• Imaging Science in Dentistry
• /
• v.35 no.1
• /
• pp.51-54
• /
• 2005

Purpose : To acquire the useful diagnostic information through the analysis of the clinical and radiological characteristics of mandibular odontogenic keratocyst. Materials and Methods : The researchers compared and analysed the clinical and radiological features of 112 cases of mandibular odontogenic keratocyst confirmed by histopathlogic examination. Results : Mandibular odontogenic keratocysts occurred more frequently in males than in females and the incidence is the highest in the 2nd and 3rd decades. These cysts occurred in the mandibular posterior area, angle-ramus area and anterior area $51.8\%$, $31.2\%$ and $17.0\%$ respectively. These cysts had undulating border ($69.6\%$) rather than smooth border ($30.4\%$). Most of these cysts had well-defined hyperostotic border ($94.6\%$). These cysts caused cortical thinning or expansion ($78.6\%$) rather than no cortical reaction ($21.4\%$). Loss of lamina dura was observed in $72.3\%$, displacement of tooth appeared in $35.7\%$ and root resolution appeared in $12.5\%$ of cases. In $71\%$ of cases, displacement of mandibular canal was observed. Internal patterns of lesional radiolucency were even ($61.6\%$) or uneven ($38.4\%$). Conclusion : These results would be helpful in diagnosing of mandibular odontogenic keratocyst. (Korean J Oral Maxillofac Radiol 2005; 35 : 51-4)

• Journal of Korean Neurosurgical Society
• /
• v.51 no.5
• /
• pp.247-252
• /
• 2012

Objective : The anatomical knowledge is the most important and has a direct link with success of operation in cervical spine surgery. The authors measured various cervical parameters in cadaveric dry bones and compared with previous reported results. Methods : We made 255 dry bones age from 19 to 72 years (mean, 42.3 years) that were obtained from 51 subjects in 100 subjects who donated their bodies. All measurements from C3-C7 levels were made using digital vernier calipers, standard goniometer, and self-made fix tool for two different cervical axes (canal and disc setting). We classified into 4 groups (uncinate process, vertebral body, lamina, and pedicle) and measured independently by two neurosurgeons for 28 parameters. Results : We analyzed 23970 measurements by mean value and standard deviations. In comparing with previous literatures, there are some different results. The mean values for uncinate process (UP) width ranged from 5.5 mm at C4 and 5 to 6.3 mm at C3 and C7 in men. Also, in women, the mean values for UP width ranged from 5.5 mm at C5 to 6.3 mm at C7. C7 was widest and C5 was most narrow than other levels. The antero-posterior length of UP tended to increase gradually from C3 to C6. The tip way, tip distance, and base distance of UP also showed increasing pattern from C3 to C7. Conclusion : These measurements can provide the spinal surgeons with a starting point to address bony architectures surrounding targeted soft tissues for safeguard against unintended damages during cervical operation.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.76-85
• /
• 2014

In this paper, the equivalent coefficient of thermal expansion (CTE) of fiber reinforced plastic composite material is investigated with various CTE prediction schemes. Although there are several methods for predicting the equivalent CTEs, most of them have some limitations of are not much accurate when comparing prediction results with test results. In the framework of computational homogenization, a representative volume element is taken from the predefined fiber-volume ratio, and modelled with finite element mesh. Finally, the equivalent CTEs are obtained by applying periodic boundary condition. To verify the performance of the proposed method, the results obtained are compared with those by the existing methods and test results. Additionally, the thermal pointing error analysis for star tracker support structure is conducted and its accuracy is estimated according to CTE prediction schemes.

• Korean Journal of Veterinary Research
• /
• v.28 no.1
• /
• pp.137-143
• /
• 1988

In the course of studying porcine enterovirus infection in piglets, the vascular endothelial cells in the CNS of colostrum-deprived piglets with polioence-phalomyelitis were investigated by electron microscope. The experimental piglets were orally infected with the porcine enterovirus serogroup 3 isolated in Korea and necropsied at 7 days postinoculation. Crystalline arrays of viral particles were found in the vascular endothelial cells of the spinal cord and cerebellum. Aggregates of immature viral particles were occasionally observed in the vascular endothelial cells in the meninges. The rough ER was deprived of ribosomes, irregularly dilated and associated with viral crystals, There were abundant cytoplasmic filaments, dilatation of perivascular space, perivascular cuffing, and the partial distruptions of endothelial cell membrane and basal lamina.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.5
• /
• pp.685-695
• /
• 2011

Satellite cells are skeletal muscle progenitor/stem cells that reside between the basal lamina and plasma membranes of skeletal fibers in vivo. These cells can give rise to both myogenic and adipogenic cells. Given the possible role for differentiation of satellite cells into adipocytes in marbling and in some pathological disorders like sarcopenia, knowledge of the proteins involved in such process remains obscure. Using two-dimensional polyacrylamide gel electrophoresis coupled with mass spectrometry, we investigated the proteins that are differentially expressed during adipogenic differentiation of satellite cells from bovine longissimus muscle. Our proteome mapping strategy to identify the differentially expressed intracellular proteins during adipogenic differentiation revealed a total of 25 different proteins. The proteins up-regulated during adipogenic differentiation of satellite cells like Cathepsin H precursor, Retinal dehydrogenase 1, Enoyl-CoA hydratase, Ubiquinol-cytochrome-c reductase, T-complex protein 1 subunit beta and ATP synthase D chain were found to be associated with lipid metabolism. The down-regulated proteins like LIM protein, annexin proteins, cofilin-1, Rho GDP-dissociation inhibitor 1 and septin-2, identified in the present study were found to be associated with myogenesis. These results clearly demonstrate that the adipogenic conversion of muscle satellite cells is associated with the up-regulated and down-regulated proteins involved in adipogenesis and myogenesis respectively.

