• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.3
• /
• pp.169-177
• /
• 2014

Operation and control system has been installed and tested to use energy storage system(ESS) for frequency regulation at 4MW class of ESS demonstration facility installed at Jeju island, Korea in 2013. Simulation tests were performed by programing language C# for power system of Jeju island to develop control algorithm. Site simulation tests were performed in control system itself without connecting power system and energy storage system. Control algorithm was coded, modified and tested to load to controller and communication system and human-machine interface were developed and tested in the process of simulation tests. After similar results to that of simulation tests by programing language were obtained, power system and energy storage system demonstration facility were connected to control system by communication system. Energy storage system for frequency regulation was tested for actual frequency and simulation frequency. The site tests showed the similar results to that of simulation tests and the control systems is possible to be operated for frequency regulation. Faster response of energy storage system for frequency regulation, less costs and less capacity of energy storage systems which cover for frequency regulation of power plants. It is expected that more studies for time-reduction and time-delay elements can make less capacity of energy storage system cover more role of frequency regulation of power plants.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.78-85
• /
• 2011

In vehicle ad-hoc network (VANET) environments, traffic related information such as accident information, emergency information and real time traffic condition have to be delivered to on-board-unit (OBU) or/and road-side-equipment (RSE) for preventing traffic accidents in advance. In this paper, we introduce a Multi-Channel MAC (MCM) since the existing single channel operation may cause packet transmission delay and unexpected communication failure. To offer a seamless safety message transmission during the various services, it is necessary to manage the MAC scheduler in wireless access in vehicular environments (WAVE) systems. The MCM consists of MAC softwares and MAC hardwares where the former and the later ones are implemented with real time operation system based C language and FPGA module with VHDL language, respectively. The performance and QoS are verified by practical measurements and compared with the scheme using single channel operation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.4
• /
• pp.593-605
• /
• 2014

In this paper, we propose the efficient HW/SW co-design method of light-weight cryptography such as HIGHT, PRESENT and PRINTcipher using GEZEL. At first the symmetric cryptographic algorithms were designed using the GEZEL language which is efficiently used for HW/SW co-design. And for the improvement of performance the HW optimization theory such as unfolding, retiming and so forth were adapted to the cryptographic HW module conducted by FSMD. Also, the operation modes of those algorithms were implemented using C language in 8051 microprocessor, it can be compatible to various platforms. For providing reliable communication between HW/SW and preventing the time delay the improved handshake protocol was chosen for enhancing the performance of the connection between HW/SW. The improved protocol can process the communication-core and cryptography-core on the HW in parallel so that the messages can be transmitted to SW after HW operation and received from SW during encryption operation.

• Journal of Korean Medical classics
• /
• v.36 no.3
• /
• pp.55-87
• /
• 2023

Objectives : To examine changes in Korean Medicine during Japanese occupation through major Joseoneo dictionaries. Methods : Based on the Keun Sajeon, published in 1957 by the Korean Language Society, the most recently published among the major dictionaries under Japanese occupation, key Korean Medical terminology in the Joseoneo Sajeon, published in 1920 by the governor-general of Joseon, and the Joseoneo Sajeon, published in 1938 by Mun Seyeong were analyzed. The differences among the dictionaries provided insight into the situation which Korean Medicine was in. Results : 1) There was a lack of consistency among Korean Medical terminology. 2) Changes in medical policies and legislation were reflected in the Korean Medical terminology without much delay. 3) Korean Medicine was distinguished as a separate category in the Keun Sajeon for the first time. 4) With the exception of Korean Medicine specific terminology, most were explained using 'modern' concepts and ontology. Conclusions : Modernization lead by the Japanese splintered many areas of Joseon society, and Korean Medicine was no exception. This transition period as reflected in the terminology within the Joseoneo dictionaries show that Korean Medicine went through a process of regulation by changes in medical policies and legislation, while new, modern studies brought in by the Japanese started replacing language and ontology of pre-occupation Joseon. A look into Korean Medicine during Japanese occupation through Joseoneo dictionaries allows us to examine the connection between Korean Medicine and the more broader historical context in which it was situated.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.21-30
• /
• 1998

In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.4
• /
• pp.603-610
• /
• 1995

