• 동력기계공학회지
• /
• 제5권1호
• /
• pp.64-72
• /
• 2001

According to the regulation of IMO, oil discharge from ships is allowed under 15ppm only and an oil filtering equipment is essential. However, for large ships using heavy fuel oil of over S.G 0.98 and viscosity 380cSt and system oil, it has been in difficulty to process with existing filtering type of oily water separator. A parallel plate type oily water separator which is one of gravity type separators can be used as an assistant equipment for the oil filtering system to meet the present IMO standard of 15 ppm, because it is an efficient method in dealing with a large amount of rich oil with high specific gravity. This work is focused on the fundamental investigation of the performance of the plate type oily water separator by visualization method and PIV(Particle Image Velocimetry) measurement to acquire multi-point velocity data simultaneously. The experimental results showed that the space of the plates acts a significant role in separating process and it was found that an important point to minimize a vortex flow is to flow a large amount of fluid in space of the plates in order to promote the efficiency of separation.

• 한국의학물리학회지:의학물리
• /
• 제13권2호
• /
• pp.55-61
• /
• 2002

본 연구는 제작된 방사선 측정시스템을 평가하기 위한 방법중의 하나인 유효측정점을 명확히 정하기 위하여 실행되었다. 일반적으로 원통형이나 두 전극간의 간격이 매우 작은 평행평판형 이온함의 경우 유효측정점은 잘 정의 되어있다. 그 정의에 의하면 그리 크지 않은 체적을 갖는 평행평판형 이온함의 유효측정점은 방사선이 입사되는 윗면의 바로 아래로 정의한다고 되어있다. 그러나 본 연구에서 제작한 이온함과 같이 두 전극간의 간격을 비교적 크게 할 경우 위의 정의는 더 이상 유효하지 않을 수도 있을 것으로 생각되어 평행평판형 이온함의 두 전극간의 간격을 3, 6, 10 mm로 하여 체적이 0.9, 1.9, 3.1 cc로 비교적 크게 한 경우에 그 유효측정점의 변화를 검토하고자 하였다. 실험은 의료용 선형가속기로부터 발생가능한 광자선 6, 10 MV와 전자선 6, 12 MeV에 대하여 시행되었으며, 방법은 이온함의 buildup의 두께를 증가시켜가면서 방사선의 측정선량이 최대가 되는 깊이를 조사하였다. 그 결과 광자선과 전자선의 경우 조사된 모든 에너지에 대하여 그 정도의 차이는 있으나 전반적으로 이온함의 체적이 커짐에 따라서 즉, 두 전극간의 간격이 멀어짐에 따라서 유효측정점이 이온함의 윗면에서부터 이온함의 중심 쪽으로 이동하는 경향을 보였다. 그 정도는 이온함 체적의 크기가 커질수록 더 크게 이동하는 양상을 보였다. 이와 같은 결과로 볼 때 평행평판형 이온함의 경우는 두 전극간의 간격이 어느 정도 큰 경우에는 유효측정점이 변하게 됨으로 이온함의 체적에 따라서 그 유효측정점을 조사할 필요가 있다고 생각된다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제22권1호
• /
• pp.5-10
• /
• 2011

The effect of sample handling condition on the rheological measurement of regenerated silk fibroin formic acid solution using parallel plate geometry was investigated. In case of loading method, the loading by pouring sample solution resulted in the best reproducibility of rheological measurement. Loading with spoon showed a high variance of viscosity value at low shear rate region ($0.01{\sim}1sec^{-1}$) while loading with syringe exhibited a low reproducibility of viscosity at high shear region ($1{\sim}100sec^{-1}$) with a disappearance of shear thinning phenomenon. It was revealed that the sample loading with small extra amount lead to the most reproducible result. The sample loading with the exact amount for the measuring plate resulted in a lack of reproducibility of high shear viscosity, while the loading with large extra volume produced a limited consistency of low shear viscosity. It was turned out that 3 min. of waiting time before measurement was the optimum condition for reliable result. When the waiting time was less than 1 min., the low shear viscosity was obtained with a lack of consistency. On the other hand, the sample solution started drying when the waiting time increased up to 5 min.

