• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.506-513
• /
• 2021

The durability and safety of reinforced concrete structures significantly depend on the reinforcement conditions, concrete cover thickness, cracks, and concrete strength. There are two ways to accurately determine the information on reinforcing bars embedded in concrete - the local destructive method and the non-destructive rebar detection test. In general, the non-destructive rebar detection tests, such as the electromagnetic wave radar method, electromagnetic induction method, and radiation method, are adopted to avoid damage to the structural elements. The moisture content and temperature of concrete affect the dielectric constant, which is the electrical property of concrete, and cause interference in the non-destructive rebar detection test results. Therefore, in this study, the effects of the electromagnetic wave radar method and electromagnetic induction method have been analyzed according to the temperature and surface moisture content of concrete. Due to the technological advancement and development of equipment, the average error rate was less than 5% in the specimens at 24℃, irrespective of their operating principles. Among the tested methods, the electromagnetic induction method showed very high accuracy. The electromagnetic wave radar method indicated a relatively small error rate in the dry state than in the wet state, and exhibited a relatively high error rate at high temperatures. It was confirmed that the error could be reduced by applying the electromagnetic wave radar method when the temperature of the probe was low and in a dry state, and by using the electromagnetic induction method when the probe was in a wet state or at a high temperature.

• Journal of Environmental Science International
• /
• v.18 no.5
• /
• pp.489-499
• /
• 2009

In an effort to examine the Regional Atmospheric Modeling System (RAMS ver. 4.3) to the initial meteorological input data, detailed observational data of NOAA satellite SST (Sea Surface Temperature) was employed. The NOAA satellite SST which is currently provided daily as a seven-day mean value with resolution of 0.1 $^{\circ}$ grid spacing was used instead of the climatologically derived monthly mean SST using in RAMS. In addition, the RAMS SST data must be changed new one because it was constructed in 1993. For more realistic initial meteorological fields, the NOAA satellite SST was incorporated into the RAMS-preprocess package named ISentropic Analysis package (ISAN). When the NOAA SST data was imposed to the initial condition of prognostic RAMS model, the resultant performance of near surface atmospheric fields was discussed and compared with that of default option of SST. We got the good results that the new SST data was made in a standard RAMS format and showed the detailed variation of SST. As the modeling grid became smaller, the SST differences of the NOAA SST run and the RAMS SST43 (default) run in diurnal variation were very minor but this research can apply to further study for the realistic SST situation and the development in predicting regional atmospheric field which imply the regional circulation due to differential surface heating between sea and land or climatological phenomenon.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.3
• /
• pp.94-101
• /
• 2008

Warming trends during winter seasons in East Asian regions are expected to accelerate in the future according to the climate projection by the Inter-governmental Panel on Climate Change (IPCC). Warmer winters may affect short-term cold hardiness of deciduous fruit trees, and yet phenological observations are scant compared to long-term climate records in the regions. Dormancy depth, which can be estimated by daily temperature, is expected to serve as a reasonable proxy for physiological tolerance of flowering buds to low temperature in winter. In order to delineate the geographical pattern of short-term cold hardiness in grapevines, a selected dormancy depth model was parameterized for "Campbell Early", the major cultivar in South Korea. Gridded data sets of daily maximum and minimum temperature with a 270m cell spacing ("High Definition Digital Temperature Map", HDDTM) were prepared for the current climatological normal year (1971-2000) based on observations at the 56 Korea Meteorological Administration (KMA) stations and a geospatial interpolation scheme for correcting land surface effects (e.g., land use, topography, and site elevation). To generate relevant datasets for climatological normal years in the future, we combined a 25km-resolution, 2011-2100 temperature projection dataset covering South Korea (under the auspices of the IPCC-SRES A2 scenario) with the 1971-2000 HD-DTM. The dormancy depth model was run with the gridded datasets to estimate geographical pattern of change in the cold-hardiness period (the number of days between endo- and forced dormancy release) across South Korea for the normal years (1971-2000, 2011-2040, 2041-2070, and 2071-2100). Results showed that the cold-hardiness zone with 60 days or longer cold-tolerant period would diminish from 58% of the total land area of South Korea in 1971-2000 to 40% in 2011-2040, 14% in 2041-2070, and less than 3% in 2071-2100. This method can be applied to other deciduous fruit trees for delineating geographical shift of cold-hardiness zone under the projected climate change in the future, thereby providing valuable information for adaptation strategy in fruit industry.

• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.409-431
• /
• 2014

In this study, the characteristics in the simulation of high-resolution coastal weather, i.e. sea surface wind (SSW) and significant wave height (SWH), were studied in a southeastern coastal region of Korea using the WRF and SWAN models. This analyses was performed based on the effects of various input factors in the WRF and SWAN model during M-Case (moderate days with average 1.8 m SWH and $8.4ms^{-1}$ SSW) and R-Case (rough days with average 3.4 m SWH and $13.0ms^{-1}$ SSW) according to the strength of SSW and SWH. The effects of topography (TP), land cover (LC), and sea surface temperature (SST) for the simulation of SSW with the WRF model were somewhat high on v-component winds along the coastline and the adjacent sea of a more detailed grid simulation (333 m) during R-Case. The LC effect was apparent in all grid simulations during both cases regardless of the strength of SSW, whereas the TP effect had shown a difference (decrease or increase) of wind speed according to the strength of SSW (M-Case or R-Case). In addition, the effects of monthly mean currents (CR) and deepwater design waves (DW) for the simulation of SWH with the SWAN model predicted good agreement with observed SWH during R-Case compared to the M-Case. For example, the effects of CR and DW contributed to the increase of SWH during R-Case regardless of grid resolution, whereas the differences (decrease or increase) of SWH occurred according to each effect (CR or DW) during M-Case.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.27-35
• /
• 2017

Human activity such as agriculture, industrial development and urban sprawl has been the major threat to wetlands ecosystem, which have caused the greatest losses of coastal wetlands. The Garorim bay provides one of the most important wetland habitate and Ministry of Oceans and Fisheries designated Garorim bay to marine ecosystem protected area in July 2016. The purpose of this research is to analysis the spatial pattern of Garorim bay using Landsat 5 (TM), Landsat 7 (ETM+), Landsat 8 (OLI & TIRS). The surface temperature and NDVI of Garorim bay were processed with spatial analysis method and time series analysis were applied to 25 years Landsat satellite 19 images. The results of time series distribution map compared with the several wetland habitate on remotely sensed images. Landsat images showed the change area of wetland vegetation distribution from 1988 to 2014. The southern part habitate of Garorim bay have been changed with vegetation patterns on coastal wetland which were covered with tidal flat.

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.103-115
• /
• 2018

The uncertainty of climate scenarios, as initial information, is one of the significant factors among uncertainties of climate change impacts and vulnerability assessments. In this sense, the quantification of the uncertainty of climate scenarios is essential to understanding these assessments of impacts and vulnerability for adaptation to climate change. Here we quantified the precision of surface temperature of ensemble scenarios (high resolution (1km) RCP4.5 and 8.5) provided by Korea Meteorological Administration, with spatiotemporal variation of the standard deviation of them. From 2021 to 2050, the annual increase rate of RCP8.5 was higher than that of RCP4.5 while the annual variation of RCP8.5 was lower than that of RCP4.5. The standard deviations of ensemble scenarios are higher in summer and winter, particularly in July and January, when the extreme weather events could occur. In general, the uncertainty of ensemble scenarios in summer were lower than those in winter. In spatial distribution, the standard deviation of ensemble scenarios in Seoul Metropolitan Area is relatively higher than other provinces, while that of Yeongnam area is lower than other provinces. In winter, the standard deviations of ensemble scenarios of RCP4.5 and 8.5 in January are higher than those of December. Especially, the standard deviation of ensemble scenarios is higher in the central regions including Gyeonggi, and Gangwon, where the mean surface temperature is lower than southern regions along with Chungbuk. Such differences in precisions of climate ensemble scenarios imply that those uncertainty information should be taken into account for the implementation of national climate change policy.

