• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.74.1-74.1
• /
• 2011

Square Kilometer Array(SKA)는 1평방킬로 미터에 달하는 넓은 집광 면적 (very large collecting area), 넓은 시야(very large field of view), 광대역 주파수(very wide frequency range), 긴 기선(very large baseline)을 갖추고, 전파천문학의 연구를 획기적으로 향상시킬 전파망원경으로 기획되고 있는 초대형 국제협력 사업이다. 본 발표에서는 SKA를 위해 제안된 key science를 개관한 후, SKA 참여를 목표로 국내에서 수행되고 있는 science 연구를 요약한다.

• Korean Journal of Optics and Photonics
• /
• v.34 no.4
• /
• pp.139-150
• /
• 2023

Despite various light detection and ranging (LiDAR) architectures, it is very difficult to achieve long-range detection and high resolution in both vertical and horizontal directions with a wide field of view (FOV). The scanning architecture is advantageous for high-performance LiDAR that can attain long-range detection and high resolution for vertical and horizontal directions. However, a large-area photodetector (PD), which is disadvantageous for detection speed, is essentially required to secure the wide FOV. Thus we propose a PD based on the static unitary detector (STUD) technique that can operate multiple small-area PDs as a single large-area PD at a high speed. The InP/InGaAs STUD PIN-PD proposed in this paper is fabricated in various types, ranging from 1,256 ㎛×949 ㎛ using 32 small-area PDs of 1,256 ㎛×19 ㎛. In addition, we measure and analyze the noise and signal characteristics of the LiDAR receiving board, as well as the performance and sensitivity of various types of STUD PDs. Finally, the LiDAR receiving board utilizing the STUD PD is applied to a 3D scanning LiDAR prototype that uses a 1.5-㎛ master oscillator power amplifier laser. This LiDAR precisely detects long-range objects over 50 m away, and acquires high-resolution 3D images of 320 pixels×240 pixels with a diagonal FOV of 32.6 degrees simultaneously.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.237-242
• /
• 2003

During the past, digital orthophoto is generated for rural area or low resolution image, because the accurate extraction of DEM is difficult for urban area. But, nowadays, high resolution DEM by ALS system starts to become available for urban area, so the importance of large scale digital orthophoto generation becomes increasing. In this paper, we propose and describe effective algorithm for detecting occlusion area and not only restoring occlusion area but also processing null pixels by occlusion area for minimizing the heterogeneity of digital orthophoto. With proposed algorithm, we detected occlusion area due to height of structures such as buildings, bridges, etc, and restored occlusion area using reference image. Also, The homogeneity of generated digital orthophoto was improved by using brightness correction.

• Animal cells and systems
• /
• v.8 no.2
• /
• pp.81-87
• /
• 2004

Male red-spotted newts, Notophthalmus viridescens, use chemical cues to locate and select potential mates. To investigate whether large and small males respond differentially to chemical cues from conspecifics, we conducted a series of two-choice Y-maze tests with odorant stimuli from two large females (LF/LF), one large versus one small female (LF/SF), and one large female placed with four males versus one small female (LF+4M/SF). We found that males responded more rapidly in a LF/LF choice situation than in those involving LF/SF or LF+4M/SF. In addition, small males chose more quickly than did large males. These results suggest that both body size and odorant context affect the speed of odorant responses. By responding differentially to conspecific chemical cues, small males may arrive earlier at a courting area, increasing their chances of successfully guarding and mating with a female.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.650-651
• /
• 2006

This paper presents a study of large grains by transmission electron microscopy in two WC-Co alloys, one W rich and one C rich. In the W rich alloy, some large grains are found in contact with the $\eta$ phase. The C content influences the morphology of large grains: they are flatter in the C rich alloy with smoother interfaces. Whatever the C content, they contain few dislocations compared to matrix grains except often in a small area. Small WC grains are often found inside the large grains. They have likely been engulfed during the growth of the large grains owing to the low boundary energy.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.5
• /
• pp.11-19
• /
• 2014

The objective of this research was to investigate concentration and load of nutrients such as total nitrogen (TN), nitrate nitrogen ($NO_3$-N) total phosphorous (TP), and phosphate phosphorous ($PO_4$-P) in a 23.4-ha paddy fields watershed with river water source. Water samples for irrigation water, drainage water, ponded water and groundwater were collected, and irrigation and drainage water were measured at 5~10 day intervals during normal days and at 2~6 hours intervals during three storm events. The amount of irrigation water in the study area was over 2,000 mm, which is almost identical to that in the area irrigated from a large reservoir but much more than that in the area irrigated from a pumping station. Mean flow-weighted concentrations of TN and TP in irrigation water were 2.8 and 0.15 mg/L, respectively, higher than those in the area irrigated from a large reservoir or a pumping station. The ratios of irrigation load to total inflow load for TN and TP were 88 %, and the ratios of surface outflow load to total outflow load for TN and TP were over 90 %, indicating that total nutrient load may be greatly affected by water management. The nutrient loads per area in the study area were estimated as TN 21.1 kg/ha and TP 1.1 kg/ha. Especially, the TP load per area in the study area was smaller than that in the area irrigated from a large reservoir or a pumping station. This may be because outflow load is not high likely due to sedimentation of particulate P and irrigation water load is high due to high TP concentration in irrigation water and high amount of irrigation water.

