• 한국진공학회지
• /
• 제16권4호
• /
• pp.235-243
• /
• 2007

지금 국내에서는 토카막 핵융합실험장치, 대전류 중성입자빔 실험장치 및 우주 모의실험실 같은 거대시설의 건설과 운용이 활발하다. 이런 시설의 핵심설비인 대형 진공용기는 중소형 용기에 비해 누설 가능성은 높은 반면 기체누설을 검사하는 것은 까다롭다. 중소형 용기에서 널리 사용되는 헬륨누설검사 방법을 어떻게 효율적으로 이런 대형 용기에 적용할 수 있는가 알아보기 위해, 다양한 가상적인 누설검사 시스템들을 구성하고 압력분포 및 헬륨 분압을 계산하여 주어진 장치조건에서 적절한 검사 시스템을 찾는 방법에 대해 논한다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.126-126
• /
• 2007

• 한국추진공학회지
• /
• 제25권4호
• /
• pp.19-27
• /
• 2021

한국형발사체용 연소기 성능 고도화를 위한 핵심기술을 검증하기 위해 고압 축소형 연소기를 개발하였다. 성능 고도화를 위한 핵심기술은 고압 연소기용 분사기 설계, 적층제조기법을 적용한 연소안정화 장치 개발, 고압 축소형 연소기 헤드 및 재생냉각 연소실 설계/제작 등이다. 고압 축소형 연소기 개발을 통해 핵심기술을 검증하였고, 이 기술들은 향후 대형 액체로켓엔진 연소기 개발에 활용될 예정이다.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.49-56
• /
• 1999

The effects of the internal flow in a D.I. Diesel injection nozzle on the atomization of a spray were analyzed experimentally. Flow visualization studies were made using a transparent acrylic model nozzle as a diesel nozzle . Water instead of disel fuel was used as the injection liquid. The geometry of the model nozzle was scaled up 10 times of the actual nozzle and the injection pressure for the model nozzle was adjusted so as to achieve a Reynolds number at the discharge hole that was the same as the actual nozzle. Experimental results show that when the needle lift was small, the high turbulence in the sac chamber generated by the high velocity seat flow made the spread angle of the spray plume large. Cavitation, which arose from the sac chamber, makes the spread angle of the spray plume large but the discharge coefficient small.

• 한국환경과학회지
• /
• 제25권8호
• /
• pp.1191-1206
• /
• 2016

Transported deposit was accumulated in a grit chamber built at the mouth of Yeocheoncheon in 1987 with the intention of blocking the influx of sediment into the Ulsan-harbor. This study attempted to analyze the effects of the transported deposit on the water quality at Yeocheoncheon. Only one episode of dredging has been performed in the approximately 25 years since the grit chamber were built, leading to the formation of stagnant water in the grit chamber due to a large amount of transported deposit. The deposit has a relatively high organic content, in the range of 11.7-25.9% (mean 18.3%). It appears that the main reason for the upstream transport of water pollution from the mouth of the Yeocheoncheon is the tides. The effects of organic content and stagnant water on water quality were analyzed using WASP. Moreover, the changes in water quality arising due to the removal of the grit chamber were analyzed. Results indicated that BOD improved by 18.8-100%, while T-P improved by 90.0-617.4%, between the grit chamber and Hanbi-Gyo, which is located 1.3 km away from the grit chamber.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.960-965
• /
• 2014

Transmission loss of specimen is calculated by measuring energy of incident and transmission and using reverberant room of large size. But normal measurement of transmission loss has trouble because it is actually demanded that large area and specimen of certain size is satisfied with condition of diffused sound field. Especially, in case of mechanical component, interested frequency band is mid-frequency band between 500 ~ 2k Hz, and it is used to be available to minimize a reverberation chamber under conditions satisfying acoustic one because production of specimen for transmission loss measurement has limit. But, as in semi-reverberation room, it is difficult to satisfy condition of diffuse sound field and modification factor is applied to complement that. Correction factor when measuring transmission loss using semi-reverberation chamber is required accuracy because it works as main factor determining reliability of reuslts on transmission loss. In this study, it is analyzed that an effect on correction factor based on varying materials and sizes of specimens in order to deduction of it. Also It is confirmed that applied by elicited correction factor with actual railway vehicle's floor has reliability.

• 에너지공학
• /
• 제21권3호
• /
• pp.228-236
• /
• 2012

큰 에디 모사(LES)는 복잡한 연소실 유동에서 RANS 모델과 비교해 난류 유동장에 대해 모델의 보편성과 더 정확한 결과를 제공하기 때문에 점차적으로 사용이 증대되고 있다. 내연 기관의 연소실 내 난류 유동장 해석을 큰 에디 모사를 사용하여 수행하였다. 이산화 방식, 초기 조건, 시간 간격과 SGS 모델과 같은 모델과 수치 인자에 따른 영향을 평가하였다. SGS 모델을 사용한 LES 모사는 실험치와 유사한 결과를 보여주었다.

• 한국추진공학회지
• /
• 제8권1호
• /
• pp.81-84
• /
• 2004

KSR-III 축소형 연소기를 원형으로 하는 8채널 형태의 물냉각 칼로리미터를 설계/제작하였다. 설계는 1차원 경험식을 이용하였으며 시험전에 3차원 전산유동해석을 수행하여 연소시험을 위한 냉각 조건의 안전성을 확인하였다. 탄소침착물의 단열효과를 고려할 경우 노즐목 부근에서 예측한 열유속이 정확성을 가지는 것으로 확인되었으며 연소실 부근에서는 상대적으로 큰 오차를 보였다.

• 한국진공학회지
• /
• 제2권4호
• /
• pp.480-485
• /
• 1993

Factros considered building the magnetron sputtering system for TFT LCD (thin film transistor liquid crystal display0 metallization were thin film thichnes uniformity, temperature uniformity and the pressure gradient of sputtering gas flow in vacuum chamber, base pressure, and the stability fo the carrier moving . The system was consisted of a deposition chamber, a pre-heating chamber, a RF-precleaning chamber and a load/unload lock chamber. The system was designed to handle a substrate with dimension of 400$\times$400mm. The temperautre uniformity of a heater table developed showed $250 ^{\circ}C\pm$5% accuracyon the substrate glass. A base pressure of 1.8 $\times$10-7 torr was obtained after 24 hours pumping with a cryo pump. After an aluminum target was installed in a sputtering source and the film wa sdeposited on the glass, the uniformity, reflectivity and sheet resistance of the deposited film were measured.

• 한국항해학회지
• /
• 제21권4호
• /
• pp.29-38
• /
• 1997

Because of the result of a large use of electronic equipments, the occupation density of microwave frequency band is highly increased, and electromagnetic environment is getting more seriously bad. It is sometimes reported that electronic machines are not normally operated on account of the influence of undesired electromagnetic wave, which often gives fatal blow to even human life and thus becomes serious social problems. OATS(Open Area Test Site) is principally used to measure EMI or examine elelctromagnetic emission. Because of various restrictions we often build semi-anechoic chamber which has the function of OATS to measure EMI or EMS other than OATS. If the difference of the site attenuation between semi-anechoic chamber and OATS is within ${\pm}3dB$, the semi-anechoic chamber is recognized as adequate facility to measure EMI or EMS. Accordingly authors evaluate and analyze site attenuation due to absorbent materials, polarization, mutual coupling effects, etc. The calculated and the measured site attenuation in semi-anechoic chamber are compared. As a result good agreement is obtained.