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.117-136
• /
• 2019

In this study, a hybrid-type of day fog detection algorithm (DFDA) was developed based on the optical and textural characteristics of fog top, using the Himawari-8 /Advanced Himawari Imager data. Supplementary data, such as temperatures of numerical weather prediction model and sea surface temperatures of operational sea surface temperature and sea ice analysis, were used for fog detection. And 10 minutes data from visibility meter from the Korea Meteorological Administration were used for a quantitative verification of the fog detection results. Normalized albedo of fog top was utilized to distinguish between fog and other objects such as clouds, land, and oceans. The normalized local standard deviation of the fog surface and temperature difference between fog top and air temperature were also assessed to separate the fog from low cloud. Initial threshold values (ITVs) for the fog detection elements were selected using hat-shaped threshold values through frequency distribution analysis of fog cases.And the ITVs were optimized through the iteration method in terms of maximization of POD and minimization of FAR. The visual inspection and a quantitative verification using a visibility meter showed that the DFDA successfully detected a wide range of fog. The quantitative verification in both training and verification cases, the average POD (FAR) was 0.75 (0.41) and 0.74 (0.46), respectively. However, sophistication of the threshold values of the detection elements, as well as utilization of other channel data are necessary as the fog detection levels vary for different fog cases(POD: 0.65-0.87, FAR: 0.30-0.53).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.68-84
• /
• 2020

This study analyzed the relationship between spatial characteristics and heat waves in the distribution area of the elderly population in Changwon, Gyeongsangnam-do. For analysis, the Statistics Census data, the Ministry of Environment land cover, Landsat 8 surface temperature, and the Meteorological Agency's heat wave days data were used. The spatial characteristics of the distribution of the elderly population was classified into 5 types through K-mean cluster analysis considering the land use types. The characteristics of the elderly population by spatial type were higher in the urbanized type(cluster-3), but the proportion of the elderly population was higher in the agricultural and forest area types(cluster-1, cluster-2). In the characteristics of the surface temperature and the heat wave days, the surface temperature was the highest in the urban area, but heat wave days were the highest in the rural area. As a result of analyzing the heat wave characteristics according to the spatial type of the distribution area of elderly population, cluster-2 with the largest area in agricultural areas was highest at 15.95 days, and cluster-3 with a large area in urbanized types was the lowest at 9.41 days and 9.18 days. In other words, the elderly population living in rural areas is more exposed to heat waves than the elderly population living in urban areas, and the damage is expected to increase. The results of this study could be used as basic data to prepare various policy measures for effective management and prevention of vulnerable areas in summer.

• Journal of the Korean earth science society
• /
• v.22 no.2
• /
• pp.138-146
• /
• 2001

The land cover over Korean peninsula was classified using a multi-temporal NOAA/AVHRR (Advanced Very High Resolution Radiometer) data. Four types of phenological data derived from the 10-day composited NDVI (Normalized Differences Vegetation Index), maximum and annual mean land surface temperature, and topographical data were used not only reducing the data volume but also increasing the accuracy of classification. Self organizing feature map (SOFM), a kind of neural network technique, was used for the clustering of satellite data. We used a decision tree for the classification of the clusters. When we compared the classification results with the time series of NDVI and some other available ground truth data, the urban, agricultural area, deciduous tree and evergreen tree were clearly classified.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.46-53
• /
• 2009

Urbanization brings several changes to the natural environment. Its consequences can have a direct effect on climatic features, as in the Urban Heat Island Effect. One factor that directly affects the urban climate is the green area. In urban areas, vegetation is suppressed in order to accommodate manmade buildings and streets. In this paper we analyze the effect of green areas on the urban temperature in Seoul. The period selected for analysis was July 30th, 2007. The ground temperature was measured using Landsat TM satellite imagery. Land cover was calculated in terms of city area, water, bare soil, wet lands, grass lands, forest, and farmland. We extracted the surface temperature using the Linear Regression Model. Then, we did a regression analysis between air temperature at the Automatic Weather Station and surface temperature. Finally, we calculated the temperature decrease area and the population benefits from the green areas. Consequently, we determined that a green area with a radius of 500m will have a temperature reduction area of $67.33km^2$, in terms of urban area. This is 11.12% of Seoul's metropolitan area and 18.09% of the Seoul urban area. We can assume that about 1,892,000 people would be affected by this green area's temperature reduction. Also, we randomly chose 50 places to analysis a cross section of temperature reduction area. Temperature differences between the boundaries of green and urban areas are an average of $0.78^{\circ}C$. The highest temperature difference is $1.7^{\circ}C$, and the lowest temperature difference is $0.3^{\circ}C$. This study has demonstrated that we can understand how green areas truly affect air temperature.