• 비파괴검사학회지
• /
• 제33권5호
• /
• pp.443-451
• /
• 2013

음향방출기법은 구조물에 존재하는 손상 및 손상 메커니즘을 규명하는 가장 유효한 비파괴검사 수단으로 널리 이용되고 있다. 최근 이러한 재료 및 구조의 내부 손상의 실시간 모니터링이 가능한 기법을 활용하여 풍력 블레이드와 같은 대형 구조물의 건전성을 실시간으로 감시 가능하도록 하는 연구가 각광 받고 있다. 이 논문에서는 선행 연구를 통하여 개발된 신호 맵핑 기법을 사용하여 750 kW 블레이드에 외부 손상을 가정한 임의의 외부 충격을 가하여 위치 탐지 결과의 정확성을 확인하고, 100 kW 블레이드의 정하중 시험 시 발생하는 음향방출신호를 측정하여 손상이 발생된 것으로 의심되는 지역을 탐지하는 실험을 실시하였다. 실험 결과 발생된 모든 외부 충격신호에 대하여 낮은 오차범위를 가지는 결과를 보였으며, 정적하중실험동안 측정된 음향방출신호와 실제 손상 발생 위치의 비교를 통하여 새로운 신호 맵핑 기법으로 블레이드에서 발생되는 내부 손상을 매우 높은 정확도로 위치 표정이 가능함을 확인하였다.

• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.76-82
• /
• 2015

A hybrid fiber-optic sensor system which combines fiber Bragg grating sensors and a Michelson interferometer has been constructed and evaluated for condition monitoring of large scale wind turbines. In order to measure multiple stresses applied to wind turbines such as strain, temperature and vibration, the system uses single broadband light source. It addresses both types of sensors, which simplifies the optical setup and enhances the cost-effectiveness of condition monitoring system. An athermal-packaged FBG is used to supply quasi-coherent light, of which coherence length is about 3.28mm, for the Michelson interferometer demodulation. Experimental results demonstrated that the proposed fiber-optic sensor system was capable of measuring strain and temperature with measurement accuracy of 1pm. Also 500~2000Hz vibration signals were successfully analyzed by applying FFT signal processing to interference signals.

• 설비공학논문집
• /
• 제21권7호
• /
• pp.409-416
• /
• 2009

On 21st century, global warming is the most serious environmental problem threatening the existence of lives on the earth. One of the serious reasons of this nature phenomena was due to the greenhouse effect by carbon dioxide mainly produced with the combustion process of hydro-carbon fuel. and it is mostly produced. In the high oil prices age, intensification of energy efficiency promotion in the building sector is required. Windows are dominating large percentage whole building loads, and are regarding as the primary target of energy efficiency. The purpose of this research is on the obtaining of the renewable energy source in the skyscrape buildings in the metropolitan area. The air movement is happens due to the atmospheric pressure differences in the air. Due to this simple physical theory, it is easily expected to obtain the useful renewable nature energy through the high -raised vertical air stack installed in a tall building. However, there is one problem that should be resolved which is called air-hole effect in the sky -scrape buildings.

• 풍력에너지저널
• /
• 제15권1호
• /
• pp.43-49
• /
• 2024

This study performed a response analysis according to the transmission error of the yaw drive. To perform the response analysis, the excitation source of the transmission error was modeled and the outer ring of the first stage bearing and the outer ring of the output shaft bearing were used as measurement positions. The response results were analyzed based on the vibration tolerance values of AGMA 6000-B96. As a result of the response of the first stage bearing outer ring, the maximum displacement of the first stage planetary gear system was 5.59 and the maximum displacement of the second to fourth stage planetary gear systems was 4.21 ㎛ , 3.13 ㎛ , and 25.6 ㎛ . In the case of the output shaft bearing outer ring, the maximum displacement of the first stage planetary gear system was 1.73 ㎛, and the maximum displacement of the second to fourth stage planetary gear system was 1.94 ㎛, 0.73 ㎛, and 2.03 ㎛. According to AGMA 6000-B96, the vibration tolerance of first stage is 17.5 ㎛, and the vibration tolerance of the second to fourth stages is 58 ㎛, 80 ㎛, and 375 ㎛, which shows that the vibration tolerance is satisfied and it is safe.

• 한국태양에너지학회 논문집
• /
• 제36권1호
• /
• pp.27-37
• /
• 2016

A simple but practical Ensemble Prediction System(EPS) for wind power forecasting was developed and evaluated using the measurement of the offshore meteorological tower, HeMOSU-1(Herald of Meteorological and Oceanographic Special Unite-1) installed at the Southwest Offshore in South Korea. The EPS developed by the Korea Institute of Energy Research is based on a simple ensemble mean of two Numerical Weather Prediction(NWP) models, WRF-NMM and WRF-ARW. In addition, the Kalman Filter is applied for real-time quality improvement of wind ensembles. All forecasts with EPS were analyzed in comparison with the HeMOSU-1 measurements at 97 m above sea level during Typhoon Bolaven episode in August 2012. The results indicate that EPS was in the best agreement with the in-situ measurement regarding (peak) wind speed and cut-out speed incidence. The RMSE of wind speed was 1.44 m/s while the incidence time lag of cut-out wind speed was 0 hour, which means that the EPS properly predicted a development and its movement. The duration of cut-out wind speed period by the EPS was also acceptable. This study is anticipated to provide a useful quantitative guide and information for a large-scale offshore wind farm operation in the decision making of wind turbine control especially during a typhoon episode.

