• 농촌계획
• /
• 제25권3호
• /
• pp.37-44
• /
• 2019

The value of Jeju Batdam has been reexamined as it is listed as a nationally important agricultural heritage and globally important agricultural heritage systems. However, it is already exposed to threats such as reduction of agricultural population and cultivation area. Despite efforts like the agricultural heritage system to preserve traditional agriculture, there is few basic investigation into the current status of Jeju Batdam. The purpose of this study is to estimate the length of Jeju Batdam. We used the continuous cadastral map of Jeju area to extract the boundaries of the field lot. In the cadastral map, the farmland was selected by selecting dry fields, paddy fields and orchards. 300 sample site were selected from the extracted farmland, and the boundaries between the Internet map and the parcels were superimposed and the differences were confirmed on the drawing. After that, field survey was conducted to confirm the boundary of the parcels and the existence of actual Batdam. It is estimated that the length estimated from this study is at least 23,983km and maximum 142,353km, which is at least 1,830km longer than 22,108km announced in 2007. Since Jeju Batdam is based on land parcel boundary, it is an objective and efficient method to utilize intellectual information. In addition, because it is subordinate to farmland, new information can be extracted reflecting the change of land use and make the spatial database based on the cadastral maps.

• 한국농공학회지
• /
• 제23권2호
• /
• pp.61-69
• /
• 1981

The paddies in the hillsides in Gonggeun-myeon, Hoingseong-gun, Kangweon-do keep a steep slope and run in and out. A land consolidation in such an area, therefore, will require high ratio of land loss and a large amount of earth moving if it follows the existing design criteria to separate drainage and irrigation ditches in a scheme. Due to the consequent decrease in construction cost, the project has not been envisaged. in order to secure the introduction of small-medium size farm machineries into the paddies, farm plots were planned to be straight and drainage with taking care of topography. Findings from the comparison of methodologies are as follows. 1. In places with a solpe of more than 1/30, a reduction in earth moving can be expected with parallel plots to the contours. 2, For the sake of effective using of farm machineries, it is thought that a plot should be running straight parallel to the contours and the ratio of length and width of a plot be more than six. 3. In places with a slop of more than 1/10, a reduction in earth moving and a effective introduction of farm-machineries can he expected with straight parllel plots to the contours. But it is undesirable to introduce a scheme in this places because of the difficulties in acreage computation and farmers' hesitation. 4. The system with a canal for both irrigation and drainage is highly effective to decrease the ratio of land loss as well as construction cost. 5. Parallel plots to the contours and a canal for both irrigation and drainage are highly effective in the decrease in construct cost. 6. To avoid the subdivision of a cooperation in farming is desirable of a plots, has more than two owners.

• 한국전문물리치료학회지
• /
• 제13권4호
• /
• pp.79-86
• /
• 2006

The purpose of the current experiment was to describe interlimb coordination when swing limb conditions are being manipulated by constraining step length or by adding a 5 or 10 pound weight to the swing limb distally. Subjects were asked to begin walking with the right limb to land on the primary target (normal step length) that is 10 cm in diameter. However, if, during movement, the light was illuminated, then the subject had to step on one of the secondary targets (long and short step length). These three step length conditions were repeated while wearing a 5 pound ankle weight and then when wearing a 10 pound ankle weight. Ground reaction force (GRF) data indicated that there were changes in the forces and slopes of the swing and stance Fx GRFs. Long stepping subjects had to increase the propulsive force required to increase step length. Consequently, swing and stance toe-off greatly increased in the long step length condition. Short step length subjects had to adequately adjust step length, which decreased the speed of gait initiation. Loading the swing limb decreased the force and slope of the swing limb. Swing and stance toe-off was longest for the long step length condition, but there was a small difference of temporal events between no weight and weight condition. It appears that subjects modulated GRFs and temporal events differently to achieve the peak acceleration force of the swing and stance limb in response to different tasks. The findings from the current study provide preliminary data, which can be used to further investigate how we modulate forces during voluntary movement from a quiet stance. This information may be important if we are to use this or a similar task to evaluate gait patterns of the elderly and patient populations.

• 한국대기환경학회지
• /
• 제31권1호
• /
• pp.1-14
• /
• 2015

This study investigates the impact of enhanced regional meteorological fields on improvement of wind energy forecasting accuracy in the southwestern coast of the Korean Peninsula. To clarify the effect of detailed surface boundary data and application of analysis nudging technique on simulated meteorological fields, several WRF simulations were carried out. Case_LT, which is a simulation with high resolution terrain height and land use data, shows the most remarkable accuracy improvement along the shoreline mainly due to modified surface characteristics such as albedo, roughness length and thermal inertia. Case_RS with high resolution SST data shows accurate SST distributions compared to observation data, and they led to change in land and sea breeze circulation. Case_GN, grid nudging applied simulation, also shows changed temperature and wind fields. Especially, the application of grid nudging dominantly influences on the change of horizontal wind components in comparison with vertical wind component.

