• 대한토목학회논문집
• /
• 제26권6A호
• /
• pp.989-999
• /
• 2006

본 연구에서는 차량과 교량을 3차원으로 모델링하고, 교량의 노면조도 및 교량과 차량 사이의 상호작용을 고려하여 이동 차량이 교량을 통과할 때 교량의 선형동적해석을 수행할 수 있는 수치해석방법을 제시하였다. 3차원 차량모델에는 타이어의 접지폭을 고려하여 탠덤 다판스피링 차륜축의 피칭을 고려하여 단일차량인 2축과 3축 차량 및 5축 트랙터-트레일러를 각각 7-자유도, 8-자유도 미 14-자유도로 모델링하였다. 차량의 운동방정식은 Lagrange 방정식을 사용하여 유도하였고, 그 해는 Newmark-${\beta}$법을 사용하여 계산하였다. 교량의 노면조도는 평균값이 영인 정상확율분포롤 가정한 지수스팩트럴밀도를 사용하여 생성시켰다. 교량은 주형을 보요소로, 콘크리트 바닥판은 쉴요소를 이상화시켰으며 주형과 콘크리트 바닥판 사이는 Ragid Link를 사용하여 3차원으로 모델링하였다. 교량의 운동방정시은 모우드 중첩법을 사용하여 풀었다. 본 연구에서 제시한 수치해석방법으로 구한 결과와 Whittemoare 등과 Fenves 등이 실시한 실험값과 비교 검토하여 본 연구의 타당성을 입증하였다.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1084-1094
• /
• 1993

본 연구에서는 모드합성법에 관한 연구를 발전시켜 특히 시간영역에서 동특성 이 변하는 일반적인 구조계의 강제진동해석을 수행할 수 있는 효율적인 방법을 제시한 다. 각 부분구조의 운동방정식은 라그랑지 방정식을 이용하여 유도하며 부분구조 간 의 연결부에서 만족해야 하는 기하학적 적합조건은 라그랑지 승수를 이용하여 처리한 다. 각 부분구조를 나타내기 위하여는 자유경계 또는 하중경계모드(loaded interface mode)를 사용하며 시간영역 응답해석을 위해서는 이산형태(discrete form)의 상태방정 식(state equation)이 사용된다. 제시한 방법은 기존의 모드합성법과는 달리 전체계 를 나타내는 운동방정식을 구성하지 않으므로 전체계의 모우드 매개변수를 구할 필요 가없는 장점이 있다. 시간영역에서 전체 구조계를 합성하지 않고 직접 응답을 구하므 로 미사일 발사체계 등과 같이 시간에 따라 동특성이 변하는 구조계의 동적해석을 위해 효과적으로 활용될 수 있다. 제시한 방법을 간단한 집중질량계와 동특성이 일정 하지 않은 복잡한 구조물의 시간영역 응답해석에 적용하여 그 결과를 직접적분법으로 구한 엄밀해(exact solution)와 비교하며 제시한 타당성을 검증하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.763-774
• /
• 2014

A simple and efficient vibration analysis procedure for stiffened panels with openings and arbitrary boundary conditions based on the assumed mode method is presented. Natural frequencies and modes are determined by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion, where Mindlin theory is applied for plate and Timoshenko beam theory for stiffeners. The effect of stiffeners on vibration response is taken into account by adding their strain and kinetic energies to the corresponding plate energies whereas the strain and kinetic energies of openings are subtracted from the plate energies. Different stiffened panels with various opening shapes and dispositions for several combinations of boundary conditions are analyzed and the results show good agreement with those obtained by the finite element analysis. Hence, the proposed procedure is especially appropriate for use in the preliminary design stage of stiffened panels with openings.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.48-56
• /
• 2001

This paper presents the position tracking control of a closed-loop cylinder system using electro-rheological (ER) valve actuators. After manufacturing three sets of cylindrical ER valves on the basis of Bingham model of ER fluid, a 3 dof(degree-freedom) closed-loop cylinder system having the heave, roll and pitch motions is constructed. The governing equations of motion are derived using Lagrange's equation and a control model is formulated by considering nonlinear characteristics of the system, Sliding mode controllers are the designed for these ER valve actuators in order to achieve position tracking control. The effectiveness of trajectory tracking control performance of the proposed cylinder system is demonstrated through computer simulation and experimental implementation of the sliding mode controller.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.356-359
• /
• 2007