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.73-80
• /
• 2001

This study was carried out to investigate the strength and technical feasibility of arch type laminated lumber from the domestic small lumbers(Pinus densiflora S. et Z. and Larix kampferi Catt.). Arch type lumbers manufactured with different compositions of laminae. It was designed to improve the strength and stiffness. Strength S. rt Z. U;timate load Carr. laminated lumbers were higher than that of the Pinus densiflora S. et Z. Ultimate load of 7-ply laminated lumbers were 2 times higher than the 5-ply laminated lumbers. The strength of finger jointed lumbers were found to be about 15.8% less than that of the no joint lumber. One solution for this problem is to use veneer as face lamina. The veneer laminated lumbers was considerably greater than that of the non-veneer laminated lumbers. It was suggested that this small lumber may be a candidate for high valued product member to provide the proper combination of laminae.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.5
• /
• pp.435-439
• /
• 2011

Ameloblastoma is an aggressive benign odontogenic epithelial tumour that may arise from the enamel organ, remnants of dental lamina, or the lining of an odontogenic cyst. It is usually categorized into solid or multicystic, unicystic, and peripheral types. Treatment ofameloblastomas include conservative methods such as marsupialisation, enucleation, and curettage; and radical treatments such as marginal or segmental resection. Radical treatments have resulted in lower recurrence rates; however, may also encounter esthetic, functional, and reconstructive problems. Unicystic ameloblastoma has been considered less aggressive and a lower recurrence tendency. Thus, many authors have recommended conservative treatment in cases of unicystic ameloblastoma. An 11 year-old boy presented with displaced second and third molars by luminal unicystic ameloblastoma in the mandible. Cyst enucleation, curettage, and third molar extraction were done. No signs of recurrence or esthetic problems such as facial asymmetry were seen radiologically and clinically, up to 8 years 2 months postoperatively.

• Korean Journal of Ichthyology
• /
• v.17 no.4
• /
• pp.241-247
• /
• 2005

To observe the respiratory system in relation to the air-breathing organ in Iksookimia longicorpa, micro-anatomical investigation was performed on the epidermis and on intestinal tract fragments. The epidermis was distinguished by two types of skin glands, a small mucous cell and a large club cell. The mucous cell was acid sulfomucins (some sialomucins), but the club cell did not give any histochemical tests for mucosubstances. The presence of a well defined lymphatic system with small lymphocytes was established in the stratum germinativum layer of the epidermis. A large number of blood capillaries run very close to each other just below the basement membrane. The straight intestinal tract is divided into an intestine and rectum, which consisted of a mucosa (epithelial layer), lamina propria-submucosa, muscularis, and serosa. The intestine and rectum have shorter mucosal folds and a thinner wall. The majority of the epithelial mucous cells contain acid sulfomucines. Based on the above results, I. longicorpa adapts to poor dissolved oxygen conditions by using an additional respiratory system using air through the epidermis, not the intestines.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.409-418
• /
• 2017

This work attempted to manufacture glued-laminated timber (Glulam) bonded with melamine-urea-formaldehyde (MUF) resin adhesives at various melamine contents from 20% to 50% under high frequency (HF) heating for a very short time. Two preparation methods were employed to prepare MUF resin adhesives with different melamine contents: one-batch method of synthesizing MUF resins in a single batch, and two-batch method of mixing urea-formaldehyde (UF) resin with melamine-formaldehyde (MF) resin that had been synthesized separately. As the melamine content increased, the gelation time and peak temperature of MUF resins decreased. The adhesion performance of plywood showed that the one-batch MUF resin adhesive with 50% melamine content only satisfied the standard requirement of water resistance. Thus, the one-batch MUF resin adhesive with 50% melamine content was applied for bonding wood lamina from four softwood species such as Japanese larch, Korean red pine, Korean pine and Japanese cedar to manufacture Glulam under HF heating. All Glulam samples bonded with the one-batch MUF resin adhesives with 50% melamine content except those from Korean Red Pine satisfied the requirement in water soaking or boiling water delamination test as an exterior grade Glulam. The presence of rosin in Korean Red Pine was believed to be responsible for its poor adhesion. These results showed that the one-batch MUF resin adhesives with 50% melamine content provided acceptable water resistance with exterior grade Glulam manufactured under HF heating.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.67-74
• /
• 2016

The yield shear strength of bolt connection in glass fiber reinforced glulam was predicted using a design-based equation, and was compared to the empirical yield shear strength. For the predicted equation, the mechanical properties of member (the elastic modulus, Poisson's ratio, shear modulus) was tested. The fracture toughness factor ($K_{ft}$) of glass fiber reinforced glulam was reflected to the revision of the design equation of bolted connection. The compressive strength properties to grain direction was influenced by annual ring angle and width of lamina. Compared with the revised yield shear strength of reinforced glulam, it was tended to be similar to the empirical yield shear strength on the diameter of bolt and the reinforcements. The revised yield shear strength from proposed formula of KBC was most appropriately matched in the bolt connection of the glass fiber reinforced glulam.