• 소성∙가공
• /
• 제21권5호
• /
• pp.319-323
• /
• 2012

In order to predict the internal void closing behavior in open die forging process, multiple scale modeling has been developed and applied. The huge size difference between ingot and inner void makes it almost impossible to simultaneously model the actual loading conditions and the void shape. Multiple scale modeling is designed to integrate macro- and micro- models effectively and efficiently. The void closing behavior was simulated at 39 different locations in a large ingot during upsetting and cogging. The correlation between the closing behavior and variables such as effective plastic strain and maximum compressive strain was studied in order to find an efficient measure for predicting the soundness of the forging.

• Korean Chemical Engineering Research
• /
• 제54권6호
• /
• pp.775-780
• /
• 2016

최근 태양전지 산업에서는 효율과 더불어서 생산성을 높이고 원가를 절감할 수 있는 설계가 요구되고 있다. 생산성의 향상을 위하여 반응기의 크기를 키우면 기존의 8 inch 잉곳에서 12 inch 잉곳으로 생산이 가능하다. 또한 연속공정법을 사용하여 생산성 증대를 극대화 시킬 수 있다. 본 연구에서는 12인치 잉곳이 최적 컨디션의 수율향상을 위한 소비전력 감소와 생산성 향상에 관한 시뮬레이션을 진행하였다. 인출속도 별 계면 형상과 폰-미제스 스트레스, 온도구배, 소비전력을 비교하여 최적의 인출속도를 찾았다. 그 결과, 생산성 향상과 에너지를 절감할 수 있는 최적 공정 파라미터를 도출할 수 있었다. 이러한 연구는 실제 태양전지 산업에서 생산성 향상에 기여할 수 있을 것으로 기대 된다.

• 한국결정성장학회지
• /
• 제13권4호
• /
• pp.182-186
• /
• 2003

태양전지의 제조가격의 저가화를 위한 노력이 다각적으로 진행되고 있다. 이중에 하나가 규소 잉곳의 대형화이다. 가로 세로 69cm무게 240kg의 초대형 규소 잉곳을 자동화된 결정성장로를 이용하여 제조하였다. 이 방법은 규소 용체의 열을 하부 흑연 기판을 아래로 이동하면서 축출함으로써 방향성 응고를 유도하고 있다. 이 방법으로 제조된 규소 잉곳을 평가하여 본 결과 전기적, 구조적으로 매우 균일하고 태양전지의 제조에 적합한 것으로 판명되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.25-34
• /
• 1995

Large-scale low-alloy steel shafts, used in the manufacture of steam turbine, are produced by ingot making, forging and heat treatemtn processes. The numerical analysis techniques are introduced to analyze and design the working conditions in each process. The solidification of a steel ingot is studied through the finite element method. The open die press forging and quenching process are simulated by viscoplastic and elastic-plastic finite element method, respectively. Thus numerical analysis techniques are very useful tools to study favorable working conditions for better and more desirable product quality.

• 동력기계공학회지
• /
• 제20권6호
• /
• pp.40-45
• /
• 2016

The manufacturing process of large scaled Al 7050 alloy is difficult for the occurrence of solidification crack during casting. The aims of this study are the evaluations of microstructure and mechanical properties of extruded Al 7050 billet and ring forged one with large scale. Large scaled Al 7050 billet was casted by direct-chill casting process. The extruded and ring forged specimens were prepared from the casted ingot after residual stress relief and homogenization heat treatment, respectively. Microstructures, hardness and tensile test of the surface, middle and center part of each specimen were performed at room temperature. Sheared and elongated type grains were observed at the edge parts of surface and center area and its aspect ratios of grains were low and similar as 0.21 while that of middle area was closed to 0.92 value in ring forged Al 7050 alloy. The mechanical properties of extruded Al 7050 alloy were superior than those of ring forged one. The hardness values of surface and center part were slightly higher than that of middle part in ring forged Al 7050 alloy.

• 소성∙가공
• /
• 제6권3호
• /
• pp.203-212
• /
• 1997

In this research, to obtain the optimal die width of CV die(conventional die), which replaces FM die in free forging of large scale rotor using the flat die, the model material experiments and theoretical analysis using three dimensional FEM are performed. The FM die, which was designed to remove Mannesmann's effect at the central part of the ingot, has very bad workabiltity in real field, therefore on the empirical base they use the CV die of wide width in actual working field. In this study, the excellency of CV die is proved quantitively, and the optimal die width of CV die is determined through the model material experiments and theoretical analysis using FEM in the point of effective strain, stresses, and load.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.53-54
• /
• 2018

U/RE was electrochemically recovered to LCC at $50mA/cm^2$ from LiCl-KCl salt containing $0.5wt%UCl_3$, $0.22wt%NdCl_3$, 0.15wt%$CeCl_3$ and $0.07wt%LaCl_3$. The Cd in the LCC deposit was removed during the distillation using Cd distiller. U/RE product of 107g obtained from the distiller was installed to TG and then heated to $1200^{\circ}C$ to be consolidated. Dense U/RE metal ingot was not acquired through the consolidation process because U/RE product had been partially already oxidized during the distillation process.