• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.43-48
• /
• 2015

A focal length-correcting lens called the F-theta lens is required to compensate for the different focus on spot size due to the deflected incident laser beam. The F-theta lens was designed by the ray tracing method and fabricated by a 3D printer with polymer-based material. The designed F-theta lens is able to compensate for the focus on spot size by an incidence angle of 0 to 2 degrees. Based on the analysis of the simulation, there was almost no aberration in the $0^{\circ}C$ incidence angle, and the maximum of $50{\mu}m$ of aberration was observed at the incidence angle of $2^{\circ}$. Diffraction-encircled energy was analyzed to characterize the designed optics, and an image simulation was performed to confirm the actual image resolution.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.4-4
• /
• 2009

Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS) was welded through a combination of a diode laser and CNC. Laser beam passed the transparent PC and was absorbed in an opaque ABS. Polymers were melted and welded by absorbed and conducted heat. Experiments were carried out by varying working distance from 44mm to 50mm for the focus spot diameter control, laser input power from 10W to 25W, and scanning speed from 100 to 400mm/min. The weld bead size and the specimen cross-section were analyzed, and tensile results were presented through the joint force measurement. With focus distance at 48mm, laser power with 20W, and welding speed at 300mm/min, experimental results showed the best welding quality which bead size was 3.75mm and the shear strength was $22.8N/mm^2$. Considering tensile strength of ABS is $43N/mm^2$, shear strength was sufficient to hold two materials. A single process was possible in CNC machining processes, surface processing, hole machining and welding. As a result, the process cycle time was reduced to 25%. Compared to a typical process, specimens were fabricated in a single process, with high precision. By combining two operations processes developed process gained 50% more efficiency.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.555-559
• /
• 2016

A biodegradable nanofiber scaffolds using electrospining provide fibrous guidance cues for controlling cell fate that mimic the native extracellular matrix (ECM). It can create a pattern using conventional electrospining method, but has a difficulty to generate one or more pattern structures. Femtosecond(fs) laser ablation has much interested in patterning on biomaterials in order to distinguish the fundamental or systemic interaction between cell and material surface. The ablated materials with a short pulse duration using femtosecond laser that allows for precise removal of materials without transition of the inherent material properties. In this study, linear grooves and circular craters were fabricated on electrospun nanofiber scaffolds (poly-L-lactide(PLLA)) by femtosecond laser patterning processes. As parametric studies, pulse energy and beam spot size were varied to determine the effects of the laser pulse on groove size. We confirmed controlling pulse energy to $5{\mu}J-20{\mu}J$ and variation of lens maginfication of 2X, 5X, 10X, 20X created grooves of width to approximately $5{\mu}m-50{\mu}m$. Our results demonstrate that femtosecond laser processing is an effective means for flexibly structuring the surface of electrospun PLLA nanofibers.

• 한국광학회지
• /
• 제10권2호
• /
• pp.107-113
• /
• 1999

수차가 적은 홀로그래픽 스캐너는 기존의 렌즈나 거울과 같은 광학 소자의 사용 매수를 줄임으로써 제작 가격을 낮출 수 있다는 잠재적인 장점을 갖고 있다. 본 연구에서는 홀로그래픽 스캐너 설계에 광선 추적버블 적용하여 스캔 기능과 초점을 맺는 기능을 동시에 할 수 있는 홀로그래픽 광학 소자를 설계하였으며, 수차가 없는 직선의 스캔 라인을 얻기 위한 기록 및 재생 구조와 hologon 구조에 대해 조사하였다. Prototype으로 제작된 홀로그래픽 스캐너에서 bow는 전체 스캔 폭 300 mm에서 $\pm$133$\mu\textrm{m}$이었으며, spot의 크기는 100 $\mu\textrm{m}$ 이하로 얻을 수 있었다. 실험 결과 광선 추적을 이용한 설계 데이터의 유용성을 검증하였고 레이저 프린터나 디스플레이 분야 등으로의 응용 가능성을 제시하였다.

• Current Optics and Photonics
• /
• 제4권1호
• /
• pp.9-15
• /
• 2020

Fresnel zone plates have been widely used in many applications, such as x-ray telescopes, microfluorescence, and microimaging. To obtain an x-ray Fresnel zone plate, many fabrication methods, such as electron-beam etching, ion-beam etching and chemical etching, have been developed. Fresnel zone plates fabricated by these methods will inevitably lead to some nonideal factors, which have an impact on the focusing characteristics of the zone plate. In this paper, the influences of these nonideal factors on the focusing characteristics of the zone plate are studied systematically, by numerical simulations based on scalar diffraction theory. The influence of the thickness of a Fresnel zone plate on the absolute focusing efficiency is calculated for a given incident x-ray's wavelength. The diffraction efficiency and size of the focal spot are calculated for different incline angles of the groove. The simulations of zone plates without struts, with regular struts, and with random struts are carried out, to study the effects of struts on the focusing characteristics of a zone plate. When a Fresnel zone plate is used to focus an ultrashort x-ray pulse, the effect of zone-plate structure on the final pulse duration is also discussed.

