• Korean Journal of Environmental Agriculture
• /
• v.41 no.4
• /
• pp.276-281
• /
• 2022

BACKGROUND: Plastics that are used in our daily lives largely end up in the environment. In agricultural environments, plastic wastes and microplastics can be found due to the uses and improper management of plastic products (e.g., vinyl greenhouses and mulching vinyl). Microplastics can also interact with contaminants in the agricultural environment. Therefore, this study was set to investigate the sorption characteristics of tetracycline, one of widely used antibiotics, on microplastics. METHODS AND RESULTS: The sorption tests were carried out with the tetracycline solutions (0-30 mg L^-1) and microplastic films prepared from low density polyethylene (LDPE) and polyvinyl chloride (PVC). The residual tetracycline concentrations were analyzed and fitted to the Freundlich and Langmuir isotherm models. The tetracycline sorption patterns on LDPE and PVC films were described better with the Freundlich isotherm model than the Langmuir isotherm model. The isotherm model parameters suggested that the maximum sorption amount of tetracyline was greater for PVC, while the sorption affinity was greater for LDPE. CONCLUSION(S): Different types of microplastics can have different sorption characteristics of tetracycline. Therefore, there is a need for continuous research on the interaction of various types and shapes of microplastics and contaminants in the environment.

• Clean Technology
• /
• v.7 no.2
• /
• pp.141-149
• /
• 2001

The effects of various factors such as adsorption temperature, interstitial velocity, species and concentration of adsorbates(benzene and toluene) and aspect ratio(L/D) on adsorption characteristics were investigated in a fixed bed with activated carbon. The breakthrough time in a fixed bed was decreased with the increasing of adsorption temperature, interstitial velocity and concentration of adsorbates. The interstitial velocity, concentration of adsorbates and adsorption temperature had influenced considerably upon the MTZ(mass transfer zone) and LUB(length of unused bed) obtained through the breakthrough curves, while aspect ratio(L/D) had smaller effect than former factors. Especially, the concentration of adsorbates among factors have the largest effect on MTZ and LUB. From comparison with the model isotherms, such as the Langmuir, Freundlich and Langmuir-Freundlich, the experimental isotherm data of benzene and toluene agreed farily well to three adsorption isotherm models.

• Journal of the Korean Chemical Society
• /
• v.61 no.5
• /
• pp.238-243
• /
• 2017

In this study, water treatment sludge carbonized with $400^{\circ}C$ was tested as an adsorbent for the removal of Pb and Cd in water. The carbonized sludge was characterized by thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray fluorescence spectrometry (XRF), and surface area analysis. Carbonized sludge exhibited much higher specific surface area and total pore volume than water treatment sludge itself. In batch-type adsorption process, carbonized sludge represented better adsorption performance for Pb than Cd, achieving 90~98% at the concentrations conducted in the experiments. Equilibrium data of adsorption were analyzed using the Freundlich and Langmuir isotherm models. It was seen that both Freundlich and Langmuir isotherms have correlation coefficient $R^2$ value larger than 0.95. The results of studies indicated that carbonized water treatment sludge by heat treatment could be used as an efficient adsorbent for the removal of Pb and Cd from water.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.629-636
• /
• 2003

The retardation of heavy metals in a mixture of fly ash and bentonite was studied as a potential barrier material for a landfill. Column tests were conducted using synthetic leachate having 100 mg/L and 50 mg/L of lead (Pb) and cadmium (Cd), respectively. Results indicated that the mixture had obvious retardation ability for heavy metals. To investigate the retardation factor caused by adsorption, batch adsorption tests were conducted at various concentrations. Test results were correlated with both Langmuir and Freundlich isotherms. The adsorption of the lead ion was applicable to the Langmuir isotherm and the adsorption of the cadmium ion was applicable to the Freundlich isotherm. In addition, based on experimental results, the migration characteristics of heavy metals through the bed of fly ash and bentonite mixture were investigated using the PHREEQC, a reactive transport model, under the real conditions of the landfill liner.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.661-666
• /
• 1998

Liquid phase adsorption equilibria of amines in an aqueous solution onto high silica zeolite pellets (HSZ), macroreticular resin particles (MR) and granular activated carbon (GAC) were determined using a batch bottle technique at 298K. The isotherm curves of HSZ-amines and GAC-amines indicate the nonlinear relationship of unfavorable adsorption type of HSZ-amines and favourable one of GAC-amines. However the curves of MR-amines represent the linear pattern of an adsorption isotherm. Among various equilibrium isotherms, the three parameters of the Redlich-Peterson equation and the two parameters of the Freundlich equation are found to be the most satisfactory within the range of this study. The two parameters of the Langmuir isotherm were not applicable to the present adsorption systems. The amines were adsorbed on the HSZ, MR and GAC in the following sequence of adsorptivity; aromatic amines > primary amines > secondary amines. The product of the Freundlich constants, k and n, proportionally increased with the boiling point, molar volume and dissociation constants of amines adsorbed on HSZ, MR and GAC.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.157-166
• /
• 1992