In this paper, we present a highly efficient simulation package which supports simulation from functional level to gate level. The package consists of a set of front-end tools, a logic simulator, named HSIM(Highly efficient logic SIMulator), and an waveform analyzer. The front-end tools include a netlist compiler, functional primitive compiler and behavioral compiler. Key feature of developed simulator is that the compiled behavioral models written in C language are directly executed in the simulation engine using incremental loader. By doing so, we achieved significant speed up as compared with the interpretive functional simulator. Experimental results show that HSIM runs about 55% faster than traditional unit-delay event-driven interpretive simulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.346-349
• /
• 2004

The teleoperation system applies all of the industrial fields due to the development of the network infrastructure. It is one of the indispensable elements for controlling the robot at a remote sight and monitoring the limit or unknown environment. The common teleoperation robot system is what has the visual module to supply the network system and realistic UI to the existed robot system. Therefore, remarked that the fusion between modules and transmission of visual data the remarked the important element to improve the robot application in the various environments. Delay of development time by robot platform and noneffective communication among developers are also problem to approach. In this paper we propose the independent teleoperation system. The main application language is JAVA in this system, which is applied JAVA API like JNI and JMF to construct the effective teleoperation system. The system has the both side communication system between sever and client as a basic structure. The visual data that is attached the robot at a remote sight is captured by JMF API and then is transmitted to the web browser called client by RTR protocol. JNI is used to connect between JAVA and the lower part application (sensor fusion, motion control.) of the robot programmed by various Native languages. The proposed system is the application that can perform the elements, for instance transmission of visual data, the fusion of various native application modules and the effective network communication, with any platform.

• Phonetics and Speech Sciences
• /
• v.5 no.1
• /
• pp.27-38
• /
• 2013

Healthcare providers in Korea are using conservative pharmacological treatment for Alzheimer's disease (AD) to delay the progress of the disease or to mitigate its behavioral and neurological symptoms. However, there is a growing need for interventions using practical non-pharmacologic treatment, as the effects of pharmacological treatments has faced limitations. This research provided a cognitive rehabilitation program to 3 AD patients and used a multiple baseline design across subjects to examine the effects. Performing reality orientation therapy (ROT) for 1 cycle (4 weeks) resulted in a slight increase in accuracy and responsiveness on an orientation task, mainly with patients with mild cases of AD. Also, in the sub-domain of the Korean-Mini Mental Status Examination performed to examine changes in cognitive ability, there were minimal changes in place orientation. In functional communication, however, there were no significant differences before and after the intervention. In conclusion, we found that ROT was an effective intervention for improving accuracy and responsiveness in the orientation of patients with mild cases of AD. In future studies, the effect of non-pharmacological interventions can be evaluated more reliably by examining the interaction effects of sample size, length of the intervention, outcome measurements, and pharmacological intervention.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1326-1331
• /
• 2005

A product is designed through the collaboration among engineers in several fields such as design, analysis, and manufacturing. These series of functions are performed repeatedly during the design process. An easy access and exchange of the model data is one of the important elements that help to shorten production development time. Especially, the importance of data exchange between CAD and CAE applications is increasing in the field of verification and estimation of the products. However, information and knowledge of model which is generated by a CAD software cannot be transferred by a function of CAE software, as an exchange of product data between CAD and CAE applications. It causes a delay in design analysis and eventually discourages a designer's effort in improving his design. Therefore, we need to integrate a commercial CAD and CAE applications effectively and to use the same interface on a product model obtained in a distributed environment. This paper shows how to implement a model exchange between CAD and CAE by a web-service and how to provide a communication environment among engineers.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.12 s.189
• /
• pp.95-102
• /
• 2006

A product is designed through the collaboration among engineers in several fields such as design, analysis, and manufacturing. These series of functions are performed repeatedly during the design process. An easy access and exchange of the model data is one of the important elements that help to shorten production development time. Especially, the importance of data exchange between CAD and CAE applications is increasing in the field of verification and estimation of the products. However, information and knowledge of model which is generated by a CAD software cannot be transferred by a function of CAE software, as an exchange of product data between CAD and CAE applications. It causes a delay in design analysis and eventually discourages a designer's effort in improving his design. Therefore, we need to integrate a commercial CAD and CAE applications effectively and to use the same interface on a product model obtained in a distributed environment. This paper shows how to implement a model exchange between CAD and CAE by a web-service and how to provide a communication environment among engineers.