기로 나타나면서 정규분포 성향을 나타내었다. 이들의 결과들은 대칭익의 경우 로터의 추력 발생면에서 끝단손실이 상대적으로 큰 것으로 확인이 되었다.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.999-1008
• /
• 2002

The spray structures and distribution characteristics of liquid and vapor phases in non-evaporating and evaporating Gasoline Direct Injection (GDI) fuel sprays were investigated using Laser Induced Exciplex Fluorescence (LIEF) technique. Dopants were 2% fluorobenzene and 9% DEMA (diethyl-methyl-amine) in 89% solution of hexane by volume. In order to study internal structure of the spray, droplet size and velocity under non-evaporating condition were measured by Phase Doppler Anemometry (PDA). Liquid and vapor phases were visualized at different moments after the start of injection. Experimental results showed that the spray could be divided into two regions by the fluorescence intensity of liquid phase: cone and mixing regions. Moreover, vortex flow of vapor phase was found in the mixing region. About 5㎛ diameter droplets were mostly distributed in the vortex flow region. Higher concentration of vapor phase due to vaporization of these droplets was distributed in this region. Particularly, higher concentration of vapor phase and lower one were balanced within the measurement area at 2ms after the start of injection.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.382-389
• /
• 2001

In the present study, local heat transfer rates for co-rotating disks with two modified hubs having ventilation holes are investigated for Rossby number of 0.04, 0.1 and 0.35 to evaluate the influence of incoming flows through hub holes. A naphthalene sublimation technique is employed to determine the detailed local heat/mass transfer coefficients on the rotating disks using the heat and mass transfer analogy. Flow field measurements are conducted using Laser Doppler Anemometry (LDA) and numerical calculations are performed simultaneously to analyze the flow patterns induced by the disk rotation. The basic flow structure in a cavity between co-rotating disks consists of three regions; the solid-body rotating inner region, the outer region with turbulence vortices and the shroud boundary layer region. The heat/mass transfer. rates on the co-rotating disks are very low near the hub due to the solid-body rotation and those increase rapidly in the outer region due to turbulence mixing. The modified hubs with ventilation holes enhances significantly the heat/mass transfer rates on the region near the hub. The results also show that the heat transfer of Hub-2 is superior to that of Hub-1, but Hub-1 is more profitable for destructing the solid-body rotating inner region.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.146-149
• /
• 2006

단일액체추진제 하이드라진 추력기의 인젝터로부터 발생하는 분무 특성을 파악하기 위해 입자영상유속계 및 레이저 도플러 유속계 기법을 적용하였다. 입자영상유속계를 이용하여 순간 평면 이미지를 획득하고 이 영상 자료를 통해 압력에 따른 분무정도 및 인젝터 분무성능을 판단하였다. 영상 이미지에서 누락된 분무 입자의 속도 및 입경 계측을 위해 레이저 도플러 유속계 계측방법을 적용하였다. 계측된 두 실험결과를 비교함으로써 분무 특성에 대한 명확한 이해 뿐만 아니라 인젝터 설계 변수 도출이 본 연구의 목적이다.

• 대한기계학회논문집B
• /
• 제21권6호
• /
• pp.793-803
• /
• 1997

This experimental study was mainly investigated on the swirl flow characteristics in the cylinder generated by a helical intake port. LDA system was used for the measurement of in-cylinder velocity fields. Tangential and axial velocity profiles, with varying valve lifts, valve eccentricity ratios and axial distance, were measured. When the intake valve was set in the cylinder center, we could find that in-cylinder swirl flow fields were composed of a forced vortex motion and a free vortex motion in the vicinity of the cylinder center and the cylinder wall respectively. In case of valve eccentricity ratio, N$_{y}$ = 0.45, the vortex flow which rotates to the opposite direction of a main rotating flow in the cylinder was found. And the reverse flow toward the cylinder head surface was also found in axial velocity profile and it showed the tendency of the linear decrease in the region of 0.leq.Y/B.leq.1.2.2.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.224-231
• /
• 2005

The present study investigates flow characteristics in an optical disc drive (ODD). Detailed knowledge of the flow characteristics is essential to analyze flow-induced noise and vibration, forced convection and flow friction loss. The ODD used in a personal computer is used for the experiment and rotating velocity of disc is under the 4500 rpm. Time-resolved velocity component and velocity spectrum are obtained using the laser Doppler anemometry (LDA), and the flow patterns induced by rotating disc in the ODD are calculated by a commercial finite volume method at the same time. The results show that the front holes reduce flow-induced noise and the position of pickup body only affects flow near the window. Furthermore, it is possible for cooling of heat sources in the drive through measuring the flow fields under the tray. In addition, the numerical results are well matched up to the experimental results, therefore, the validation of the numerical results can be achieved. From the validation of numerical results, it is possible to predict the flow characteristics of the region where it is unable to conduct the experiment.