In this paper, the stability of a rotating cantilever pipe conveying fluid with a crack is investigated by the numerical method. That is, the influences of the rotating angular velocity, mass ratio and crack severity on the critical flow velocity for flutter instability of system are studied. The equations of motion of rotating pipe are derived using the Euler beam theory and the Lagrange's equation. The crack section of pipe is represented by a local flexibility matrix connecting two undamaged pipe segments. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations. Generally, the critical flow velocity for flutter is proportional to the angular velocity and the depth of crack. Also, the critical flow velocity and stability maps of the rotating pipe system as a function of mass ratio for the changing each parameter are obtained.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.165-173
• /
• 2000

This Paper presents the position tracking control of a closed-loop cylinder system using electro-rheological(ER) valve actuators. After manufacturing three sets of cylindrical ER valves on the basis of Bingham model of ER fluid, a 3 dof(degree-of-freedom) closed-loop cylinder system having the heave, roll and pitch motions is constructed. The governing equations of motion are derived using Lagrange's equation and a control model is formulated by considering nonlinear characteristics of the system. Sliding mode controllers are then designed fer these ER valve actuators in order to achieve position tracking control. The effectiveness of trajectory tracking control performance of the proposed cylinder system is demonstrated through computer simulation and experimental implementation of the sliding mode controller.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2511-2518
• /
• 2002

Dynamic behaviors and stability of an optical disk drive coupled with an automatic ball balancer (ABB) are analyzed by a theoretical approach. The feeding system is modeled a rigid body with six degree-of-freedom. Using Lagrange's equation, we derive the nonlinear equations of motion for a non -autonomous system with respect to the rectangular coordinate. To investigate the dynamic stability of the system in the neighborhood of the equilibrium positions, the monodromy matrix technique is applied to the perturbed equations. On the other hand, time responses are computed by the Runge -Kutta method. We also investigate the effects of the damping coefficient and the position of ABB on the dynamic behaviors of the system.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.511-516
• /
• 2004

The dynamic behavior of an automatic ball balancer (ABB) is studied considering the effects of gravity and angular velocity profiles. In this study, a physical model for an ABB installed on the Jeffcott rotor is adopted in order to investigate the effects of gravity and angular acceleration. The equations of motion for the rotor with ABB are derived by using Lagrange's equation. Based on derived equations, dynamic responses for the rotor are computed by using the generalized-o method. From the computed responses, the effects of gravity and angular velocity profiles on the dynamic behavior are investigated. It is found that the balancing of the rotor with ABB can be achieved regardless of gravity. It Is also shown that a smooth velocity profile yields relatively smaller vibration amplitude than a non-smooth velocity profile.

• Structural Engineering and Mechanics
• /
• 제15권4호
• /
• pp.463-476
• /
• 2003

This paper deals with nonlinear asymmetric dynamic buckling of clamped laminated angle-ply composite spherical shells under suddenly applied pressure loads. The formulation is based on first-order shear deformation theory and Lagrange's equation of motion. The nonlinearity due to finite deformation of the shell considering von Karman's assumptions is included in the formulation. The buckling loads are obtained through dynamic response history using Newmark's numerical integration scheme coupled with a Newton-Raphson iteration technique. An axisymmetric curved shell element is used to investigate the dynamic characteristics of the spherical caps. The pressure value beyond which the maximum average displacement response shows significant growth rate in the time history of the shell structure is considered as critical dynamic load. Detailed numerical results are presented to highlight the influence of ply-angle, shell geometric parameter and asymmetric mode on the critical load of spherical caps.

• 한국해양공학회지
• /
• 제19권5호
• /
• pp.58-64
• /
• 2005

In this paper, a feedback linearizing anti-sway control law, using a 2-D model for container cranes, is investigated. The equations of motion are first derived from Lagrange's equation. Then, by substituting the sway dynamics into the trolley dynamics, a reduction of variables from three (trolley, hoist, sway) to two (trolley, hoist) is pursued. The anti-sway control law is designed based on the Lyapunov stability theorem. The proposed control law guarantees the uniform asymptotic stability of the closed-loop system. The simulation results of the derived control law, using MATLAB/Simulink, are compared with those of the sliding mode control law, noted in previous literature. Also, experimental results using a 3-D pilot crane are provided.