• Journal of information and communication convergence engineering
• /
• 제13권4호
• /
• pp.235-240
• /
• 2015

A decimation chain for multi-standard reconfigurable radios is presented for 900-MHz and 1,900-MHz dual-band cellular standards with a data interpolator based on the Lagrange method for adjusting the variable data rate to a fixed data rate appropriate for each standard. The two proposed configurations are analyzed and compared to provide insight into aliasing and the signal bandwidth by means of a newly introduced measure called interpolation error. The average interpolation error is reduced as the ratio of the sampling frequency to the signal BW is increased. The decimation chain and the multi-rate analog-to-digital converter are simulated to compute the interpolation error and the output signal-to-noise ratio. Further, a method to operate the above-mentioned chain under a compressed mode of operation is proposed in order to guarantee continuous packet connectivity for inter-radio-access technologies. The presented decimation chain can be applied to LTE, WCDMA, GSM multi-mode multi-band digital front-end which will ultimately lead to the software-defined radio.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.459-463
• /
• 1997

In this paper, we present the elimination of ECG artifact from the polysomnographic EEG and EOG. The idea of this method is that the ECG synchronized EEG segment is detected from ECG and regard samples of that segment a missing signal. After this, we used two interpolation methods to recover the missing segment. One is the Lagrange Polynomial Interpolation Method and the other is the Least Square Error AR Interpolation method. We tested those methods by applying to simulated signals. AR methods works well enough to reject the artifact about 10% of the main artifact level. We practically applied to real EEG and EOG signals. We also developed the algorithm to detect whether the artifact level is high or not. If the artifact level is high, then the interpolations are applied.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권4호
• /
• pp.155-161
• /
• 2014

The purpose of this study is to develop precise point positioning (PPP) algorithms based on GLONASS code-pseudorange, verify their performance and present their utility. As the basic correction models of PPP, we applied Inter Frequency Bias (IFB), relativistic effect, satellite antenna phase center offset, and satellite orbit and satellite clock errors, ionospheric errors, and tropospheric errors that must be provided on a real-time basis. The satellite orbit and satellite clock errors provided by Information-Analytical Centre (IAC) are interpolated at each observation epoch by applying the Lagrange polynomial method and linear interpolation method. We applied Global Ionosphere Maps (GIM) provided by International GNSS Service (IGS) for ionospheric errors, and increased the positioning accuracy by applying the true value calculated with GIPSY for tropospheric errors. As a result of testing the developed GLONASS PPP algorithms for four days, the horizontal error was approximately 1.4 ~ 1.5 m and the vertical error was approximately 2.5 ~ 2.8 m, showing that the accuracy is similar to that of GPS PPP.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.279-288
• /
• 2020

The computational post-buckling strength of the tilted sandwich composite shell structure is evaluated in this article. The computational responses are obtained using a mathematical model derived using the higher-order type of polynomial kinematic in association with the through-thickness stretching effect. Also, the sandwich deformation behaviour of the flexible soft-core sandwich structural model is expressed mathematically with the help of a generic nonlinear strain theory i.e. Green-Lagrange type strain-displacement relations. Subsequently, the model includes all of the nonlinear strain terms to account the actual deformation and discretized via displacement type of finite element. Further, the computer code is prepared (MATLAB environment) using the derived higher-order formulation in association with the direct iterative technique for the computation of temperature carrying capacity of the soft-core sandwich within the post-buckled regime. Further, the nonlinear finite element model has been tested to show its accuracy by solving a few numerical experimentations as same as the published example including the consistency behaviour. Lastly, the derived model is utilized to find the temperature load-carrying capacity under the influences of variable factors affecting the soft-core type sandwich structural design in the small (finite) strain and large deformation regime including the effect of tilt angle.

• Journal of applied mathematics & informatics
• /
• 제42권2호
• /
• pp.257-281
• /
• 2024

In real life, a decision-maker can assign multiple values for pairwise comparison with a certain confidence level. Studies incorporating multi-choice parameters in multi-criteria decision-making methods are lacking in the literature. So, In this work, an extension of the Best-Worst Method (BWM) with multi-choice pairwise comparisons and multi-choice confidence parameters has been proposed. This work incorporates an extension to the original BWM with multi-choice uncertainty and confidence level. The BWM presumes the Decision-Maker to be fully confident about preference criteria vectors best to others & others to worst. In the proposed work, we consider uncertainty by giving decision-makers freedom to have multiple choices for preference comparison and having a corresponding confidence degree for each choice. This adds one more parameter corresponding to the degree of confidence of each choice to the already existing MCDM, i.e. multi-choice BWM and yields acceptable results similar to other studies. Also, the consistency ratio remained low within the acceptable range. Two real-life case studies are presented to validate our study on proposed models.

• 한국강구조학회 논문집
• /
• 제18권2호
• /
• pp.161-171
• /
• 2006

본 논문은 고정과 자유 경계의 다양한 조합을 갖는 직사각형 복합적층판의 고유진동에하고 있다. 본 연구에서는 수학적으로 완전한 특성직교다항식으로 표현되는 근사변위와 Ritz법을 이용하여 Lagrange 범함수의 정상값을 구하였다. 3차원 모델의 정확성이 무차원 진동수의 수렴도를 검토하여 이루어졌으며, 또한 기존 문헌상의 해석결과와의 비교를 통하여 진동수의 정확성을 검토하였다. 본 논문에서 제시된 3차원 진동수의 결과를 이용하여 복합적층판의 기하 및 재료에 관한 매개변수 즉, 형상비(${\mathcal{a/b}}$), 폭두께비(${\mathcal{a/h}}$), 재료의 직교이방성, 플라이 수(${\mathcal{N}}$), 섬유배향각(${\theta}$) 및 적층순서가 미치는 효과를 설명하였다.