• 한국안전학회지
• /
• 제6권2호
• /
• pp.21-30
• /
• 1991

In this paper, we study effect of waveness at the optical surface roughness measurement. In generally, waveness components cause errors in calculation of the roughness value of metal surface. We study about surface roughness signals In the frequency domain for separate two signal component of real roughness and waveness by digital signal processing methods. Thereafter, determine low and high Component of frequency spectrum. By this separating frequency value we design liner low and high pass filter which cutoff frequency is 1 Hz. After this process, converted each filtered spectrum by inverse discrete fourier transformation to time domain waveness and real roughness signals We calculate surface roughness value from filtered roughness signals. For evaluate this method, we use five specimens roughness signal which obtained from optical surface roughness measuring system in 3mm/s moving speed with 0.1 mm laser beam spot size As a result, we obtain more linerized roughness value than that of unfiltered roughness signals.

• 대한의용생체공학회:의공학회지
• /
• 제24권4호
• /
• pp.319-328
• /
• 2003

본 논문은 광역학적 암치료를 위한 광원장치의 개발로서 반도체 다이오드 레이저를 이용한 의료용 레이저 시스템의 개발이 목적이다. 광역학적 암 치료에서 이상적인 광원장치는 초점크기를 조절할 수 있으면서 발산하지 않는 균일한 빛과 특정 파장대의 안정성을 갖는 것이다. 본 연구에서는 이러한 점을 고려하여 635nm 파장대의 다이오드 공진기를 이용하였으며, 개발된 레이저 시스템은 제어장치를 사용하여 정교하고 안정적인 출력을 가지도록 하였으며, 시스템은 사용자의 편리성을 고려하여 소형화하였다. 다이오드 레이저시스템의 펄스 형태의 발진모드에서는 초기의 돌입전류에 의해 공진기를 파손시킬 수 있으므로 본 연구에서는 이러한 현상을 회로적으로 보완하여 msec 단위로 on/off 할 경우에도 공진기에 전혀 손상을 입히지 않도록 설계를 하였다. 임상의가 편리하게 방사시간을 설정하고, 연속출력. 펄스. 버스트 펄스, 슈퍼펄스를 방사할 수 있도록 고안하여. 다양한 암조직의 상태에 따라 치료할 수 있도록 구현하였다. 실험결과 레이저의 출력은 입력전류와 시간에 따라 10mW에서 300mW 까지 선형적으로 증가함을 보였다. 개발된 광역학적 레이저 시스템은 고속제어가 가능하고 정 전류 제어와 효과적인 냉각 제어를 통해 안정적으로 정확하게 출력할 수 있었다.

• 한국광학회지
• /
• 제7권4호
• /
• pp.434-439
• /
• 1996

본 연구에서는 가우스 진폭을 갖는 입사광의 단락된 정도와 광학 디스크 상의 bump의 형태가 재생신호에 미치는 영향과 디스크 bump에 맺히는 회절광 PSF(point spread function)와의 관계를 알아보기 위해 스칼라 회절 이론을 사용하였다. 단락된 가우스 진폭으로 .sigma.=0, 0.5, 1.5, 2.5인 경우를 고려하였으며 bump의 높이는 n.DELTA.$_{o}$ =.lambda./4로서 이는 위상 높이 .PHI.$_{o}$ =.pi.가 된다. 또한 본 연구에서 고려한 bump 형태 즉 직사각형(.DELTA.p$_{o}$ =0)과 준 원추형(.DELTA.p$_{o}$ /2) 그리고 원추형(.DELTA.p$_{o}$ =p$_{o}$ )의 세 가지 경우이다. 본 연구에서 고려한 입사광의 단락된 정도가 작을 수록 bump에 맺는 중심 회절상의 반경이 작게 나타났으며 이때 재생 신호의 극대치는 입사광의 단락된 정도가 작을수록 bump에 맺는 중심 회절상의 반경이 작계 나타났으며 이때 재생 신호의 극대치는 입사광의 단락된 정도가 큰 경우보다 크게 나타났고 bump의 크기도 작게 나타났다. 이러한 결과들로부터 입사광의 단락된 정도가 작을수록 광학 디스크로부터 큰 재생 신호를 얻을 수 있으며 cross-talk가 줄어듬을 알 수 있었다. 그러므로 실제 광학 디스크에 가능한 단락된 정도가 작은 가우스 진폭을 갖는 레이저 광을 입사광으로 사용하면 유용하리라 생각된다.

• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.224-229
• /
• 2006

There has been studied flow to minimize the spot size to increase data capacity. Optical data storage devices are being developed near practical limits with wavelength and NA of 405nm and 0.85. There has been studied many types of next generation storage devices such as blu-ray multilayer system, probe based data storage and holographic data storage. Among these data storage devices, solid immersion lens(SIL) based near field recording (NFR) has been widely studied. In this system, SIL is the key component that focuses the laser beam with a very small size which enables ultra high data capacity. Therefore, optical performance evaluation system is required for SIL assembly. In this dissertation, a simple and accurate SIL assembly measurement method is proposed with wedge plate lateral shearing interferometer(LSI). Wedge plate LSI is cheaper than commercialized interferometer, robust to the vibration and the moving distance for phase shifting is large that is order of micrometer. We designed the thickness, wedge angle, material, surface quality and wavelength of wedge plate as 1mm, 0.02degree, fused silica, lamda/10(10-5) and 405nm, respectively. Also, we confirmed simulation and experimental results with quantitative analysis. This simple wedge plate LSI can be applied to different types of SIL such as solid immersion mirror(SIM), hemispherical, super-hemispherical and elliptical SIL.