• 한국구조물진단유지관리공학회 논문집
• /
• 제4권1호
• /
• pp.101-110
• /
• 2000

In case heavy rainfall is a key factor of slope failure, the failure zone is usually developed within the depth of 3~5m from the ground surface regardless of the location of the watertable. If rainfall is taken into consideration, it is general that the slope stability analysis is carried out under the assumption that the cut slope is saturated to the slope surface or the watertable elevates to a certain height so that ${\gamma}_{sat}$, the unit weight of saturated soil, is used. However, the analysis method mentioned above can't exactly simulate the variation of pore water pressure in the slope and yields different failure shape. The applicability of slope stability analysis method considering the distribution of pore water pressure within the slope with heavy rainfalls, was checked out after the stability analysis of a lage-scale cut slope in a highway construction site, where surface failure occurred with heavy rainfalls. An appropriate slope stabilization method is proposed on the base of the outcome of the analysis.

• 한국군사과학기술학회지
• /
• 제23권5호
• /
• pp.502-515
• /
• 2020

To identify the dynamic characteristics of the Auto-leveling system applied to the Tractor-Trailer type Transporter for mounting a large scale precision equipment, Dynamics Modeling & Simulation were performed using general Dynamics Analysis Program - RecurDyn(V9R2). The axial load data, transverse load data and pad trace data of leveling actuators were obtained from M&S. And they were analyzed and compared with each other by parameters, i.e. friction coefficients on the ground, landing ram speed of actuators, and direction & quantity of ground slope. It was observed that ground contact friction coefficients affected to transverse load and pad trace; the landing ram speed of actuators to both amplitude of axial & transverse load, and this phenomena was able to explain from the frequency analysis of the axial load data; the direction of ground slope to driving sequence of landing ram of actuators. But the dynamic behaviors on the two-directional slope were very different from them on the one-directional slope and more complex.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1294-1301
• /
• 2010

This study is an experimental research for the dispersion behavior and impact characteristics of debris flow according to change of slope. Large scale experimental setup for the debris flow was established to simulate the artificial rainfall and control the ground slope. Parameters such as materials of debris flow, slope, and length of slope were used for the experiments. After the experiments, it was found that the speed of ground material components was increased about 28~47%. It was found that speed can be increased by increasing the particle size. Furthermore, maximum/final loads for ground material components were increased 89% for the coarse aggregate and 68% for the fine aggregate comparing with sand.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1171-1182
• /
• 2009

The purpose of this case study is stability security in Talus and Coal Shale. The failure possibility of Talus area is high because of ground loss. The Coal Shale area is very week and large scale sliding possibility is high.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.215-218
• /
• 2005

This study was carried out to find problems of the farmland according to the large scale land consolidation projects. Field ramp have problems such as steep slope, narrow width and the difficulty of entering into field and exiting from it. In case of the even ratio of the paddy plot, It showed that the difference of the maximum average level were 8.4cm for the general plots($0.3{\sim}0.4ha$), 12.6cm for the large scale plots($0.8{\sim}1.0ha$), and the level of outlet part was higher than the level of inlet part in some plots. Also, most of presently using inlets are closed and opened manually. It showed that farmers had difficult in the operating of the inlets or the outlets. So it is required the development of the suitable inlets and the suitable outlets.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.946-956
• /
• 2008

Acoustic emission(AE) is low-energy seismic event associated with a sudden inelastic deformation such as the sudden movement of existing fractures, the generation of new fractures or the propagation of fractures. These events rapidly increase before major failure and happen within a given rock volume and radiate detectable seismic waves. Rock slopes are usually large in scale and there are many discontinuities in rock mass. AE waves are strongly attenuated when they propagate through joints. Thus we should resolve the attenuation problem to monitor large volume. In this study, we developed waveguide which is composed of two different materials, cement mortar and stainless steel rod. And several laboratory tests on developed waveguide are performed to obtain generalized AE parameters to predict the failure stage in rock slope. Comparing field data with experimental data in laboratory tests, failure stage of rock slope can be evaluated. To verify and optimize the developed monitoring method, we are now carrying out the field application at a rock slope.

