• Journal of Technology Innovation
• /
• v.17 no.1
• /
• pp.49-67
• /
• 2009

As technological capabilities have enhanced, the patterns of innovation activities of latecomer firms changed to post catch-up mode. The purpose of this research is to analyze the post catch-up innovation patterns of technology-intensive small and medium firms of Korea. The innovation patterns can be divided into three types: the technology deepening innovation type, the new technology based innovation type and the architectural innovation type. The characteristics of the technology deepening innovation type are cumulative technological learning and the integration of new generic technology and existing technologies. The characteristics of new technology based type are the acquisition and revelations of new basic knowledges from former incubating organizations such as large firms and universities. The characteristics of the architectural innovation type are the learning of system architecture knowledge from former organization and interactive learning with user firms. These post catch up innovations also have some general characteristics. They effectively exploited the windows of opportunities which are opened in the middle of technological paradigm change.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.417-419
• /
• 1998

In a large diesel engine actuator position servo system, it is impossible to isolate an actuator fault from a load torque with conventional fault detection isolation (FDI) schemes because they are propagated through a channel. This paper deals with a parity equation based residual generation to isolate them in the system. The actuator fault is modelled by a multiplicative type fault that can be characterized as discrepancies between the nominal and actual plant parameters, whereas the load torque is modelled by an additive disturbance. The transformation implemented in the residual generator should be determined on-line to achieve the isolation. Simulation studies show the practical applicability of the FDI scheme.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.130-133
• /
• 2006

Solar Photovoltaics (SPV) In India has become an important renewable source of energy particularly for rural and remote areas. The vastness of the country and the requirements of electricity in far-flung villages makes SPV very attractive, with inherent technological advantages providing additional boost. This has been recognized very early by Govt. Of India and Ministry of Non-Conventional Sources of Energy (MNES) has been entrusted with promoting SPV usage in the country. Rural electrification through SPV systems is one of the programmes which is expected to provide fillip to PV industry in the country. PV Industry in India is very well established with capability of solar cell fabrication and module fabrication as well as Balance of System design and fabrication. There several R&D groups in the academic institutions who are involved in improving solar cells efficiency, thin film solar cells and PV instrumentation. Thus, India provides a ready market for large scale utilization of solar energy through SPV technology.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.610-620
• /
• 2023

The interest in the aircraft interior market is gradually growing due to technological development based on the 4th industrial revolution and competition for airlines to attract customers, and as part of that, Cabin Display System (CDS) for FAA Part.25 civil aircraft is being developed in Korea. The CDS is a system that provides various multimedia services to passengers by utilizing Flexible and Transparent Organic Light Emitting Diodes (OLED) with Integrated Display Processing Module (IDPM). This paper presents a new method for efficient Data Load Process of large-sized files and deals with their implementation and performance. The results of this study are expected to be applied to Data Load Process development of avionics that require reliable large-capacity file transmission along with reducing the costs of development compared to existing ARINC-615A.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5707-5715
• /
• 2015

Recently, construction industry has won an increasing number of orders for overseas construction projects, thereby achieving an external growth, but its competiveness is concentrated on the construction execution field. In particular, the plant field occupies most of the entire orders, which are concentrated regionally in the Middle East and Asia. In addition, low-cost orders are frequently caused by excessive competition. But its high value-added construction engineering(Below, CE) field's overseas market share and technological capacity are very low. Also, technological competiveness, in terms of order amount and other factors, is deepening in polarization between large CE companies and small and medium-sized CE firms. It is noted that the existing CE information systems mostly simply accumulate data such as design and specification standards and provide the information thereon to users, and thus have yet to provide the information essential for the CE and support such efforts. This study sought to prepare a system designed for sharing outstanding design documents information necessary for the CE industry, by category of construction so as to support the technological enhancement of the CE field. Toward that end, this study presented measures for constructing the system and services designed to exchange and share the outstanding design documents information and know-how by construction category necessary between ordering agencies and CE companies.

