• Composites Research
• /
• 제25권6호
• /
• pp.230-235
• /
• 2012

본 연구에서는 항공기용 카메라구조의 진동특성 파악하고 최적조건을 선정하여 구조의 경량화 설계 방안을 제시하였다. 다물체 동력학 프로그램인 ADAMS를 이용하여 모드해석을 진행하고, 해석 결과를 가지고 직교법을 이용하여 항공기용 카메라 구조의 경량화 및 최적조건을 선정하여 이전의 항공기용 카메라 구조와 모드해석 결과를 서로 비교하였다. 또한, 기존에 제시 되어진 베어링의 차원의 값을 무차원의 값으로 전환하여 보다 효과적인 베어링의 기준을 선정하였으며, 비교된 결과를 토대로 최적화된 항공기용 카메라 구조가 제안되었다.

• 한국식품영양과학회지
• /
• 제28권6호
• /
• pp.1275-1282
• /
• 1999

To investigate the effect of flour brew with bifidobacteria on bread characteristics, flour brew with bifidobacteria was added to baking after 16 hour incubation at 37oC. The more addition of flour brew, the higher gassing power, the better machinality of dough were obtained, resulting in the larger specific volume of bread. Flavor profile analyzed by Electronic Nose System showed that flavor components of 30% flour brew were decreased comparing with those of control and there was shown definite difference in sensory characteristics between them. Staling studies of bread containing flour brew indicated had a definite effect in retarding the staling rate of bread, with time constant calculated in 30% treatment being 3.09 days and in control being 2.08 days. The enthalphy of gelatinization was decreased from 2.51J/g to 0.61J/g with increment of flour brew, suggesting that starch crystallization is delayed. conclusion, Flour brew fermented by bifidobacteria can be used as a natural bread improver with so many benefits as better machinality, one more day storage period, slower staling rate, better bread volume and more appealing bread flavor.

• 한국경영과학회지
• /
• 제25권2호
• /
• pp.67-76
• /
• 2000

We consider the determinant of the most economical target value through the sampling inspection by two consecutive machines. The machine sequence is fixed as products have to be processed by machine 1 first and then by machine 2 next, In this paper we assume that if quality of a unit is lower than inspection lower specification limited then the goods is not accepted, otherwise it is accepted. And we assume that the quality characteristics is larger-the-better characteristics and its distribution is the normal distribution whose standard deviation is known. This paper ends up with an numerical example by using the total expected profit function model that consider the scales profits inspection costs and material costs. And we analyze the variation of the total expected profit by changing coefficients of the functions.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1256-1261
• /
• 2003

Since the viscous effect increases as the size of device decreases, viscous-driven micropump is a promising mechanism in microscale applications. In the present study, a dual-rotor type pump which contains two counter-rotating cylinders for improving performance characteristics is proposed. First, for flows in the single-rotor type pump, the present unstructured grid simulation method is validated by comparing its results to the previous results. Next, the performance of the dual-rotor type pump is evaluated by the parametric studies and is compared to that of the previous single-rotor type pump. The flow characteristics are qualitatively similar to those of single-rotor type pump. However, the performance of the micropump with tandem rotors is still better than that of previous pumping type, e.g. much larger flow rate, smaller driving region, higher efficiency, and wider operation range.

• Structural Engineering and Mechanics
• /
• 제12권2호
• /
• pp.135-156
• /
• 2001

Analytical solutions and finite element results of laminated composite plates with smart material layers embedded in them are presented in this study. The third-order plate theory of Reddy is used to study vibration suppression characteristics. The analytical solution for simply supported boundary conditions is based on the Navier solution procedure. The velocity feedback control is used. Parametric effects of the position of the smart material layers, material properties, and control parameters on the suppression time are investigated. It has been found that (a) the minimum vibration suppression time is achieved by placing the smart material layers farthest from the neutral axis, (b) using thinner smart material layers have better vibration attenuation characteristics, and, (c) the vibration suppression time is larger for a lower value of the feedback control coefficient.

