• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.111-114
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have been attracted lots of interests in large-area light-emitting display. In this stuffy, an emissive layer was fabricated using Langmuir-Blodgett(LB) technique in organic light-emitting (OLEDs). This emissive organic material was synthesized and named PECCP[poly(3.6-N-2-ethylhexyl carbazolyl cyanoterephthalidene)] which has a strong electron donor group and an electron acceptor group in main chain repeated unit. This material has good solubility in common organic solvents such as chloroform. THF, etc, and has a good stability in air. The Langmuir-Blodgett(LB) technique has the advantage of precise control of the thickness down to the molecular scale, In particular, by varying the film thickness it is possible to investigate the metal/polymer interface. Optimum conditions for the LB film deposition are usually determined by investigating a relationship between a surface pressure $\pi$ and an effective are A occupied by one molecule on the subphase. The LB films were deposited on an indium-tin-oxide(ITO) glass at a surface pressure of 10 mN/m and dipping speed of 12 mm/min after spreading PECCP solution on distilled water surphase at room temperature, Cell structure was ITO/PECCP LB film/Alq$_3$/Al. We considered PECCP as a hole -transport layer inserted between the emissive layer and ITO. We also used Alq$_3$ as an emissive layer and an electron transport layer. We measured current-voltage(I-V) characteristics, UV/visible absorption, PL spectrum and EL spectrum of the OLEDs.

• 센서학회지
• /
• 제31권4호
• /
• pp.249-254
• /
• 2022

To achieve high-performance colloidal quantum dot light-emitting diodes (QD-LEDs), the use of a densely packed QD film is crucial to prevent the formation of leakage current pathways and increase in interface resistance. Spin coating is the most common method to deposit QDs; however, this method often produces pinholes that can act as short-circuit paths within devices. Since state-of-the-art QD-LEDs typically employ mono- or bi-layer QDs as an emissive layer because of their low conductivities, the use of a densely packed and pinhole-free QD film is essential. Herein, we introduce the Langmuir-Blodgett (LB) technique as a deposition method for the fabricate densely packed QD films in QD-LEDs. The LB technique successfully transfers a highly dense monolayer of QDs onto the substrate, and multilayer deposition is performed by repeating the transfer process. To validate the comparability of the LB technique with the standard QD-LED fabrication process, we fabricate and compare the performance of LB-based QD-LEDs to that of the spin-coating-based device. Owing to the non-destructiveness of the LB technique, the electroluminescence efficiency of the LB-based QD-LEDs is similar to that of the standard spin coating-based device. Thus, the LB technique is promising for use in optoelectronic applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.263-264
• /
• 2006

본 연구에서는 Arachidic acid Langmuir-Blodgett (LB)막의 계면특성과 전기적 특성을 측정하였다. Arachidic aicd는 포화지방산으로 ($CH_3(CH_2)_{18}COOH$)의 구조를 가지며, 크기가 27.5[$\AA$]으로 $CH_3(CH_2)_{18}$의 소수기와 COOH의 친수기로 구성되어 있다. LB막은 박막제작시 배열과 배향의 제어가 용이하다. Chloroform을 용매로 하여 2[mmol/l]의 농도를 조성하여 ${\pi}-A$ 등온선을 통해 기체 상태, 액체 상태, 고체 상태를 관찰하였으며 편광각 현미경 (Brewster angle microscopy) 이미지를 통해 각 상태에서의 이미지를 관찰하였다. 또한 LB막의 제작시 사용되어진 ITO 기판은 친수처리 전 후의 접촉각의 측정을 통하여 막의 안정성을 확인하였다. 또한 LB막을 Metal/LB막/Metal 구조의 소자로 제작하여 전압-전류 특성을 측정하였다.

• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.724-731
• /
• 2006

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with 4-octyl-4'-(5-carboxylpentamethyleneoxy)azobenzene (denoted as 8A5H) and phospholipid(L-a-dimyristoylphosphatidylcholine, denoted as DMPC and L-a-dilauroylphosphayidylcholine, denoted as DLPC). The LB films of 8A5H, 8A5H-DMPC and 8A5H-DLPC mixture monolayers were deposited by using the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by using cyclic voltammetry with a three-electrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0 mol/L) of $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rates were 50, 100, 150 and 200 mV/s, respectively. As a result, LB films of 8A5H and 8A5H-DLPC mixture monolayers appeared irreversible process caused by only the oxidation current from the cyclic voltammogram and LB films of 8A5H-DMPC monolayer mixture was found to be caused by a reversible oxidation-reduction process.

• 센서학회지
• /
• 제28권1호
• /
• pp.23-29
• /
• 2019

A copper tetracumylphenoxy phthalocyanine (CuPccp) thin film was formed on an organic insulator film by Langmuir-Blodgett (LB) deposition for gas sensor fabrication. To increase the reproducibility of film transfer, stearyl alcohol was used as a transfer promoter. The structural properties of the CuPccp layers were optically monitored through attenuated total reflection and polarization-modulated ellipsometry techniques. The average thickness of a single layer of the CuPccp LB film was measured to be 2.5 nm. Despite the role of the transfer promoter, the stability of the layer transfer was not sufficient to ensure homogeneity of the LB film. This was probably due to the presence of aggregates in the molecular structure of the CuPccp LB film. Nevertheless, copper phthalocyanine polymorphism can be greatly suppressed by the LB arrangement, which appears to contribute to the improvement of electrical conductivity. The p-type semiconductor characteristics were confirmed by Hall measurements from the CuPccp LB films.

