• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.97-100
• /
• 2004

In-place curing box for specimens is used to cure the compressive strength specimens for control in place concrete. The box if composed of insulating chamber maintaining 20$\pm$3$^{\circ}C$ of temperature, in this paper, strength and temperature history of specimens cured at in plate curing box are investigated to verify field applicability. According to test results, air temperature at measured time shows large temperature variation and below zero, whereas, inside temperature of in place curing box maintains within 20$\pm$3$^{\circ}C$ due to temperature control function. For curing condition. temperature of specimens cured at outside shows large temperature deviation. specimens lured at in-place curing box is not affected by outer temperature.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.310-311
• /
• 2002

We designed a large bore superconducting solenoid as a source of magnetic field inside liquid-nitrogen-jacketed liquid helium dewar. The diameter of the sample space in the dewar is about 10.0 cm. Considering the space for thermal insulation between liquid helium and the sample tube, the solenoid bobbin has been designed to be 12.0 cm and the most inner layer of the solenoid 13.0 cm. The desired uniformity of the field, which is ~ $\pm$0.1％ of the central field amplitude deviation within ~5.0$^2$$\times$3.6 ㎤ with the shortest dimension along the solenoidal axis, restricted the length of the solenoid to be at least 41.14 cm.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1177-1180
• /
• 2003

Thallium is quantitatively retained by 1,10-phenanthroline and tetraphenylborate onto benzophenone in the pH range 0-11 from a large volumes of aqueous solutions of various samples. After filtration, the solid mass consisting of thallium complex and benzophenone is dissolved with 5 mL of dimethylformamide and the metal was determined by flame atomic absorption spectrometric. About 0.4 ㎍ of thallium can be concentrated from 400 mL of aqueous sample, where its concentration is as low as 1.0 ng/mL. Eight replicate determinations of 8.0 ㎍/mL of thallium in final dimethylformamide solution gave a mean absorbance of 0.160 with a relative standard deviation of 1.7%. The sensitivity for 1% absorption was 0.22 ㎍/mL. The interference of a large number of anions and cations has been studied and the optimized conditions developed were utilized for the trace determination of thallium in various alloys and biological samples.

• Phonetics and Speech Sciences
• /
• v.5 no.1
• /
• pp.73-80
• /
• 2013

Formant is one of the essential vocal features for research of voice production, recognition and synthesis. Numerous studies were established on foreign languages including English vowels. However, studies related to Korean were done with a limited number of voice data. In this study, we compare four formants according to age and gender using a large number of Korean monophthongs. A total of 2614 Korean speakers participated in our experiments. We summarize statistical results by mean and standard deviation for each formant of five monophthongs. The results show a notable difference in each age and gender group. A quantitative study based on a large dataset is suggested for future studies on Korean speech sounds.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.488-492
• /
• 2013

Current limiting diode (CLD) was fabricated using junction field effect transistor (JFET) structured two small cells and eight large cells. Two small cells and eight large cells were connected in parallel and the obtained constant current was 110 mA. The application of CLD in each of the parallel circuits on chip on board (COB) type LED lighting source, could significantly reduce the current deviation within the parallel circuits. The applications of CLD on AC power small lighting source, battery power low voltage parallel lighting source and AC flat lighting source were investigated.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.7
• /
• pp.85-92
• /
• 2016

The law of large numbers, central limit theorem, and connection among binomial distribution, normal distribution, and statistical estimation require dynamics of continuous visualization for students' better understanding of the concepts. During this visualization process, the differences and similarities between statistical probability and mathematical probability that students should observe need to be provided with the intermediate steps in the converging process. We propose a visualization method that can integrate intermediate processes and results through Excel. In this process, students' experiences with dynamic visualization help them to perceive that the results are continuously changed and extracted from multiple situations. Considering modeling as a key process, we developed a classroom exercise using Excel to estimate the population mean and standard deviation by using a sample mean computed from a collection of data out of the population through sampling.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.433-438
• /
• 1995

The most popular minimization method is based on the least-squares criterion, which uses the $L_2$ norm to quantify the misfit between observed and synthetic data. The solution of the least-squares problem is the maximum likelihood point of a probability density containing data with Gaussian uncertainties. The distribution of errors in the geophysical data is, however, seldom Gaussian. Using the $L_2$ norm, large and sparsely distributed errors adversely affect the solution, and the estimated model parameters may even be completely unphysical. On the other hand, the least-absolute-deviation optimization, which is based on the $L_1$ norm, has much more robust statistical properties in the presence of noise. The solution of the $L_1$ problem is the maximum likelihood point of a probability density containing data with longer-tailed errors than the Gaussian distribution. Thus, the $L_1$ norm gives more reliable estimates when a small number of large errors contaminate the data. The effect of outliers is further reduced by M-fitting method with Cauchy error criterion, which can be performed by iteratively reweighted least-squares method.

• 한국데이터정보과학회:학술대회논문집
• /
• 2006.04a
• /
• pp.43-47
• /
• 2006

Consider a multitype queue where queued customers arc served in their order of arrival at a rate which depends on the customer type. Here we calculate the sharp asymptotics of the probability the total number of customers in the queue reaches a high level before emptying. The natural state space to describe this queue is a tree whose branches increase in length as the number of customers in the queue grows. Consequently it is difficult to prove a large deviation principle. Moreover, since service rates depend on the customer type the stationary distribution is not of product form so there is no simple expression for the stationary distribution. Instead, we use a change of measure technique which increases the arrival rate of customers and decreases the departure rate thus making large deviations common.

• Journal of the Korea Society for Simulation
• /
• v.13 no.3
• /
• pp.1-10
• /
• 2004

The cell loss probability required in the ATM network is in the range of 10$^{-9}$ ∼10$^{-12}$ . If Monte Carlo simulation is used to analyze the performance of the ATM node, an enormous amount of computer time is required. To obtain large speed-up factors, importance sampling may be used. Since the Markov-modulated processes have been used to model various high-speed network traffic sources, we consider discrete time single server queueing systems with Markov-modulated arrival processes which can be used to model an ATM node. We apply importance sampling based on the Large Deviation Theory for the performance evaluation of, MMBP/D/1/K, ∑MMBP/D/1/K, and two stage tandem queueing networks with Markov-modulated arrival processes and deterministic service times. The simulation results show that the buffer overflow probabilities obtained by the importance sampling are very close to those obtained by the Monte Carlo simulation and the computer time can be reduced drastically.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.241-248
• /
• 2006

By Testing tension coupon, deviation of yield strength & tensile strength of SS and SM is big but the that of SN is small relatively. So Designing weak beam type frame by using SN could be reflected well the original intention. As the strength ratios of beam and column becomes large, the absorption energy is large. The increase quantity was linear relationship, the y=0.46x+0.62 $(R^2=0.82)$