• 한국환경과학회지
• /
• 제18권8호
• /
• pp.911-918
• /
• 2009

Electromagnetic interference (EMI) is defined as the interaction phenomena of electromagnetic waves scattered from a large structure or complex terrain. In this study, the propagation of linear wave is modeled with ray theory, direct simulation Monte Carlo (DSMC), and some classical theories on flat plates. The wave physics of reflection, refraction, and diffraction are simulated for the investigation of front and back scattering of the one-dimensional plane wave from a tower with ray theory and DSMC, respectively. The effect of rotating disk idealized from the real wind-turbine blades is modeled with a simplified version of the classical electromagnetic theory as well as DSMC based on the ray theory.

• 한국유체기계학회 논문집
• /
• 제2권4호
• /
• pp.48-56
• /
• 1999

For the study on loss coefficients of turbine cascade with variation of incidence angle, the wind-tunnel tests were performed under the ranges in velocity of 10 m/s, 15 m/s, 20 m/s and incidence angles from $-20^{\circ}\;to\;20^{\circ}$ by intervals of $5^{\circ}$. Comparing our results with Soderberg's prediction, differences in loss coefficient were $2.5\%\;and\;2.8\%$ each for 10 m/s and 15 m/s. A large disagreement of $30.3\%$ was showed at 20 m/s freestream velocity. The comparisons of these test results with Ainley's prediction showed an $8\%$ difference in the case of 20 m/s freestream velocity. Test results were approximately comparable with Ainley's loss prediction's in incidence angles. Generally, averaged total pressure loss seemed to be decreased as Reynolds number increased. The total pressure loss coefficients were increased parabolically, as incidence angles were increased negatively and positively from $0^{\circ}$, in all speed ranges. At the far low freestream velocities, minimum loss accurred between $-5^{\circ}\;and\;+5^{\circ}$. But this minimum range narrowed the location of this range by shifting to the direction of the angle as freestream velocity was increased.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.784-795
• /
• 1995

This paper represents the results of the experiments of the three-dimensional flow and the aerodynamic loss caused by the three-dimensional flow within the plane bucket blades. To research the secondary flow and the aerodynamic loss, the large-scale plane bucket blade of lst-stage in the low pressure steam turbine is made of FRP. The detailed investigation of the secondary flow and the aerodynamic loss using 5-hole pressure probe within turbine cascade has been carried out in the low speed wind tunnel. The limiting streamlines of the suction and endwall surface have been visualized by the oil film method. The flow visualization of the secondary flow has been performed by the laser light sheet technique and image processing system. By using the method mentioned above, it is possible to observe the evolution of the pitchwise mass-averaged flow deviation angle and total pressure loss coefficient, the secondary flow, and the aerodynamic loss through the cascade.

• 한국해안·해양공학회논문집
• /
• 제27권1호
• /
• pp.1-8
• /
• 2015

우리나라 남서해안은 풍력발전에 최적지로 평가받고 있으며 최근 해상풍력 구조물을 포함하는 해안구조물의 건설이 증가하고 있다. 그러나 우리나라 남서해안의 조차는 3~8 m까지 발생하여 남서해안에 설치되는 풍력기초들은 횡방향력과 조류의 다방향 흐름에 의한 세굴로 전체 구조물에 예상치 못한 진동에 의한 불안정성이 야기될 수 있다. 이 연구에서는 회전식 수리저항성능 실험기를 이용하여 인공지반시료의 수리저항성능을 평가하였으며 전기비저항 측정결과와 비교하여 수리저항성능과 전기비저항 특성과의 상관관계에 대한 연구를 진행하였다. 실험결과 일방향 한계전단응력과 양방향 한계전단응력을 상한계와 하한계로 표시하고 전기비저항 특성과 상관관계를 도시하면 조립토와 세립토가 비교적 명확히 구분되고 한계전단응력과의 상관관계 도출이 가능한 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제36권2호
• /
• pp.29-42
• /
• 2020

본 연구에서는 모래지반에 설치된 해상풍력 지지용 직경 7m 모노파일의 p-y 곡선에 대한 수평하중-모멘트 조합의 영향을 분석하기 위하여 원심모형실험을 수행하였다. 이를 위하여 원심모형실험시스템을 구축하였고, 다수의 게이지를 부착한 계측용 모노파일 모형을 사용하여 68.83g에서 원심모형실험을 수행하였다. 지표면으로부터 직경의 1배와 직경의 5배 높이에서 하중재하를 하는 2개의 수평하중-모멘트 조합으로 재하시험이 수행되었다. 모형지반은 중간밀도의 모래로 조성되었다. 원심모형실험결과로부터 실험 p-y 곡선을 산정하였고 기존 문헌의 p-y 곡선과 비교하였다. 결과적으로 p-y 곡선에 대한 모멘트 조합의 영향이 미미함을 확인하였다. 또한, 근입깊이가 모노파일의 p-y 곡선에 영향을 미치는 것을 확인하였다