• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.343-346
• /
• 1999

We have investigated the dielectric and electrical characteristics of palrnitic acid(PA), stearic acid(SA) and arachidic acid(AA) Langmuir-Blodgett(LB) films because these fatty acid systems have a same hydrophilic group and a different hydrophobic one(alky1 chain lqngth). The dielectric characteristics such as the capacitance-frequency(C-F) characteristics and the dielectric dispersion and absorption characteristics of PA, SA and AA through-plane were measured. In the result, the relative dielectric constants of PA, SA and AA LB films were about 3.0-4.6, 2.7-4.1 and 2.4-3.8, respectively. The relative dielectric constants were decreased in proportion to the chain length of alkyl group. Also, the dielectric dispersion and absorption of each fatty acid LB films have arisen from the dipole polarization in the range of $10^4~10^5[Hz]. And, the conductivity of PA, SA and AA LB films obtained from I-V characteristics were about $9{\times}10^{-14}, 3{\times}10^{-l4} and 5{\times}10^{-15}[S/cm], respectively. These results have shown the insulating materials and could control the conductivity by changing the length of alkyl group. Also, we have confirmed that the barrier height of fatty acid systems were about 1.32-1.40[eV] and the dielectric constant were about 3.0-4.2. These values were almost the same ones obtained from dielectric characteristics.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.962-964
• /
• 1999

We studied emitting properties of devices fabricated using the spin-coating and Langmuir-Blodgett[LB] technique. The LB technique has the advantage of precise control of the thickness better than spin-coating method. Poly(3-hexylthiophene)[P3HT] LB films used as the emitting layer in light-emitting devices. LB monolayers were deposited 27 layers onto the indium-tin-oxide[ITO] as Y-type films by the vertical dipping method. The thickness is about 80nm. Absorption spectrum of LB films presented that P3HT is regiorandom conformation. Also, current-voltage-luminance characteristics and electroluminescence spectra of light-emitting devices fabricated by LB method is studied. In current-voltage-luminescence characteristics, turn-on voltage of P3HT LB film LEDs is higher than that of spin-coating LEDs. But electroluminescence spectrum is similar to the spin-coating LEDs. The orange-red light was clearly visible in a darkened room.

• Journal of the Korean Chemical Society
• /
• v.37 no.7
• /
• pp.642-647
• /
• 1993

Monolayers of pure surfactant squaraine, DSSQ(4-distearyl amino phenyl-4'-dimethylaminophenylsquaraine), were deposited on $SnO_2 $ electrodes by the Langmuir-Blodgett film technique. The DSSQ film exhibits ${\lambda}_{max}$ at ∼530 nm. The absorption is significantly red-shifted from the solution of DSSQ (633 nm in chloroform), suggesting that the squaraine chromophores form aggregates in the LB film. The photogeneration of the squaraine aggregates is studied by measuring the photocurrents in photoelectrochemical cells consisting of the squaraine of the aggregates is found to parallel its absorption spectrum and quantum efficiency as high as 0.3% has been observed. While the photocurrent was attenuated exponentially when stearic acid layers (up to 8 layers) are inserted between the squaraine layer and the electrode, it is nearly extinguished when the squaraine layer is over-coated with 2 layers of stearic acid. A model for the observation is proposed and the roles of the electrolytes and oxygen on the photogeneration process will be discussed.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.5
• /
• pp.544-548
• /
• 1998

A Monte Carlo simulation incorporated with the genetic algorithm is presented to describe the defect known as "transition from Y-to X-type deposition" of the cadmium arachidate Langmuir-Blodgett multilayer film. Simulation is performed based on the detachment models of XY-type deposition. The transition is simulated by introducing a probability of surface molecule detachment considering interaction between neighboring molecules. The genetic algorithm is incorporated into Monte Carlo simulation to get the optimum value of the probability factors. The distribution of layers having different thickness predicted by the simulation correlates well with the measured distribution of thickness using the small-angle X-ray reflectivity. The effect of chain length and subphase temperature on the detachment probability are investigated using the simulation. Simulation results show that an increase (or a decrease) of two hydrocarbon chain is roughly equivalent to the detachment probability to a temperature decrease (or increase) of 15 K.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.224-231
• /
• 2009

