• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.2
• /
• pp.81-85
• /
• 1996

Tentative consolidation criteria, a kind of land suitability classification, was established for cultivated upland soils. The criteria were composed of systematically quantified individual soil properties such as physiography(relief), slope, available soil depth etc., and local features such as soil complexity, mapping unit separation, width/length ratio etc. The criteria was applied to upland soils in granite area, and sedimentary rock area. It was clear that the comparison of local features among candidated areas, and classification of suitability classes for land consolidation of upland soils was satisfactory for selection. The status of the areas classified to "Well suitable" were distributed on alluvial plains or less dissected rollings with lower complexity of soils occurred and extended acreage in each mapping unit. On the other hand, the areas classified as "Unsuitable" were distributed on the elongated narrow valleys with quite divided mapping units by paddy fields on the valley bottom.

• Korean Journal of Remote Sensing
• /
• v.32 no.2
• /
• pp.171-183
• /
• 2016

Land Surface Temperature (LST) retrieved from Landsat 8 measured from 2013 to 2014 and it is corrected by surface temperature observed from ground. LST maps are retrieved from Landsat 8 calculate using the linear regression function between raw Landsat 8 LST and ground surface temperature. Seasonal and annual LST maps developed an average LST from season to annual, respectively. While the higher LSTs distribute on the industrial and commercial area in urban, lower LSTs locate in surrounding rural, sea, river and high altitude mountain area over Seoul and surrounding area. In order to correct the LST, linear regression function calculate between Landsat 8 LST and ground surface temperature observed 3 Korea Meteorological Administration (KMA) synoptic stations (Seoul(ID: 108), Incheon(ID: 112) and Suwon(ID: 119)) on the Seoul and surrounding area. The slopes of regression function are 0.78 with all data and 0.88 with clear sky except 5 cloudy pixel data. And the original Landsat 8 LST have a correlation coefficient with 0.88 and Root Mean Square Error (RMSE) with $5.33^{\circ}C$. After LST correction, the LST have correlation coefficient with 0.98 and RMSE with $2.34^{\circ}C$ and the slope of regression equation improve the 0.95. Seasonal and annual LST maps represent from urban to rural area and from commercial to industrial region clearly. As a result, the Landsat 8 LST is more similar to the real state when corrected by surface temperature observed ground.

• The Korean Journal of Quaternary Research
• /
• v.1 no.1
• /
• pp.3-20
• /
• 1987

With regard to the Quaternary formations in the Korean Peninsula, very few studies have been done specially from a stratigraphic viewpoint. The alluvial sediments filling in the valleys have often been considered as the only formation of Quaternary age (more precisely of the Holocone) and so the Pleistocene was regarded as an erosional or nondepositional episode. This is apparently evident from a quick look at the general geological maps of the Peninsula, which show a lithological sequence of Mesozoic or Paleozoic substrata immediately overlain by Holocene alluvium. Likewise, the Pleistocene period was described in terms of unconformity in most local or regional stratigraphical successions of the Peninsula. Recently several different types of Quaternary formation, besides the so-called Holocene alluvium in the valley plain have been found around the Peninsula. They consist of coastal deposits, marine or fluviatile terrace deposits, ancient valley fill deposits or slope deposits. Some parts of the volcanic sediments in Jeju Is. are also known as the Quaternary sequence. Thus the Quaternary deposits in the Peninsula are far more developed than previously known to gelolgists. Moreover the importance of Quaternary research became recently apparent in Korea due to the shortage of raw materials and to the policy of an optimum land-use. Advanced constructions and land reclamation have required more precise engineering parameters of loose materials and an estimation of land stability. This does not imply only the engineering, or the structural properties of the loose material, but at the same time the basic study of the sediments from the stratigraphical and environmental viewpoints has been necessary. In this connection, Quaternary outcrops specially along the coastal fringe of the Peninsula have been mapped, profiled and sampled for sedimentological, clay-mineralogical and palaeomagnetic studies. All these results are compiled for the core of the Quaternary stratigraphy of the Peninsula.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.79-90
• /
• 2006

