• 콘크리트학회지
• /
• 제8권2호
• /
• pp.139-150
• /
• 1996

본 연구의 목적은 프리캐스트 콘크리트(PC) 대형판 구조물의 축소모델 제작 및 실험기법에 관한 정보을 제공하는 것이다. 적용된 축소율은 1/5이며, 4가지의 실험이 수행되었다. : 모델 콘크리트와 모델 철근의 재료실험, 수평접합부의 압축실험, 수직접합부의 전단실험, 2층 부분구조물의 정적 주기 실험, 이들 실험결과를 기초로 다음의 결론을 도출하였다. : (1)모델 콘크리트는 일반적으로 예상보다 압축강도가 크게 나타났다. (2)모델 철근은 진공관을 사용하지 않고 열처리를 할 경우 연성의 저하를 보인다. (3)수평접합부와 수직접합부의 파괴모드는 실물크기와 모델이 거의 유사하였으나. 모델의 강도는 상사법칙에 의한 요구강도보다 크게 나타났다. (4) 실물크기와 유사하게 모델철근의 연성과 모델 콘크리트의 압축강도를 확보할 수 있다면, 1/5모델 부분구조물의 이력거동은 실물크리와 매우 근접되게 나타낼 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.385-392
• /
• 2003

Traditional forms of river and coastal structures have become very expensive to build and maintain, because of the shortage of natural rock. Geotextile tubes hydraulically or mechanically filled with dredged materials have been applied in hydraulic and coastal engineering in recent years(shore protection structure, detached breakwater, groins and jetty). Recently, new preliminary design criteria supported by model and prototype tests, and some stability analysis calculations have been studied. In this study, the numerical analysis was performed to investigate the behavior of geotextile tube with various properties of geotextile and hydraulic pumping conditions. Numerical analysis was executed to compare with the results from the large-scale field model tests, and also compared the results of 2-D plane strain analysis and 3-D FEM analysis. A geotextile tube was modeled using the commercial finite element analysis program ABAQUS and the one-quarter of tube was modeled. Behavior of geotextile tube during the hydraulic pumping procedure was analyzed by comparing the large-scale field model test and numerical analysis. The shape variation and maximum tube height between the numerical analysis results and large-scale filed test results are turned out to be a good agreement.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.337-344
• /
• 2001

Some as-built drawings in national roadway bridges in Korea were examined. There are many bridge piers, whose aspect ratios are in the vicinity of 2.5. These columns are expected to do shear-flexure behaviour and have large scale effect between full and reduced scale model. In the study, full and 1/2 scale model tests on the shear-flexure behaviour columns were carried out. The seismic performance of existing bridge piers without seismic details were examined by Quasi Static Test

• 유통과학연구
• /
• 제11권12호
• /
• pp.5-11
• /
• 2013

Purpose - The purpose of this study was to construct a turnover estimation model by investigating research by Park et al. (2006) on the market area of domestic distribution. The study investigated distribution by using a new tool for the turnover estimation technique. This study developed and discussed the turnover estimation technique of Park et al. (2006), applying it to a large-scale retailer in "D"city that was suitable for on-the-spot distribution. It constructed the new model in accordance with test procedures keeping to this retail business location, to apply its procedures to a specific situation and improve the turn over estimation process. Further, it investigated the analysis and procedures of existing turnover estimation cases to provide problems and alternatives for turnover estimation for a large-scale retailer in "D"city. Finally, it also discussed problems and scope for further research. Research design, data, and methodology - This study was conducted on the basis of "virtue" studies. In other words, it took into account the special quality of the structure of Korea's trade zones. The researcher sought to verify a sale estimate model for use in a distribution industry's location. The main purpose was to enable the sale estimate model (that is, the individual model's presentation) to be practically used in real situations in Korea by supplementing processes and variables. Results - The sale estimate model is constructed, first, by conducting a data survey of the general trading area. Second, staying within the city's census of company operating areas, the city's total consumption expenditure is derived by applying the large-scale store index. Third, the probability of shopping is investigated. Fourth, the scale of sales is estimated using the process of singularity. The correct details need to be verified for the model construction and the new model will need to be a distinct sale estimate model, with this being a special quality for business conditions. This will need to be a subsequent research task. Conclusions - The study investigated, tested, and supplemented the turnover estimation model of Park et al. (2006) in a market area in South Korea. Supplementation of some procedures and variables could provide a turnover estimation model in South Korea that would be an independent model. The turnover estimation model is applied, first, by undertaking an investigation of the market area. Second, a census of the intercity market area is carried out to estimate the total consumption of the specific city. Consumption is estimated by applying indexes of large-scale retailers. Third, an investigation is undertaken on the probability of shopping. Fourth, the scale of turnover is estimated. Further studies should investigate each department as well as direct and indirect variables. The turnover estimation model should be tested to construct new models depending on the type of region and business. In-depth and careful discussion by researchers is also needed. An upgraded turnover estimation model could be developed for Korea's on-the-spot distribution.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.44-50
• /
• 2005

