• 한국항공운항학회지
• /
• 제26권4호
• /
• pp.122-128
• /
• 2018

A compound drone that combines a fixed wing and a rotary wing is an aircraft that can take off and landing vertically, and can increase flight time and fly faster with fixed wings. The compound drones are divided into many types depending on the method of adding the thrust vectoring or the lift fan and the position of the rotor. In this study, we designed and fabricated a composite drone with four V-TOL motors in a fixed-wing, and assigned missions to the aviation body, hence judged mission accuracy using the actual flight test. The design process and the mission evaluation process employed in this study can be utilized on the development of various unmanned aerial vehicle.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.137-144
• /
• 2001

The major movement blocks of the container are the range between the apron and the designation points on yard in container terminals. The yard tractor drived by operator takes charge of it's movement in conventional container terminals. In automated container terminal, AGV(automatic guided vehicle) takes charge of a yard tractor's role and information of navigation path are ordered from upper control system. The automated container terminal facilities must have the docking system that guides landing zinc to execute high speed travelling and precision positioning. This paper describes the new docking method with the rotating LSB(laser slit beam) generator and two pair of photo receiver. The LSB generator is installed on the fixed ground and the photo receiver is implemented on the moving vehicle such as AGV. The proposed docking system is implemented to confirm it's function and accuracy. The accuracy of measured moving position is represented in ±5mm at 1 data sampling.

• 항공우주정책ㆍ법학회지
• /
• 제33권2호
• /
• pp.199-224
• /
• 2018

Aviation's safety record continues to improve yearly, especially with respect to passenger and crew injuries and deaths. However, although the number of accidents has decreased over the decades, there are still many events, such as landings short of the runway and runway excursions, both of which pose threats to passenger and crew safety. Surviving any kind of aviation accident depends on the physiological threat and stress of the impact(s), the extent to which the physical structure surrounding the passengers and crew remains intact, and the ability of the passengers and crew to be able to escape the wreckage. The one action that both passengers and crew can carry out to help decrease the likelihood of crash-related injury or death is to assume an emergency brace position. Doing so has been demonstrated over several decades to improve survivability. While cabin crew are taught (and then might have to teach passengers in an emergency about the emergency brace position), passengers in many parts of the world never learn about the brace position unless they are involved in an emergency in which there is time to prepare for the landing. This lack of provision of information is related to the fact that most airlines do not provide information in the preflight safety briefing and some do not even provide the information in the passenger safety cards. Many countries do not require their airlines to do so, a fact, which in turn, is related to the lack of mention of the brace position in ICAO's Annex 6. Until standards and recommended practices are changed at the highest world level, passengers will continue to be deprived of this vital, life-saving information that they can use, potentially to help save their own lives.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권4호
• /
• pp.203-211
• /
• 2016

A Satellite Based Augmentation System (SBAS) is a system that provides positioning information with high and accurate reliability to users who require ensuring high safety such as airplane taking off and landing. A continuous performance evaluation on navigation safety facilities shall be performed to determine whether developed systems meet the required performance before and after the operation. In this paper, SBAS position domain analysis is discussed in relation to analysis items for performance evaluation. The performance evaluation on the SBAS in the position domain shall conduct analysis on accuracy, integrity, continuity, and availability, which are items in the required navigation performance (RNP). In the paper, position domain analysis was conducted with regard to the Wide Area Augmentation System (WAAS) in the USA and the European Geostationary Navigation Overlay Service (EGNOS), which were developed already and now under operation. The analysis result showed that each of the systems satisfied the APV-I performance requirements recommended by the International Civil Aviation Organization (ICAO) with regard to daily data. It is necessary to verify using long-term data, whether the performance requirements in the RNP items are satisfied for system certification.