• Journal of Information Processing Systems
• /
• v.10 no.1
• /
• pp.1-22
• /
• 2014

Recent technological advances provide the opportunity to use large amounts of multimedia data from a multitude of sensors with different modalities (e.g., video, text) for the detection and characterization of criminal activity. Their integration can compensate for sensor and modality deficiencies by using data from other available sensors and modalities. However, building such an integrated system at the scale of neighborhood and cities is challenging due to the large amount of data to be considered and the need to ensure a short response time to potential criminal activity. In this paper, we present a system that enables multi-modal data collection at scale and automates the detection of events of interest for the surveillance and reconnaissance of criminal activity. The proposed system showcases novel analytical tools that fuse multimedia data streams to automatically detect and identify specific criminal events and activities. More specifically, the system detects and analyzes series of incidents (an incident is an occurrence or artifact relevant to a criminal activity extracted from a single media stream) in the spatiotemporal domain to extract events (actual instances of criminal events) while cross-referencing multimodal media streams and incidents in time and space to provide a comprehensive view to a human operator while avoiding information overload. We present several case studies that demonstrate how the proposed system can provide law enforcement personnel with forensic and real time tools to identify and track potential criminal activity.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.65-70
• /
• 2018

As technological development is progressing recently, various technologies are actively being studied in the course of the 4th industrial revolution. So, even in the educational field, virtual reality and augmented reality technology are used in educational environments, but specialized additional equipment is required and the price is very expensive. Also, since a plurality of equipment are required for a large number of people, it is urgent to study the technology that can be effectively applied to the industrial education field. So in this paper, we propose an industrial training system for HMD-AR, MPEG-DASH and SOAP based HTTP based Live Machinery Operation using Smartphone to solve the problems of existing system.

• Journal of Information Technology Services
• /
• v.13 no.3
• /
• pp.343-357
• /
• 2014

As science and technology infiltrates every aspects of modern society in terms of economic and social growth and development, funding for research and development (R&D) is growing rapidly. Republic of Korea is not an exception in this trend and the R&D funding in Korea has been grown about 10% every year, recently. However, as the scope and size of funding grows exponentially, need for monitoring and managing these R&D projects becoming more and more imminent. Though different types of project management systems were developed by a variety of agencies and departments and used in monitoring and managing, these systems were developed as standalone silo type systems. These systems are not connected to each other while the same researchers may involved in different projects across agencies and department. Also, these management systems are not linked to the banking systems in which real transactions of funding occurs, such as cost reimbursement and financial audit of each R&D accounts. Historically, a few fraud and malappropriation cases were found and indicted. However, as the number of these incidents grows along with the growth of R&D funding, a large scale integration/linking of project management systems and banking systems. Realizing the importance of systems integration among agencies as well as with the banking systems, situational requirements analyses were conducted concerning the current state of R&D management system. As a results, a Real-time Case Management System (RCMS) was proposed as a solution to current problems. In this paper, the collected systems requirements were documents with analyses of the situation, the architecture of the integrated systems with more user-friendly technological alternatives. This large scale linkage requires interface standardization as well as modularization of interfaces. Proposed systems architecture is introduced here with technical details of Jex Framework used,, followed by resulting technical and economic performance of the Realtime Cashflow Management System (RCMS).

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.11-14
• /
• 1997

Flexibility and efficiency in producing a large number of productions in small-to-medium lot sizes are necessary to be competitive. Many firms are concerned about cellular manufacturing system(CMS) to surmount the abrupt change in management environment and to innovate their manufacturing systems. The purpose of this study 1) align BPR with CMS, 2) present the methodology for constructing a CMS and 3) apply to a firm ad verify it. The results of this paper are to present 1) the systematic methodology for constructing CMS at first in our country, 2) the methodology integrating managerial aspects, technological aspects and behavioral aspects, 3) the customer-oriented methodology based on customer value.

• Journal of Multimedia Information System
• /
• v.7 no.1
• /
• pp.33-40
• /
• 2020

Machine learning consists of supervised and unsupervised learning among which supervised learning is used for the speech recognition objectives. Supervised learning is the Data mining task of inferring a function from labeled training data. Speech recognition is the current trend that has gained focus over the decades. Most automation technologies use speech and speech recognition for various perspectives. This paper demonstrates an overview of major technological standpoint and gratitude of the elementary development of speech recognition and provides impression method has been developed in every stage of speech recognition using supervised learning. The project will use DNN to recognize speeches using magnitudes with large datasets.