• 설비공학논문집
• /
• 제6권2호
• /
• pp.155-165
• /
• 1994

In this study, the following factors are investigated from experiments for a vertical parallel plate heat exchanger under the frosting condition ; the growth of frost layer, the characteristics of heat and mass transfer, the change of mass flow rate of the air passing through the heat exchanger, and the pressure drop of the air in the heat exchanger. The amount of heat and mass flux of water vapor transferred from the air stream to the heat exchanger surface is large at the early stage of frosting and then decreases dramatically, and the extent of decreasing rate becomes moderate with time. The frost layer formed near the inlet of the heat exchanger is thicker and denser than that formed near the outlet. It is found that the gradient of the amount of frost along the flow direction increases with time. In the early period of frost formation, the thermal resistance between the air and the cooling plate increases dramatically and then the extent of change decreases with time. Initially the convective thermal resistance is dominant. Then, while the convective thermal resistance decreases with time, the conductive thermal resistance continues to increase with time and finally the conductive thermal resistance becomes dominant.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1888-1894
• /
• 2011

In this study, large-current (75 - 400 A), high-voltage (500 - 1000 $V_{rms}$), reliable capacitors with capacitances (C) of 100 - 1000 nF were developed for energy storage facility applications. Mica was used as the dielectric of the capacitors. In order to form a parallel stack of a capacitor element, 50 ${\mu}m$ thick mica sheets with a size of $30mm{\times}35mm$ were used with lead foils for the plate lead type of mica capacitors (HCM-L), while the same sizes of mica sheets coated by Ag paste were employed with lead foils for the parallel plate terminal type (HCM-C). The developed capacitors exhibited well behaviored device characteristics which meet the requirements of the capacitors. The developed capacitors also showed excellent characteristics for thermal shock test. The stability characteristics of developed capacitors for large current stress was superior to those measured for the capacitors prepared recently by CDETm.

• Composites Research
• /
• 제18권5호
• /
• pp.15-20
• /
• 2005

본 논문에서는 복합재 파손에 의한 음향방출해석을 3차원 유한요소법과 외연시간적분법을 이용하여 구현하였다. 음원모델은 등가체적력 모델을 사용하였다. 계산기법의 타당성을 검증하기 위해 단일 섬유가 내재된 등방성 평판에서 섬유파손 시 발생하는 탄성파에 의한 동적변위를 시험과 비교하였다. 적층 복합재의 경우, 섬유와 기지를 각기 모델링한 방법과 균질화한 모델을 비교하여 차이점을 비교하였다. 음향방출에서 발생하는 고주파 성분을 검출하기 위해 계산시간 스텝이 매우 작아야 하며, 매우 많은 자유도의 모델이 동반되어야 한다. 이러한 대규모 문제를 효과적으로 해결하기 위해 병렬 계산 기법을 도입하였다.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1447-1454
• /
• 2006

The evaluation of parallel performance of a high speed impact simulation is not an easy task because not only the development of parallel explicit code is difficult but also a large number of processors is not easily accessible. In this paper, the parallel performance of a new Lagrangian FEM impact code carried out on cluster supercomputer has been described in high speed range. In the case of metal sphere impacting to oblique plate, the overall speed-up continuously increases even up to 128 CPUs. Investigation of elapsed time of each part reveals that most of the inefficiency comes from the load imbalance of contact.

• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.48-53
• /
• 1994

The problem of a plane wave impinging upon a semi-infinite paralle-plate waveguide is investigated. The interior fields can be analyzed by converting the initial field into vaveguide modes. Kirchhoff approximation is usually made at the waveguide aperture in the literature. In this paper, a modified approximation is made using the Uniform Gemetrical Theory of Diffraction(UTD). Numerical results show excellent agreement between UTD-supplemented mode-matching solution and UTD solution.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권9호
• /
• pp.471-475
• /
• 2001

ln this paper, a micromachined micromechanical switch is presented. The presented switch is operated in the vertical direction to the substrate by an electrostatic force between two parallel plates. The moving plate is pulled down to connect the bumps of the bias node$(V_{DD}/ or GND)$ to the bumps of the output node when a oltage difference exists between the moving plate and the input plate. The switch was designed to operate at a low switching voltage$(\risingdotseq5V)$ by including a large-area, narrow-gap, parallel plate capacitor A theoretical analysis of the designed switch was performed in order to determine its geometry fitting the desired pull-in voltage and release voltage. The designed switch was fabricated by surface micromachining combined with Ni electroplating. From the experimental results of the fabricated switch, its pull-in voltage came Out to be less than 5V and the measured maximum allowable current was 150mA. The measured average ON-state resistance was about 8$\Omega$, and the OFF-state resistance was too high to be measured with digital multimeter.

• 로봇학회논문지
• /
• 제6권1호
• /
• pp.78-85
• /
• 2011

This article investigates kinematic characteristics of a Sch$\ddot{o}$nflies motion generator which represents a mechanism having translational three Degree-of-Freedom (DOF) and rotational one-DOF motion about a fixed axis. The mechanism consists of the base plate and the moving plate, and four identical limbs connecting them. Each limb employs two revolute joints (RR), one parallelogram (Pa), and two revolute joints (RR) from the base plate to the moving plate. The mechanism is driven by four actuators which are placed on the base plate to minimize dynamic loads. It is shown through simulations that the mechanism can be designed to secure large dexterous workspace and thus has very high potential for actual applications such as haptic devices and high-speed requiring tasks such as pick-and-place operations, riveting, screwing tasks, etc.