The partitioning level of a catchment becomes an issue if the calculated results from different levels show the same performance regardless of the levels. This study aims to identify the proper processing level of spatial resolution for the SWMM model application in an urban area. Using GIS overlaying technique, the division of subcatchments as a hydrologic similarity unit (HSU) is achieved with a comprehensive consideration of surface slope conditions, flow directions of storm sewers, and current land cover situation. Three surface-sewer alternatives are made on the basis of three different levels of surface divisions as well as the number of sewer connections and used as runoff simulation fields for the application of SWMM. As the result, it is found that the effect of a spatial resolution on the surface runoff results is not significant. On the other hand, the accumulated pollution load from an unit subcatchment, which is built by aggregation of several unit subcatchments consisting of various land cover conditions is reduced through the deterioration of surface spatial resolution. Although overall runoff pattern and accumulated runoff are little affected by spatial resolution, the simulated runoff from sewer outlet shows slight difference at the peak appearance time. The gap between surface pollution load accumulated and it discharged from the sewer outlet in a surface-sewer alternative during runoff period is monitored but the level of error is less than 5-10% except the lowest spatial resolution case.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.537-547
• /
• 2011

Electrical resistivity tomography surveys using boreholes were applied to reveal the cause of a catastrophic land subsidence accompanied by the excessive groundwater withdrawal in urban karst area and to map the connectivity of disseminated cavities over the study area. In order to understand the hydrogeological characteristics, resistivity using exsitu core samples, groundwater level for five boreholes, and hydraulic conductivity using slug test were measured. The hydraulic conductivity variation ranging from 0.8 to $9.3{\times}10^{-4}\;cm/s$ for five boreholes and a gentle slope of groundwater level indicated that there is no significant characteristics of hydraulic heterogeneity. Core samples of the lime-silicated rock were classified as three groups including cracked, weathered, and fresh and measured the resistivity values ranged from 103 to 161, 218 to 277, and 597 to 662 ohm-m, respectively. Drilling results that showed the cavity filled with clay materials and tomogram for this region indicated resistivity value lower than 50 ohm-m. From the inverted resistivity results for each section with five boreholes, cavity and fractured layer were distributed along the depth between 10 and 20 m overall area and cavities ranging from 4 to 6 m filled with clay materials.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.86-95
• /
• 2006

Brillouin backscatter is a type of reflection that occurs when light is shone into an optical fibre. Brillouin reflections are very sensitive to changes in the fibre arising from external effects, such as temperature, strain and pressure. We report here several case studies on the measurement of strain using Brillouin reflections. A mechanical bending test of an I beam, deployed with both fiber optic sensors and conventional strain gauge rosettes, was performed with the aim of evaluating: (1) the capability and technical limit of the DTSS technology for strain profile sensing; (2) the reliability of strain measurement using fiber optic sensor. The average values of strains obtained from both DTSS and strain gauges (corresponding to the deflection of I beam) showed a linear relationship and an excellent one-to-one match. A practical application of DTSS technology as an early warning system for land sliding or subsidence was examined through a field test at a hillside. Extremely strong, lightweight, rugged, survivable tight-buffered cables, designed for optimal strain transfer to the fibre, were used and clamped on the subsurface at a depth of about 50cm. It was proved that DTSS measurements could detect the exact position and the progress of strain changes induced by land sliding and subsidence. We also carried out the first ever distributed dynamic strain measurement (10Hz) on the Korean Train eXpress(KTX) railway track in Daejeon, Korea. The aim was to analyse the integrity of a section of track that had recently been repaired. The Sensornet DTSS was used to monitor this 85m section of track while a KTX train passed over. In the repaired section the strain increases to levels of 90 microstrain, whereas in the section of regular track the strain is in the region of 30-50 microstrain. The results were excellent since they demonstrate that the DTSS is able to measure small, dynamic changes in strain in rails during normal operating conditions. The current 10km range of the DTSS creates a potential to monitor the integrity of large lengths of track, and especially higher risk sections such as bridges, repaired track and areas at risk of subsidence.