Since a cavitation pattern in model scale can be different from that in full scale, it has been highly demanded to measure a fluctuating pressure induced by propeller in full scale. For the verification of the cavitation test for 105K lanker in the large cavitation tunnel in Samsung Ship Model Basin(SSMB), an effective pressure fluctuation measurement system was developed and a series of full scale measurements was carried out. These results were compared with those of cavitation tests in SSMB. The measured results in full scale gave good agreements to those in model tests. The fluctuating pressure at $2^{nd}$ blade frequency in full scale seems to be highly dependent upon tip loading.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.203-210
• /
• 2002

The past bridge design specifications of Korea didn't include 1imitation on the amount of lap splices in the plastic hinge zone of piers, and so do current specifications. But these specifications include just limitation on the minimal length of lap splices. Thus, a large majority of non-seismically designed bridge piers may have lap splices in plastic hinge zone. In this study, model pier was selected among existent bridge piers whose failure mode is complex shear-flexure mode. Full scaled RC pier models whose aspect ratio is about 2.67 were constructed and quasi static test according to the drift level history was implemented. From the test results, effect of the lap splices on the seismic performance of bridges piers was analyzed, and the seismic capacity of the model bridges was evaluated by capacity spectrum method.

• Geomechanics and Engineering
• /
• 제31권4호
• /
• pp.423-437
• /
• 2022

The objective of the study is to evaluate the feasibility of the dynamic behavior of slope through both 1 g shaking table test and numerical analysis. Accelerometers were installed in the slope model with different types of seismic waves. The numerical analysis (ABAQUS and DEEPSOIL) was used to simulate 1 g shaking table test at infinite boundary. Similar Acceleration-time history, Spectral acceleration (SA) and Spectral acceleration amplification factor (Fa) were obtained, which verified the feasibility of modeling using ABAQUS and DEEPSOIL under the same size. The influence of the size (1, 2, 5, 10 and 20 times larger than that used in the 1 g shaking table test) of the model used in the numerical analysis were extensively investigated. According to the similitude law, ABAQUS was used to analyze the dynamic behavior of large-scale slope model. The 5% Damping Spectral acceleration (SA) and Spectral acceleration amplification factor (Fa) at the same proportional positions were compared. Based on the comparison of numerical analyses and 1 g shaking table tests, it was found that the 1 g shaking table test result can be utilized to predict the dynamic behavior of the real scale slope through numerical analysis.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.849-854
• /
• 2002

From the analysis results of some as-built drawings in national roadway bridges in Korea, many bridge piers are expected to show complex shear-flexural behaviour under earthquakes. But the previous research works about the seismic evaluation of bridges considered flexural behaviour RC piers only. In addition, the past bridge design specifications in Korea didn't include limitation on the amount of longitudinal lap splices in the plastic hinge zone of piers. Thus a large majority of non-seismically designed bridge piers in Korea may have lap splices in plastic hinge zone. In this study, prototype pier was selected among existent bridge piers whose failure mode is expected to be complex shear-flexural mode. And then, full scale and 1/2 reduced scale model RC piers with various longitudinal lap splice details were constructed. From the quasi static test results on these model RC piers, the effect of longitudinal lap splices on the seismic performance of bridges piers was analyzed. And the seismic capacity of the non-seismically designed shear-flexural RC piers was evaluated.

• Earthquakes and Structures
• /
• 제15권6호
• /
• pp.655-665
• /
• 2018

Shield tunnels are widely used throughout the world. However, their seismic performance has not been well studied. This paper focuses on the seismic response of a large scale model tunnel in compacted sand. A 9.3 m long, 3.7 m wide and 2.5 m high rigid box was filled with sand so as to simulate the sandy soil surrounding the tunnel. The setup was excited on a large-scale shake table. The model tunnel used was a 1:8 scaled model with a cross-sectional diameter of 900 mm. The effective shock absorbing layer (SAL) on the seismic response of the model tunnel was also investigated. The thickness of the tunnel lining is 60 mm. The earthquake motion recorded from the Kobe earthquake waves was used. The ground motions were scaled to have the same peak accelerations. A total of three peak accelerations were considered (i.e., 0.1 g, 0.2 g and 0.4 g). During the tests, the strain, acceleration and soil pressure on the surface of the tunnel were measured. In order to investigate the effect of shock absorbing layer on the dynamic response of the sand- tunnel system, two tunnel models were set up, one with and one without the shock absorbing layer of foam board were used. The results shows the longitudinal direction acceleration of the model tunnel with a shock absorbing layer were lower than those of model tunnel without the shock absorbing layer, Which indicates that the shock absorbing layer has a beneficial effect on the acceleration reduction. In addition, the shock absorbing layer has influence on the hoop strain and earth pressure of the model tunnel, this the effect of shock absorbing layer to the model tunnel will be discussed in the paper.

• Interaction and multiscale mechanics
• /
• 제2권3호
• /
• pp.235-261
• /
• 2009

This study illustrates the differences between the elasto-plastic cap model and Lade's model with Cosserat rotation through the analyses of two large-scale geosynthetic-reinforced soil (GRS) retaining wall tests that were brought to failure using a monotonically increasing surcharge pressure. The finite element analyses with Lade's model were able to reasonably simulate the large-scale plane strain laboratory tests. On average, the finite element analyses gave reasonably good agreement with the experimental results in terms of global performances and shear band occurrences. In contrast, the cap model was not able to simulate the development of shear banding in the tests. In both test simulations the cap model predicted failure loads that were substantially less than the measured ones.