• 방사선산업학회지
• /
• 제5권4호
• /
• pp.317-323
• /
• 2011

Radioisotopes have been widely used throughout industry to optimize processes, solve problems and improve product quality. A gamma scanning technique using radiation via sealed source (Co-60) was carried out in order to investigate vertical density profile of catalyst regenerator of RFCCU. Also through the radiotracer experiments, the flow characteristics of catalyst was measured. The catalyst samples were irradiated with neutron in HANARO reactor to produce lanthanum-140 to be used as radiotracer for tracing the catalyst itself in catalyst regenerator of RFCCU. The radiotracer was monitored around the catalyst regenerator using collimated NaI scintillation detectors. The results of the experiments were used to diagnose the performance of the RFCCU.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.705-708
• /
• 2001

The effect of grinding on the synthesis of LaAO$_3$ceramics was investigated. The mixture ground by plantary ball mill showed 70nm particle size (wet ball mill or unground=0.5 $\mu$m). Monophase LaAlO$_3$powders were formed when ground samples were heated at 100$0^{\circ}C$, however unground samples required temperatures above 130$0^{\circ}C$. Density of the ground samples sintered at 140$0^{\circ}C$ showed 98.3% of theoretical density (unground=93.5% at 150$0^{\circ}C$). Dielectric constant of the ground samples($\varepsilon$r=22.4) showed higher values than that of the unground samples($\varepsilon$r=20.32). Temperature coefficient of capacitance($\tau$$_{c}$) and dielectric loss (tan$\delta$) of the ground samples were similar to those of unground samples.s.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1182-1186
• /
• 1997

La0.8Ca0.2Cr0.98O3 powder was prepared using the modified Pechini process. Various crystalline phases formed during thermal decomposition were investigated. (La,Ca)CrO4 phase, first formed from the precursor, was transformed to (La,Ca)CrO3 and CaCrO4 above 80$0^{\circ}C$, which remained up to 110$0^{\circ}C$. However, only (La,Ca)CrO3 phase consisting of orthorhombic and intermediate rhombohedral polymorphs was observed after sintering at 125$0^{\circ}C$. The specimens sintered at 140$0^{\circ}C$ exhibited 98% of relative density and rather wide grain size distribution with average grain size of 3-4 ${\mu}{\textrm}{m}$. Densification and grain growth of the specimens observed above 125$0^{\circ}C$ were presumably attributed to liquid phase sintering resulted from melting of Ca3(CrO4)2 phase.

• 한국자기학회지
• /
• 제9권5호
• /
• pp.239-244
• /
• 1999

란탄 망가나이트에 Bi를 첨가한 벌크 시료(La0.67xBixCa0.33MnO3(x=0, 0.04, 0.1, 0.2)들을 세라믹스 제조공정을 이용하여 제조했다. 제조한 시료들의 결정성과 미세구조를 x-선 회절분석과 광현미경으로 조사하고, 자기 및 자기저항 특성을 100~300K의 온도 범위에서 0.4~0.5T의 자기장을 인가하여 진동시료형자력계와 van der Pauw법으로 조사했다. Bi를 소량(x=0.04, 0.1) 첨가한 시료의 경우 시료를 제조할 수 있었다. 또한 Bi를 소량 첨가하는 것에 의해 측정한 대부분의 온도에서 비저항이 감소하였고 자기저항비가 증가하였다. 아울러 실온에서 약한 자기장(0.4T)하에서도 큰 자기저항비(x=0.1의 경우 15%)를 나타냈다.