• The Korean Journal of Ecology
• /
• 제14권3호
• /
• pp.327-343
• /
• 1991

Clonal growth and rhizome architecture of calmagrostis epigeios, were studied in a 15-year old coastal reclamed land. As c. epigeios patch grew from center to margin radially over time, concentric annuli were added. the radial increases of the mature patch were 80~130cm/yr. the patch ages of c. epigeios estimated by relationships between the diameter and is radial increament, were 1~6year old. There were the marked variations of density, phytomass, shoot height and inflorecence frequency with increasing age of rhizome system within the patch. the maximum performance occurred at 2-year-old concentric annuli of the patch. The growth phasic continuum with aging was divided into 5 grwth phases ; pioneer, building, matyre, senile and degenerate. The rhizome aging had a more significant effect on the inflorescence frequency than on the other attributes. new rhizomes tended to diverge from the direction of the parent ramet by sympodial growth. in a 1-year-old patch, average length of rhizome segment was 7cm, average number of internode was 6, and the tillering frequency was 27%. The tillering in the early stage resultd in the increase of shoot density and the producation of multibranching rhizome. as the result of that, circular patchwas formed in a year. The branching structure based on such facts was represented graphically in branching degree of 60 and 100. therefore, c. epigeios with clonal growth may establish and grow vigorously earlier than other glycophytes in high salt conditions such as the coastal reclaimed land.

• 한국측량학회지
• /
• 제31권6_2호
• /
• pp.521-527
• /
• 2013

Rule set is an important step which impacts significantly on accuracy of object-oriented classification result. Therefore, this paper proposes a rule set to extract land cover from Landsat Thematic Mapper (TM) imagery acquired in Donganh, Hanoi, Vietnam. The rules were generated to distinguish five classes, namely river, pond, residential areas, vegetation and paddy. These classes were classified not only based on spectral characteristics of features, but also indices of water, soil, vegetation, and urban. The study selected five indices, including largest difference index max.diff; length/width; hue, saturation and intensity (HSI); normalized difference vegetation index (NDVI) and ratio vegetation index (RVI) based on membership functions of objects. Overall accuracy of classification result is 0.84% as the rule set is used in classification process.

• Journal of Biosystems Engineering
• /
• 제21권3호
• /
• pp.343-356
• /
• 1996

The plot geometry of the paddy land is directly related to the performance of machines, especially those having a large size and high speed. The study was to investigate the optimum plot geometry from the standpoint of mechanization. A simulator, Field-Plot-Structure-Evaluation-System(FPSES) was developed for evaluation of the field performance of machines according to the plot geometry. The efficiency and capacity of different sizes of machinery used for rice farming functions were analyzed for a various combination of plot geometry, which could be used as reference for the land reclamation planning and mechanization programming. It is shown that the plot size of about two hectares having a length of 200m and width of loom may be optimum, considering the efficiency and capacity of large sized machinery available currently and in near future.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.181-186
• /
• 1999

For an unmanned machining system, the control and disposal of chips is one of the most serious problems at present. In order to perform chip control, feed/land length($F_L$) was introduced, and using this parameter, the cutting performance and chip breaking characteristics of groove-type and the land -angle-type chip formers were assessed. The specific cutting energy consumed and the shape of broken chips with its breaking cycle time were evaluated to find out the ranges of $F_L$ value where efficient cutting and effective chip breaking could be achieved. The C type chip was found to be the most preferable from the view point of cutting efficiency.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.49-52
• /
• 1997

The kinematically admissible velocity field is developed for the analysis of the curving of an eccentric extrusion. The curving of product in extrusion is caused by the difference of the linearly distributed longitudinal velocity on the cross-section of the workpiece at the dies exit. The result of the analysis show that the curvature of product increases with the increase in eccentricity of gravity center of the cross-section of the workpiece at the die entrance from that of the cross-section at the die exit. It also increase with the die land dimension. By the DEFORMTM-3D analysis, the curving of T-shaped product in extrusion is changed by the eccentricity, die land length and the friction constant. The result of the analysis by DEFORMTM-3D software shows that the curvature of circular shaped product increases with the eccentricity. The two analysis and one experiment show the curving phenomenon in eccentric extrusion process.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.67-73
• /
• 2007

Anhui Province, with a total north-south length of 570km and an east-west width of 450km and a total area of 139.6 thousand km2, accounts for 1.45% of China's total area. The landform and land feature of Anhui Province is diverse, and generally it can be divided into 5 natural regions: (1) Huaibei Plain; (2) Jianghuai Hillocks; (3) Dabie Mountains in the West of Anhui Province; (4) Yanjiang Plain, (5) Mountain Area of southern Anhui Province. Anhui Province is located in the transitional zone of warm and humid zone and subtropical zone, and its mean annual precipitation is 800-1800mm. The province, which has diverse climate, multiple land forms and many rivers and lakes, passes three basins (Huaihe River, Yangtze River and Xin'an River) and has large differences in the time distribution and regional distribution of water resource. Therefore, the development and usage conditions of the water resource in different regions are different.