• 전자공학회논문지C
• /
• 제34C권1호
• /
• pp.12-20
• /
• 1997

In this paper, we analyze the thermal deformation of mask frame assembly using finite element method(FEM) and predict the beam landing shift during tube operation. For realistic analysis, the apparent thermal conductivity and the apparent elastic modulus are calculated and the shadow mask is modeled as shell without aperatures. Also, all parts inside the tube are modeled and the each radiative effect is considered. Then the finite element analysis is performed for transient thermo-elastic deformation of the mask frame assembly and the beam landing shift is calculated. Experiments are eprformed for 17" cathode ray tube (CRT) to validate the FEM analysis. The temperatures of all parts inside the tube and beam landing shift on the panel are measured and the results are discussed in comparison with the results of the FEM analysis.ysis.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2297-2304
• /
• 2002

Two-dimensional and three-dimensional finite element methods have been used to analyze the deformation behavior of a shadow mask due to thermal and tension load. The shadow mask inside the Braun tube of a TV set has numerous slits through which the electron beams are guided to land on the designed phosphor of red, green or blue. Its thermal deformation therefore causes landing shift of the electron beam and results in decolorization of a screen. For the realistic finite element analysis, the effective thermal conductivity and the effective elastic modulus arc calculated, and then the shadow mask is modeled as shell without slits. Next a transient thermal analysis of the shadow mask is performed, wherein thermal radiation is a major heat transfer mechanism. Analysis of the resulting thermal deformation is followed, from which the landing shift of the electron beam is obtained. The present finite element scheme may be efficiently used to reduce thermal deformation of a shadow mask and in developing prototypes of a large screen flat TV.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.138-148
• /
• 1999

Thermal deformations of tension mask under localized heating are analyzed using finite element method and electron beam landing shifts are predicted by the analysis results. In CRT, electron beam landing shifts due to thermal deformations of the tension mask make the color purity of screen worse. In order to get the final results of thermal deformations, firstly the tension processes of the mask and following welding processes between the tensional mask and rail must be analyzed sequentially. And then, nonlinear transient thermo-elastic finite element analysis is performed on every part inside CRT including tension mask, wherein thermal radiation is a main heat transfer mechanism. Because the tension mask has numerous slits, the effective thermal conductivity and effective and effective elastic modulus is calculated, and the tension mask is modeled as a shell without slits. From the displacement results of tension mask, electron beam landing shifts is calculated directly. Experiments are performed to confirm our analysis results. Temperature distributions and beam landing shifts of tension mask are measured and the results are in good agreement with those of analyses.

• 대한기계학회논문집A
• /
• 제35권5호
• /
• pp.517-523
• /
• 2011

전방십자인대 부상은 스포츠 활동 중에 빈번하게 발생하며 주로 수술적 치료가 행해진다. 전방십자인대는 전내측과 후외측 다발로 구분되는데 주로 전내측 다발만 재건되는 한다발 재건술이시술되고 있다. 후외측 다발은 경골의 내회전을 복원하는데 효과적이라는 실험 결과가 보고된 바있지만 부상을 야기하는 역동적인 착지동작에서의 역할에 대한 연구가 필요하다. MRI 영상을 이용하여개발된 3차원 슬관절 모델에 인체실험 자료를 입력한 시뮬레이션으로 착지동작 시에 후외측 다발 및두다발 재건술이 얼마나 경골의 내회전을 제어하는지 알아보았다. 본 연구는 후외측 다발 방향의재건이 전내측 다발보다 착지동작 시에 경골 내회전을 효과적으로 감소시키며 두다발 재건술 또한슬관절 회전 안정성을 향상시킴을 밝혔다.