The biosorptlon perFormances of copper were Investigated by the immobilized biomass of nonliving marine brown algae Undaria pinnatifida by each of the Ca-alginate method(Ca-ALG), Ba-alginate method(Ba-ALG), polyethylene glycol method(PEG), and carrageenan method (CARR). The copper removal performance increased but the copper uptake decreased as the biomass amount was increased. However, the copper uptake by the immobilized biomass increased with increasing initial copper concentration. Among the immobilization methods, the copper uptake decreased in the following sequence: Ca-ALG > Ba-ALG > PEG > CARR. The pattern of copper uptake by the immobilized biomass fitted the Langmuir isotherm better than the Freundlich isotherm. Desorption of deposited copper with 0.05 ~0.5M HCI, resulted in no changes of the copper uptake capacity of the immobilized biomass by the immobilization methods except for PEG, through five subsequent biosorptioydesorption cycles. There was no damage to the immobilized biomass which retained its macroscopic appearance in repeated copper uptake/elution cycles.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.11
• /
• pp.31-37
• /
• 2011

This study investigated on the adsorption and photocatalysis of Reactive Black 5(RB5) by the hydroxyapatite(HAP)/Titanium dioxide($TiO_{2}$) media. The adsorption of RB5 on $TiO_{2}$, HAP and $TiO_{2}$/HAP was investigated during a series of batch adsorption experiments. The amounts adsorbed at equilibrium were measured. Langmuir and Freundlich isotherm models were tested for their applicability. The result of equilibrium studies of $TiO_{2}$, HAP and $TiO_{2}$/HAP adsorbent were found to follow Langmuir isotherm model. The adsorbed amounts(Qmax) were found to be 5.28mg/g on single $TiO_{2}$, 12.45mg/g on single HAP and 9.03mg/g on $TiO_{2}$/HAP, respectively. The experimental data were analysed using the pseudo-first-order adsorption and photocatalysis kinetic models. According to these models, RB5 degradation by $TiO_{2}$/HAP was affected by interaction effect of photocatalysis and adsorption.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.4
• /
• pp.453-459
• /
• 2014

The excessive concentration of phosphorus in the river and reservoir is a deteriorating factor for the eutrophication. The converter slag was used to remove the phosphate from the synthetic wastewater. Influencing factors were studied to remove soluble orthophosphate with the different particle sizes through the batch and the column experiments by continuous flow. Freundlich and Langmuir adsorption isotherm constants were obtained from batch experiments with $PS_A$ and $PS_B$. Freundlich isotherm was fitted better than Langmuir isotherm. Regression coefficient of Freundlich isotherm was 0.95 for $PS_A$ and 0.92 for $PS_B$, respectively. The adsorption kinetics from the batch experiment were revealed that bigger size of convert slag, $PS_A$ can be applied for the higher than 3.5 mg/L of phosphate concentration. The pilot plant of continuous flow was applied in order to evaluate the pH variation, breakthrough points and breakthrough adsorption capacity of phosphate. The variation of pH was decreased through the experimental hours. The breakthrough time was 1,432 and 312 hours to 10 mg/L and 50 mg/L for the influent concentration, respectively. The breakthrough adsorption capacity was 3.54 g/kg for 10 mg/L, and 1.72 g/kg for 50 mg/L as influent phosphate concentration.

• Journal of Wetlands Research
• /
• v.26 no.3
• /
• pp.272-278
• /
• 2024

Due to industrialization, a trace amount of residues of pharmaceuticals and personal hygiene products (PPCPs) flows into the ecosystem, polluting the ecosystem. In particular, it was intended to remove trace pollutants flowing into the effluent due to the increase in the amount of acetaminophen detected after COVID 19. To conduct this experiment, selected 6 media which are suitable for construcgted wetland and isothermal adsorption experiments. Langmuir equation and the Freundlich equation were used to calculate the maximum removal rate of acetaminophen. Among them, the Freundlich equation showed a higher result value of 0.9823. It was applied when forming constructed wetlands in urban areas to model the reduction rate of acetaminophen in wetlands.

• Analytical Science and Technology
• /
• v.13 no.4
• /
• pp.433-439
• /
• 2000

Adsorption behaviors of Ni(II) ions were investigated using amorphous alumina as adsorbent. In the adsorption kinetic study, it was observed that Ni(II) ions were bound to the alumina surface in two adsorption stages, the rapid and slow adsorption stages. The rapid adsorption proceeded within 1 hr, thereafter the slow adsorption occurred. The results of adsorption isotherm experiments showed that the Ni(II) adsorption obeyed the Langmuir-Freundlich isotherm, and that the adsorption enhanced with increasing pH. The change in ionic strength did not exhibit a conspicuous trend in Ni(II) adsorption, thereby suggesting that the adsorption occurs through surface complexation rather than electrostatic interactions. The amounts of adsorption were measured with varying pH at three different Ni(II) concentrations under the condition of constant ionic strength, showing that with increasing Ni(II) concentration, the percentage of adsorption decreased and the adsorption edge was shifted to a higher pH value.