• 한국운동역학회지
• /
• 제14권1호
• /
• pp.27-40
• /
• 2004

The purpose of this study was to provide basic data for improving athletic performances by analyzing the kinematic variables of the Double Backward Somersault on the Parallel Bars through the 3D motion analysis. The subjects in this study were 5 male gymnasts who were ranked as national athletes. The results are as follows. 1. A total time(Mean Time) of performance showed $2.72{\pm}0.82\;sec$. and flight time to landing after releasing was 0.87sec.(mean). In order to perform better stable flying movement, the flight time should be increased. 2. In the change of velocity of the center of mass, when the increasing ascension velocity of the upper point was high, the position in the top point was high on releasing. 3. In the position variable of the center of mass, the mean of upper-bottom position in horizontal posture was $242.1{\pm}6.5cm$, $232.8{\pm}6.4cm$ in releasing, and $265.0{\pm}5.6cm$ in the highest point. This result is explained that the position of center of mass can be raised by using elastic power when wrist raised the bar in the releasing movement. 4. The angle of shoulder joint was $271.1{\pm}14.0$. Such a big angle influences a negative effect on the releasing velocity, because trunk is not a position in the enough vertical direction. 5. The ankle of hip joint in hand-standing was $191.1{\pm}5.9$, $118.8{\pm}5.3$ in releasing, and $122.3{\pm}5.3$ in taking on. Therefore, the result suggests that trunk should be straightly raised in taking on.

• 제어로봇시스템학회논문지
• /
• 제20권12호
• /
• pp.1181-1188
• /
• 2014

In this paper, we propose a novel concept foran unmanned delivery service using a cooperative heterogeneous unmanned system consisting of a self-driving car and an unmanned aerial vehicle (UAV). The proposed concept is suitable to deliver parcels in high-density and high-rise urban or residential areas. In order to achieve the proposed concept, we will develop acooperative heterogeneous unmanned system. Customers can order goods using a smartphone application and the order information, including the position of the customer and the order time, and the package is transported automatically by the unmanned systems. The system assigns the tasks suitable for each unmanned vehicle by analyzing it based on map information. Performance is validated by experiments consisting of autonomous driving and flight tests in a real environment. For more evaluation, the landing position error analysis is performed using circular error probability (CEP).

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.55-60
• /
• 2007

In contrast to the method in Part I, which is considered to be the general approach, Part II pursues a closed-form solution. However, this closed-form solution is available only in the 2D situation under the assumption that the moving object is restricted to a 2D space, and also requires the use of only two laser-slit sensors. Since the motion of the container loaded on top of an AGV is restricted to a plane parallel to the ground, it can be considered a 2D motion. As a simple method, but with a high cost, the use of a laser scanner is also discussed. Since the approach in Part I already uses three laser-slit sensors, it is desirable to use the schemes presented in Part II for supplementary purposes.

• 한국항공우주학회지
• /
• 제43권4호
• /
• pp.289-295
• /
• 2015

본 논문은 지상에서 단안 영상센서를 이용하여 항공기의 상대 위치를 측정하는 방법에 대하여 기술하는데, 알고 있는 항공기의 날개전폭과 카메라의 광학 파라미터를 이용하여 상대 거리 및 상대 위치를 측정하는 방법을 제시하였다. 또한 항공기 영상을 추출하기 위하여 차영상 기법을 이용하는 방법을 제시하였다. 이러한 기술은 ILS를 대신할 영상기반 자동착륙 시스템으로 이용될 수 있다. 상대 위치 및 거리 측정 성능을 검증하기 위하여 경비행기와 GPS를 이용하여 성능을 검증하였으며 1.85m의 평균제곱근 오차가 발생함을 확인하였다.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.1-6
• /
• 2013

Numerical optimization of two dimensional high lift configuration was performed with flow solver and optimization method based on RSM(Response Surface Model). Navier-Stokes solver with Spalart-Allmaras turbulence model was selected for the simulation of highly complex and separated flows on the flap. For the simultaneous optimization of both flap shape and setting (gap/overlap), 10 design variables (eight variables for flap shape variation and two variables for flap setting) were chosen. In order to generate the response surface model, 128 experimental points were selected for 10 design variables. The objective function considering maximum lift coefficient, lift to drag ratio and lift coefficient at specific angle of attack was selected to reduce flow separation on the flap surface. The present method was applied to two dimensional fowler flap in landing configuration. After applying the present method, it was shown that the optimized high lift configuration had less flow separation on the flap surface and lift to drag ratio was suppressed over entire angle of attack range.

• 항공우주시스템공학회지
• /
• 제8권2호
• /
• pp.40-48
• /
• 2014

In this paper, a prototype of GPS jammer localization system for precise landing is developed. The jammer localization system consists of the four jamming signal receivers for collecting RF signal, one central tracking station for estimating jammer position, and one monitoring station for displaying estimated position on the map. In order to estimate jammer location TDOA and AOA algorithm are introduced, and the function and design parameters of the developed prototype are proposed. CW, DSSS, Swept CW jamming signals were generated and used. From the results, it can be confirmed that developed system meets the performance goal.