• 전자공학회논문지 IE
• /
• 제43권4호
• /
• pp.99-104
• /
• 2006

전기 전자 소자를 제작하는 방법으로 Langmuir-Boldgett(LB)법이 많은 관심을 받고 있다. 수면위에 형성된 단분자막을 압축 또는 확장하면, 분자가 배향하는 과정에서 맥스웰 변위전류(MDC)가 흐른다. MDC는 전속밀도의 변화에 기인해서 흐르므로 MDC를 측정하는 것에 의해 분자의 동적 거동 관찰할 수 있다. 단분자막을 압축하는 속도와 분자면적은 서로 선형적인 관계를 갖고 있다. 본 연구에서는 압축속도를 30, 40, 50mm/min으로 달리하여 단분자막의 동적 거동을 관찰하였으며 LB법을 이용하여 Arachidic acid 단분자를 slide glass 위에 Y-type으로 9$\sim$21층의 다층막을 누적하여 Au/Arachidic acid/Al 소자를 제작하였다. 또한 Metal-Insulator-Metal(MIM) 소자의 I-V 특성을 측정하여 전극간의 거리가 커질수록 절연특성이 좋아짐을 확인하였다.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.137-146
• /
• 2006

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with fatty acid (8A5H) and phospholipid (DLPE, DMPC, and DPPA). LB films of 8A5H monolayer and 8A5H-phospholipid mixture were deposited using the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured using cyclic voltammetry with three-electrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0 mol/L) of $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate was 50, 100, 150 and 200 mV/s, respectively. As a result, LB films of fatty acid and phospholipid (8A5H/DLPE and DPPA) appeared irreversible process were caused by only the reduction current from the cyclic voltammogram and LB film of 8A5H-DMPC mixture was found to be caused by a reversible oxidation-reduction process.

• 한국응용과학기술학회지
• /
• 제19권2호
• /
• pp.73-78
• /
• 2002

The polyimide(PI) Langmuir-Blodgett(LB) ultra thin films were prepared by imidizing the PAAS LB films of PMDA and benzidine system with a thermal treatment at $250^{\circ}C$ for 30min, where the PAAS LB films were formed on substrates by using LB technique. The thicknesses of one layer of PAAS and PI LB film that deposited at the surface pressure of 27mN/m were 20.9 and 4A, respectively. At low electric field, ohmic conduction($I^{\propto}$ V) was observed and the calculated electrical conductivity was about $4.23{\times}10^{-15}{\sim}9.81{\times}10^{-15}S/cm$. The dielectric constant of LB film was about 7.0.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1722-1724
• /
• 1996

Enhancing the electrical conductivity of the ultrathin organic films is one of the important factors for the development of molecular electronic devices. The Langmuir-Blodgett(LB) technique has recently been attracted as out of the ways of deposition ultrathin films. We have studied manufacturing conditions and physical properties of Hexadecyl Dipyridinium-$(TCNQ^-)_2$ LB films made by Kuhn type apparatus. A ${\pi}-A$ isotherm shows that a limiting area is around $180{\AA}^2/molecule$ and a proper surface pressure for a deposition is around 22mN/m. A transfer ratio shows that Hexadecyl Dipyridinium-$(TCNQ^-)_2$ is able to be deposited as an Y-type. UV /visible absorption spectra shows that TCNQ dimer peak is apeared at about 600nm in LB films. In solution, $TCNQ^-$ peak is observed at about 400nm and charge transfer band at $830{\sim}900nm$. A horizontal conductivity of the Hexadecyl Dipyridinium-$(TCNQ^-)_2$ LB film is about $10^{-7}(S/cm)$.

• 한국응용과학기술학회지
• /
• 제32권4호
• /
• pp.789-794
• /
• 2015

스테아르산과 인지질혼합물의 농도변화에 띠르는 유기초박막에 대한 안정성을 조사하였다. 스테아르산과 인지질 혼합물 유기초박막은 ITO glass에 LB법을 사용하여 제막하였다. 전기화학적 특성은 $NaClO_4$ 용액에서 3 전극 시스템으로 순환전압전류법을 사용하여 초기 1650 mV에서 최종 퍼텐셜 -1350 mV 까지 측정하였다. 그 결과 스테아르산과 인지질의 혼합물 유기초막은 순환전압전류도표로부터 산화전류로 인한 비가역공정으로 나타났다. 스테아르산과 인지질혼합물 LB막(몰비 1:1, 1:2, 1:3)에서 확산계수(D)는 $0.01N\;NaClO_4$에서 각각 $1.4{\times}10^{-3}$, $1.7{\times}10^{-3}$ 및 $1.6{\times}10^{-3}(cm^2/s)$로 산출되었다.