• 한국연소학회지
• /
• 제15권1호
• /
• pp.30-37
• /
• 2010

Carbonization characteristics of Indonesian bamboos were investigated using lab-scale tube furnace, in order to find optimum design temperature of a carbonizer for producing bamboo charcoal and vinegar. The bamboo samples used in this study are local bamboos from Damyang in Korea, Andong and Petung in Indonesia. Correlation of electric resistance, specific surface area and pH of bamboo vinegar with pyrolysis temperature has been investigated. Electric resistance of the charcoal increased for higher pyrolysis temperature the specific surface area was also increased as carbonization temperature got higher. Charcoal which has specific surface area of over $300\;m^2/g$ could be produced at $700^{\circ}C$. pH of bamboo vinegar was decreased for highter carbonization temperature and vinegar under pH 3 could be produced for all bamboo samples. In this experimental condition, it was found that lower carbonization temperature is better for producing bamboo vinegar of high quality, while higher temperature is better for obtaining bamboo charcoal with larger surface.

• 상하수도학회지
• /
• 제18권4호
• /
• pp.493-499
• /
• 2004

Rejection characteristics of heavy metals by nanofiltration membranes were investigated. Nanofiltration membranes rejected heavy metals much better than chloride, sulfate and TOC, of which concentration in synthetic wastewater was higher than that of heavy metals. To consider rejection characteristics of various metals by nanofiltration membranes, separation coefficient, which is the ratio of the metal permeation rate to the chloride ion or TOC permeation rate, was introduced. In spite of different materials and different nominal salt rejection of nanofiltration membrane used, the separation coefficients of metals were nearly the same. In particular, the separation coefficient of arsenic against chloride ion and TOC was larger than any other separation coefficient of heavy metals. These phenomena were observed in the relationship between the molar conductivity and the separation coefficient for heavy metals.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.171-178
• /
• 2001

In order to elucidate the lubricating mechanism of polyolester base oils [POEs], the wear characteristics of 27 kinds of polyolester base oils including mixed POEs were investigated. Their wear results were discussed in terms of the effect of molecular structure on wear performance and compared with those of mineral oil. In addition, the adsorption ability of POEs to reduced iron and their hydrolysis rates were measured and the effect of their molecular structures on the adsorptivity and hydrolysis rate of POEs was discussed, respectively. Finally, the lubricating mechanism anlyzed from these results of wear characteristics, adsorptivity and hydrolysis rate was proposed. That is to say, POEs are firstly adsorbed to friction surface and decomposed by hydrolysis or thermal degradation. Fatty acids obtained by degradation of POEs form adsorption film on friction surface. The larger become cohesive ability among fatty acid molecules in the adsorption film, the better gets the wear performance of POEs.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.113-124
• /
• 2000

First, in order to improve selecting method of quality characteristic level desired by customers, S/N(Signal-to-Noise) ratio of Taguchi in larger-the-better characteristics was applied. Second, the Matrix classification standard of ACE(Attribute Categorization Evaluation) is presented using KANO model on difference analysis of importance and satisfaction through questionnaire from customers. This is for reflecting the diverse EC which customers want in EC quality sufficiently. Also, establishing sales point will be helpful in business strategy through presenting types that are able to decide planning quality. Third, the important measure of EC about correlation among quality characteristics and a new weight of EC are calculated depending on importance of EC and the weight of customer attribute and materials of relationship matrix through correlation matrix analysis.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.481-490
• /
• 2000

First, in order to improve selecting method of quality characteristic level desired by customers, S/H(Signal-to-Noise) ratio of Taguchi in larger-the-better characteristics was applied. Second, the Matrix classification standard of ACE(Attribute Categorization Evaluation) is presented using KANO model on difference analysis of importance and satisfaction through questionnaire from customers. This is for reflecting the diverse EC which customers want in EC quality sufficiently. Also, establishing sales point will be helpful in business strategy through presenting types that are able to decide planning quality. Third, the important measure of EC about correlation among quality characteristics and a new weight o( EC are calculated depending on importance of EC and the weight of customer attribute and materials of relationship matrix through correlation matrix analysis.