• Journal of Korean Society of Forest Science
• /
• v.104 no.1
• /
• pp.117-126
• /
• 2015

Forest statistics of local administrative districts have many social needs, nevertheless we have some difficulties for working out an accurate statistics because of insufficient data in small-area level. Thus, new small-area estimation method has to set aside additional data, decrease errors of statistics and consider the local forest characteristics at the same time. In this study, we researched the spatial divisions that can set aside additional data for statistics production and satisfy the major premise, which is "forest characteristics of spatial divisions have to be equal to that of small-area". And we compared synthetic estimation methods based on three different spatial divisions(provinces, neighbor districts and new expanded districts). New expanded districts were divided based on the criteria of climate, soil type and tree species composition that affects local forest characteristics. Small-area statistics were assessed in terms of the ability to estimate local forest characteristics and consistency within large-area statistics. As a result, new expanded districts synthetic estimation was assessed to calculate statistics that reflects local forest characteristics better than other two estimation methods. Moreover, this synthetic estimation method produced the statistics that was included within 95% confidence interval of large-area statistics and was the closer to large-area statistics than the neighbor districts synthetic estimation.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.3
• /
• pp.254-261
• /
• 2015

Objective : The present study aims to investigate 1) the risk factors for hydrocephalus and subdural hygroma (SDG) occurring after decompressive craniectomy (DC), and 2) the association between the type of SDG and hydrocephalus. Methods : We retrospectively reviewed the clinical and radiological features of 92 patients who underwent DC procedures after severe head injuries. The risk factors for developing post-traumatic hydrocephalus (PTH) and SDG were analyzed. Types of SDGs were classified according to location and their relationship with hydrocephalus was investigated. Results : Ultimately, 26.09% (24/92) of these patients developed PTH. In the univariate analyses, hydrocephalus was statically associated with large bone flap diameter, large craniectomy area, bilateral craniectomy, intraventricular hemorrhage, contralateral or interhemisheric SDGs, and delayed cranioplasty. However, in the multivariate analysis, only large craniectomy area (adjusted OR=4.66; p=0.0239) and contralateral SDG (adjusted OR=6.62; p=0.0105) were significant independent risk factors for developing hydrocephalus after DC. The incidence of overall SDGs after DC was 55.43% (51/92). Subgroup analysis results were separated by SDG types. Statistically significant associations between hydrocephalus were found in multivariate analysis in the contralateral (adjusted OR=5.58; p=0.0074) and interhemispheric (adjusted OR=17.63; p=0.0113) types. Conclusion : For patients who are subjected to DC following severe head trauma, hydrocephalus is associated with a large craniectomy area and contralateral SDG. For SDGs after DC that occur on the interhemispherical or controlateral side of the craniectomy, careful follow-up monitoring for the potential progression into hydrocephalus is needed.

• Journal of Embryo Transfer
• /
• v.15 no.3
• /
• pp.263-270
• /
• 2000

The ovaries of 178 Holstein heifers or cows (heifer; 41, 1 parity; 72, 2$\leq$ parity; 65) on Day 6 or 7 (Day 0=day of estrus) were examined by transrectal ultrasonography. Diameter of corpus luteum (CL) and large follicle ( $\geq$ 10 mm), and luteal tissue area were determined by ultrasound system with a 5 MHB rectal probe. Blood samples were taken to progesterone analysis. After selection of recipients, frozen Holstein embryos were thawed and directly transferred to recipients non-surgically. The diameter of CL and luteal tissue area was greater (P<0.01) on Day 7 than on Day 6 in heifers, 1 parity or 2 $\leq$ parity cows, respectively, although progesterone concentrations were not different. The presence of fluid-filled luteal cavitied or multiple CL (2 or more) did not affect serum progesterone concentration. A large follicles were observed in 67.4% of heifers or cows and the average diameter was 14.1 mm. Greater luteal tissue area attributed higher pregnancy in heifers, but not in cows, although there were no difference on pregnancy rate according to progesterone concentration in heifers or cows. The pregnancy rate of recipients contained a large follicle at embryo transfer was lower than that of recipients not contained. These results show ultrasonic assessment of ovaries in Holstein recipients is a reliable tool to determine the follicle and CL for recipient selection.

• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.647-654
• /
• 2015

Self-assembled monolayers(SAM) of microspheres such as silica and polystyrene(PS) beads have found widespread application in photonic crystals, sensors, and lithographic masks or templates. From a practical viewpoint, setting up a high-throughput process to form a SAM over large areas in a controllable manner is a key challenging issue. Various methods have been suggested including drop casting, spin coating, Langmuir Blodgett, and convective self-assembly(CSA) techniques. Among these, the CSA method has recently attracted attention due to its potential scalability to an automated high-throughput process. By controlling various parameters, this process can be precisely tuned to achieve well-ordered arrays of microspheres. In this study, using a restricted meniscus CSA method, we systematically investigate the effect of the processing parameters on the formation of large area self-assembled monolayers of PS beads. A way to provide hydrophilicity, a prerequisite for a CSA, to the surface of a hydrophobic photoresist layer, is presented in order to apply the SAM of the PS beads as a mask for photonic nanojet lithography.