Techniques measuring Maxwell displacement current (MDC) and LB films surface measuring technique have been applied to the study of monolayers of polyamic acid containing azobenzene. MDCs was generated from monolayers on the water surface by monolayer compression and expansion. It was generated when the area per molecule was about $103{\AA}^2\;and\;78{\AA}^2$ just before the initial rise of the surface pressure during the 1st and 2nd mixed monolayer compressions cycle, respectively. It was the maximum of MDCs appeared at the molecular area just before the initial rise of surface pressure in compression cycles, and we have found that the increase of aggregations causes the noticeable increase of the surface roughness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1991.10a
• /
• pp.7-9
• /
• 1991

$\prod$-A characteristics of N-docosylquinolium-TCNQ complex were investigated with the following variations. I> $\prod$-A characteristics with a variation of spreading amount. ii> $\prod$-A characteristics with a variation of barrier speed. iii> $\prod$-A characteristics with a variation of subphase temperature. An optimum surface pressure for a deposition of Langmuir-Blodgett(LB) layer was found to be a 40∼50 mN/m in pure water subphase (pH 5.4, $25^{\circ}C$).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.5-8
• /
• 1997

A study on the electrical conduction characteristics of the ultrathin organic films is one of the important factors for the development of molecular electronic devices. The Langmuir- Blodgett(LB) technique has recently been attracted interest as a method of the deposition ultrathin films. We hate fabricated N-docosyl N\`-methyl viologen-diTCNQ(DMVT) anion radical LB film and investigated the molecular orientation and electrical conduction characteristics. We have measured infrared transmission-reflection spectra. The alkyl chain is found to he well-ordered with the tilt angle of 13$^{\circ}$ with respect to the substrate surface normal and the TCNQ plane is tilted at 76$^{\circ}$ the surface normal. In ESR spectrum, we confirmed that a half-amplitude linewidth is clearly dependent on the incident angle, which indicates conducting species change. The in-plane conductivity of 31 lagers is approximately 1.33$\times$10$^{-6}$ S/cm. The ohmic behaviour was observed below 0.6 V, when current-voltage(I-V) characteristics was measured verically.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1980-1982
• /
• 1999

Conductive Langmuir-Blodgett(LB) films have recently attracted much interest from the viewpoint of ultrathin film conductors at the molecular level. The result shows that the Maxwell-displacement-current (MDC) measuring technique is useful in the detection of phase-transitions over the entire range of molecule areas. In this parer, electrical properties of PBDG Langmuir(L) films were investigated using a displacement current measuring technique with pressure stimulation. Displacement current was generated When the Spread volume $150{\mu}{\ell}$ and compression velocity was about 30, 40, 50 mm/min. In the result, it is known that current is generated of higher current peek as compression velocity become faster.

• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.311-329
• /
• 1991

Electrochemical behavior of surface active Osmium bipyridine complex adsorbed in a monomolecular layer on tin oxide electrodes by the Langmuir-Blodgett method was studied. Theoretical equation of cyclic voltammetry of electrode reactions for redox species adsorbed as monolayer form was discussed by reversible and quasi-reversible waves. The film was transferred onto the $SnO_2$ electrode surface and then amounts of charge on the electrode were measured in the technique of cyclic voltammetry. The electron transfer mediation of these monolayer with $Fe^{2+}$, TEMPOL and others were studied. And the cyclic voltammetry were simulated by taking into account the interaction parameters. From these values, we found it possible to fit almost all measured cyclic voltammograms with these parameters. The recent works and directions using LB method were introduced with various applicable field.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.2
• /
• pp.87-91
• /
• 2000

Metal ion complex of poly(N-(2,4-imidazoly)ethyl)maleimide-alt-l-octadecene (IMO-O) polymer used to confirm the possibility of molecular device made by Langmuir-Blodgett(LB) method. Electrical properties of the metal ion complex LB film were investigated using Metal/Insulator/Metal(MIM) structure. In the surface pressure-area($\pi$-A) isotherm of IMI-O polymer, the surface pressure at collapse point has a difference due to the interaction between polymer and metal ions. And the complex between polymer and metal ions could be verified through the investigation by Raman spectroscopy. In the current-voltage(I-V) property, the conductivity change of IMO-O polymer complexes due to the kinds of metal of metal ions couldn't be observed. However, the limiting area of molecules was changed by the concentration of the metal ions and the conductivity was increased with the occupied molecular area.