• 한국터널지하공간학회 논문집
• /
• 제11권1호
• /
• pp.1-9
• /
• 2009

절리암반에시 기존 터널에 근접하여 사면굴착시 터널의 거동은 절기와 굴착사면상태의 영향을 받는다. 본 논문에서는 기존터널에 근접하여 지반을 굴착시, 절리각도와 굴착사면 경사의 영향을 파악하기 위하여 2축 실대형 모형시험장치(3.1 m*3.1 m*0.50 m(폭*높이*길이))를 이용한 시험을 수행하였다. 절리암반은 콘크리트 블록을 사용하여 모사하였으며 터널은 1/10축척(직경 0.6 m)으로 제작하였다. 절리각도는 $0^{\circ}$부터 $90^{\circ}$까지 변경이 가능하며, 굴착사면 경사는 $30^{\circ}$에서부처 $90^{\circ}$까지 가능하도록 되어 있다. 실대형 시험을 통하여 절리각도와 사면경사에 따른 터널거동과 수평지중변위를 계측, 분석하였다. 분석결과 절기각도와 사면경사가 크면 클수록, 터널 내공변위와 터널 라이닝 모멘트가 커지는 경향이 있었으며 수평지중변위 또한 절리각도와 사면경사에 많은 영향을 받고 있어 향후 사면보강에 있어 효율적 방안제시를 위한 기초자료로 활용이 가능할 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.117-122
• /
• 2003

Every year in domestic slope failure caused by rainfall is happening frequently. Specially, causable failure accident by localized downpour accompanied when summer rainy season period and produces typhoon gets damage of large scale human life and property. Failure happened at slope of 121 places ranged whole country national highway by No.15 typhoon Rusa that strike whole country during 3 days from August 30, 2002. Slope failure that happen by typhoon are judged for major cause to effect of ground saturation and surface water by localized downpour. In this research, failure characteristic was analyzed to target 20 places attaining site investigation among failure slope. As a result, erosions by surface water was construed for major cause of failure and judged for direct relation in failure slope weathering and topography Also, result that analyze inclination of failure part, in the case of ripping rock, inclination of failure side is forming Incline of the lowest 40$^{\circ}$, because surface failure of depth 4m on or so scale happened, it is require that regulating plan gently design standard inclination of weathered rock and soil layer And it is considered that desirable preparation of design standard about measure that help smooth drainage of surface water and can restrain percolation in ground to reduce failure damage by rainfall.

• 한국지리정보학회지
• /
• 제8권3호
• /
• pp.121-128
• /
• 2005

산불은 지형인자 중 경사에 의하여 대형화되는 경향이 강하다. 이러한 경사는 보통 GIS를 이용하여 분석하게 되는데 어떠한 분석 방법을 사용하는가에 따라 결과가 다르게 나타난다. 따라서 산불확대위험 분석에 합당한 경사 분석 방법을 선택하는 것이 중요하다. 본 연구에서는 셀기반 모델링을 이용하여 기존에 DEM 자료를 이용하여 경사를 계산하는 방법들을 검토하고, 산불확대위험 분석에 적합한 경사계산 알고리즘을 개발하고자 하였다. 그 결과 산불이 상향사면을 따라 급속하게 번지는 특성을 이용하여 산불확대위험 분석에 가장 적합한 경사계산 알고리즘으로 maximum uphill slope 알고리즘을 개발하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.285-292
• /
• 2004

Earth Anchor method as a supporting system is widely used in the large scale deep excavation of urban areas or slope excavation project. Considering the application frequency of that method and catastrophe of that method under unproper construction management, we can find out many problems relevant to the domestic design and construction management of earth anchor method. When we encounter the cases of rapid increments and various decrements in earth anchor axial forces, considering the characteristic of earth anchor method, it is an essential point to catch the reasons and to prepare countermeasures. This article introduces two actual monitoring examples based on the close analyses of measured data in a typical large scale deep excavation project and slope excavation project. One is a rapidly increasing case of earth anchor axial forces with the continuous advance of incremental deformation in a geological layer interface. And another is a decreasing case of earth anchor axial forces with the construction conditions. The effort of this article aims to improve and develop the technique of design and construction in the coming projects having similar ground condition and supporting method.