• 대한기계학회논문집B
• /
• 제24권8호
• /
• pp.1029-1037
• /
• 2000

The present study investigates the local heat/mass transfer characteristics on a rotating disk which is the top disk covered with a shroud in HDD. The naphthalene sublimation technique is employed to determine the local heat/mass transfer coefficients on the rotating disk. Flow field measurements using Laser Doppler Anemometry (LDA) and numerical calculations are performed to analyze the flow patterns induced by the disk rotation. HDD has been developed for compactness and speedy data access, thus the rotating velocity of the disk is increased and the height of a hub is decreased. The experiments are conducted for the various hub heights of 5, 10 and 15 mm, for the rotating Reynolds numbers of $5.5{\times}10^4$ to $1.1{\times}10^5$ and for the effects of the presence of a read/write head arm. The results show that the heat transfer on the rotating disk is enhanced considerably for the decrease of the hub height and for the increase of the rotating Reynolds number. The head arm inserted in the cavity decreases the heat transfer despite the enhancement of tangential RMS velocity because of the deficit of the momentum in the flow field.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.799-804
• /
• 2007

액체추진제 추력기 연소실의 인젝터로부터 발생하는 분무 거동을 파악하기 위하여 광학계측 기법을 사용한다. 실험에 사용된 인젝터는 지름이 0.406 mm이며 중심축으로부터 30 의 경사각을 이루는 8 개의 노즐 구멍으로 구성된다. 분무생성의 초기조건과 분무발달에 따른 미립화 과정을 분석하기 위해, 이중모드 위상도플러속도계(DPDA)로 측정된 액적의 속도 및 입경 등의 변이 거동을 제시하고 Nd:Yag 레이저평면광에 의해 획득된 순간평면이미지와 함께 고찰한다. 분무액적의 초기 분사속도에 근거한 Re 수와 We 수 등의 무차원 변수를 도출하여 인젝터 발생 분무의 미립화 및 난류성질 등에 대한 분무유동 양식의 범주를 결정한다. 이러한 분무분열에 대한 정성적, 정량적 결과는 향후 새로운 추력기 개발에 확실한 설계 기반을 제공할 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제15권4호
• /
• pp.489-497
• /
• 1994

The most serious problems related to the cardiovascular prothesis are thrombosis and hemolysis. It is known that the flow pattern of cardiovascular prostheses is highly correlated with thrombosis and hemolysis. Laser Doppler Anemometry (LDA) is a usual method to get flow pattern, which is difficult to operate and has narrow measure region. Particle Image Velocimetry (PIV) can solve these problems. Because the flow speed of valve is too high to catch particles by CCD camera, high-speed camera (Hyspeed : Holland-Photonics) was used. The estimated maximum flow speed was 5m/sec and maximum trackable length is 0.5 cm, so the shutter speed was determined as 1000 frames per sec. Several image processing techniques (blurring, segmentation, morphology, etc) were used for the preprocessing. Particle tracking algorithm and 2-D interpolation technique which were necessary in making gridrized velocity pronto, were applied to this PIV program. By using Single-Pulse Multi-Frame particle tracking algorithm, some problems of PIV can be solved. To eliminate particles which penetrate the sheeted plane and to determine the direction of particle paths are these solving methods. 1-D relaxation fomula is modified to interpolate 2-D field. Parachute artificial heart valve which was developed by Seoul National University and Bjork-Shiely valve was testified. For each valve, different flow pattern, velocity profile, wall shear stress and mean velocity were obtained.

• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.301-316
• /
• 1995

아래를 향한 가열 수평 평판이 있는 수조에서의 자연대류 현상을 규명하기 위한 실험적, 해석적인 연구를 수행하였다. 이는 압력용기 하부에 용융물이 있을때 캐비티내에서의 열수력현상을 규명하기 위한 간단화된 모델에 관한 연구이다. 압력 용기는 하부에 가열평판이 부착된 직육면체 단열 상자로 모의하고 이 상자는 물이 차 있는 수조에 설치된다. 냉각기는 정상상태의 유동 조건을 만들기 위해 상자와 수조사이의 U자 형태의 유동 영역에 설치된다. 실제 압력용기 하부에서는 다상 유동이 발생할 확율이 크나본 연구는 복잡한 다상 유동의 열수력 현상을 규명하기 위한 첫 단계 시도로서 단상유체를 사용한 실험 및 해석 연구이다. 본 연구에서는 가열 평판 아래에서의 자연대류현상특성을 더욱 잘 이해하기 위해 LDV와 열전대를 사용하여 속도와 온도를 측정하였다. 또한 입자가 부상된 유동장을 사진 찍어 유동을 가시화 하였다. 실험결과는 다음과 같다. 유체는 가열판과 냉각기가 작동할 때 매우 효과적으로 전 유동장에 걸쳐 순환한다. 가열판 하부에서 유동이 정체된 영역이 있고 매우 얇은 열 경계층을 갖는 두드러진 온도의 성층현상이 관찰되었다. FLUTAN Code를 이용한 해석은 속도를 합리 적으로 예측할 수 있다는 결과를 보여 주었다.