• Ecology and Resilient Infrastructure
• /
• v.7 no.3
• /
• pp.181-188
• /
• 2020

In this study, a temperature distribution sensing method using optical fiber was applied to a large-scale levee experiment, and the applicability of wide-area levee or embankment monitoring technology to observe the changes inside the levee was reviewed. The optical fiber was buried in a large-scale levee, and the temporal and spatial temperature changes were measured according to the water level changes in the reservoir. As the water level of the reservoir increased, the temperature of the embankment slope decreased, and as the infiltration progressed, a change in the spatial location of the temperature change was detected. The temperature change due to embankment infiltration varied depending on the time of the infiltration progress, and the change assumed to be the seepage line could be observed. This study has demonstrated that information about temperature changes inside the levee can be interpreted as the information on the locations that are judged to be relatively vulnerable, investigating the changes in the condition inside the levee.

• Journal of Korean Society of Forest Science
• /
• v.101 no.4
• /
• pp.574-578
• /
• 2012

This study was carried out to clarify the influences of forest environmental factors on turbidity of Stream water on three stands (Castanea crenata, Pinus densiflora and Plantation Land) of small watershed in Samgyeri Naedong-myeon Jinju-si Gyeongsangnam-do. The relationship between turbidity and forest environmental factors was a positive correlation at 1% level with chromaticity, suspended solid, sediment runoff erosion, slope, rainfall intensity, preceding dry days, watershed area and stream length and at 5% level with accumulative rainfall. The important factors that affected turbidity in small watershed showed in order of preceding dry days, rainfall intensity, stream length, chromaticity and suspended solid. In the stepwise regression between turbidity and forest environmental factors, the estimation equation is as follow; Y=-28.125+0.047x (suspended solid)+0.058x (chromaticity)+1.518x (rainfall intensity)+0.264x (stream length)+1.837x (preceding dry days). The results indicates that dangerous areas of landslide and soil runoff by land use could be applied to the mitigation measures such as afforestation, erosion check dam and revetment for erosion control and water quality management in small watershed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1011-1021
• /
• 2016

This study performs the potential flood hazard analysis by applying elevation data, soil data and land use data. The susceptibility maps linked to elevation, soil and land use are combined to develop the new types of flood hazard map such as runoff production map and runoff accumulation map. For the development of the runoff production map, land use, soil thickness, permeability, soil erosion and slope data are used as runoff indices. For the runoff accumulation map, elevation, knick point and lowland analysis data are used. To derive an integrated type of flood potential hazard, a TOPSIS (The Technique for Order of Preference by Similarity to Ideal Solution) technique, which is widely applied in MCDM (Multi-Criteria Decision Making) process, is adopted. The indices applied to the runoff production and accumulation maps are considered as criteria, and the cells of analysis area are considered as alternatives for TOPSIS technique. The model is applied to Gamcheon watershed to evaluate the flood potential hazards. Validation with large scale data shows the good agreements between historical data and runoff accumulation data. The analysis procedure presented in this study will contribute to make preliminary flood hazard map for the public information and for finding flood mitigation measures in the watershed.

• Economic and Environmental Geology
• /
• v.37 no.2
• /
• pp.207-223
• /
• 2004

The purpose of this study is to reveal spatial relationships between landslide and geospatial data set, to map the landslide susceptibility using the relationship and to verify the landslide susceptibility using the landslide occurrence data in Boun area in 1998. Landslide locations were detected from aerial photography and field survey, and then topography, soil, forest, and land cover data set were constructed as a spatial database using GIS. Various spatial parameters were used as the landslide occurrence factors. They are slope, aspect, curvature and type of topography, texture, material, drainage and effective thickness of soil. type, age, diameter and density of wood, lithology, distance from lineament and land cover. To calculate the relationship between landslides and geospatial database, Bayesian probability methods, weight of evidence. were applied and the contrast value that is >$W^{+}$->$W^{-}$ were calculated. The landslide susceptibility index was calculated by summation of the contrast value and the landslide susceptibility maps were generated using the index. The landslide susceptibility map can be used to reduce associated hazards, and to plan land cover and construction.