• 제어로봇시스템학회논문지
• /
• 제21권7호
• /
• pp.677-683
• /
• 2015

This paper proposes a helicopter direction adjustment system using barycenter shift. Most conventional methods for direction adjustment of uniaxial helicopters rely on the angle of inclination of the main rotor. However, the inherent burden of the bearing of the main rotor and serious abrasion of the helicopter using the above methods may results in loss of balance. To decrease abrasion and enhance the barycenter stability, the proposed method was used to shift the barycenter of the helicopter instead of the main rotor for direction adjustment. We set a biaxial ARM on a uniaxial helicopter to adjust the direction of ARM pointing as well as to realize stable direction control when the helicopter loses its balance. The method may enhance the landing safety of helicopters in emergencies. Uniaxial helicopters can be controlled under any environment by adjusting the motor parameters of the ARM which is dependent on the center of mass using neural network. The experiment results show that the helicopter can return to the starting position quickly under the external disturbance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.262-262
• /
• 2013

In surface chemistry area, many scientists studied the electrochemical reaction by changing work-function of metal; however, these methods had the weakness that it did not create the electric field. Unlike earlier studies, our capacitor-method makes a strong electric field in ice film. This electric field was induced by soft landing $Cs^+$ ions on ice film, and the strength was measured by the vibrational Stark shift of acetonitrile. In our system, the electric field strength is $10^9$ V/m and it is almost same in the electrochemical cell. This capacitor model provides new method to investigate the electrochemical reaction in vacuum system.

• 경영과학
• /
• 제29권3호
• /
• pp.183-192
• /
• 2012

For the past several decades, personnel scheduling and rostering problem has been one of the most popular research topics in optimization area. Among the numerous applications, airline (aviation) industry has been given most attention due to the economic scale and impact. Most of the literatures about the staff scheduling problem in airline industry are dealing with the air crew, pilots and flight attendances, and the rest of the literatures are about the ground staff, by whom cleaning, maintenance, fueling of aircraft and handling luggage are done from landing to taking off. None of the literatures found by the authors are dealing with the airline ground crew. In this paper roster of airline ground crew, who is responsible for issuing boarding pass, checking baggage, etc, is introduced, formulated and solved using CPLEX. Some expressions of the mathematical formulations, which are not suitable input format of the CPLEX, were transformed. Numerical examples are presented for the validation of proposed scheduling system.

• 한국항행학회논문지
• /
• 제15권6호
• /
• pp.994-999
• /
• 2011

본 논문에서는 기존 전자식 안테나분배장치(ADU)를 기계식 ADU로 개선한 사항을 설명한다. 기계식 ADU는 항공기가 착륙할 수 있도록 전파신호를 제공하는 활공각제공시설(Glide Path)의 신호를 안정화시켰으며, 장기간 사용 시 발생할 수 있는 위상변화 및 파워분배비율 변화의 문제점을 해결하였다. 그리고 개선된 ADU는 비행검사를 통해 안정성을 검증하였으며 현재 국내 외 공항에 설치되어 운영중이다.

• 전자공학회논문지B
• /
• 제31B권6호
• /
• pp.81-90
• /
• 1994

Finite element analysis is performed for transient thermal deformation of a shadow mask inside the Braun tube and the landing shift or mislanding of the electronic beam is calclated. The shadow mask has numerous slits through which the electronic beams are guided to land on the designed phosphor. Its thermal deformations therefore cause the mislanding of the electronic beam and result in decolorization of a screen. For realistic finite element analysis, firstly the effective thermal conductivity and the effective elastric modulus are calculated, and the shadow mask is modeled as shell without slits. Next the nonlinear finite element formulation is developed for transient heat transfer on the shadow mask, wherein thermal radiation is a major heat transfer mechanism. Analysis of the resulting thermoelastic deformations is followed, from which the mislanding of the electronic beam is obtained. The present finite element scheme may be efficiently used for thermal deformation design of a shadow mask.

• 소성∙가공
• /
• 제12권5호
• /
• pp.487-492
• /
• 2003

Tension variations with heat treatment in shadow mask for flat braun tubes are investigated in this study. In CRT, landing shift of the electron beam due to thermal deformation of the tension mask made the color purity of screen worse. In order to get the final results of thermal deformation, the tensile force within the mask and the welding processes between the rail and the extended mask have to be analysed sequentially. In this study, the effect of heat treatment is studied in terms of tension variations of shadow mask during its manufacturing process.