• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.8
• /
• pp.706-712
• /
• 2002

In general, a deadlock in flexible manufacturing systems (FMSs) is caused by a resource limitation and the diversity of routings. However, the deadlock of industrial controllers such as programmable logic controllers (PLCs) can occur from different causes compared with those in general FMSs. The deadlock of PLCs is usually caused by an error signal between PLCs and manufacturing systems. In this paper, we propose a deadlock detection and recovery (DDR) algorithm to resolve the deadlock problem of PLCs at design stage. This paper employs the MAPN (modified automation Petri net), MTPL (modified token passing logic), and ECC (efficient code conversion) algorithm to model manufacturing systems and to convert a Petri net model into a desired LD (ladder diagram). Finally, an example of manufacturing systems is provided to illustrate the proposed DDR algorithm.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.273-275
• /
• 2006

Ladder Diagram(LD) is the most widely utilized among many sorts of existing programs using for the design of process control system. But it is very difficult to grasp sequential flow of control logic. In this paper, we proposed the method that we can control a lot of blocks. We used PLC in process control system. And, in order to design we used Sequential Function Chart(SFC). In this paper, we proposed the method of block contro. and confirmed feasibility through a simulation.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.131-133
• /
• 2005

In this paper, we proposed the program module that expand output points when increased of the output machine for the design of process control system with PLC. In order to incense output points we need the decoding. There is a hardware decoding and a software decoding. In this paper, we proposed the decoding program module which is a software decoding and confirmed feasibility through a simulation.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.305-307
• /
• 2009

When we design the control system used Programmable Logic Controller(PLC), we program the main algorithm by Ladder Diagram(LD) among the standard language. We can substitute the select sequence function by the unique sequence. We can implement this function by the delay time. Therefore this thesis show the select sequence function by the unique sequence and we confirmed its feasibility through actual example.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.134-136
• /
• 2007

Sequential Function Chart(SFC) is very easy to grasp the sequential flow of control logic and has the compatability for a maintenance, In process control, when an error is occurred, to execute other routine by force, we control the process by remote control. In this paper, we proposed the method of select sequence control by remote control in process control designed by Sequential Function Chart(SFC).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1013-1016
• /
• 2002

제어 시스템에 사용되는 흐름 제어 언어로는 IL(Instruction List), ST(Structured Text), FBD(Function Block Diagram), SFC(Sequential Function Chart), LD (Ladder Diagram)가 있다. 일반적으로 제어 시스템에 탑재하여 사용하는 언어는 상기 언어 중 두 종류 이하의 특정 언어로 제한되어 있다. 이러한 제약을 보완하기 위해, 모든 흐름 제어 언어를 통합 분석할 수 있는 통합 분석기가 필요하다. 본 논문에서는 흐름 제어 언어의 통합 분석 처리가 가능하도록 그래픽 표현의 FBD 를 문자 표현의 EST(Extended Structured Text)로 변형하는 규칙과 문자 표현의 EST 를 IL 로 변형하는 규칙을 제시한다. 언어간의 변형 과정에서 FBD 를 ST 로 표현할 수 없는 부분을 EST 로 정의한다. 또한 본 논문에서 제안된 EST 를 기반으로 통합 분석기의 구조를 제시한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5120-5126
• /
• 2010

ABLB(Alternate Binaural Loudness Balance) test is one of the medical assessments to diagnose detailed lesion of sensory-neural hearing loss based on a recruitment phenomenon. This paper describes an Auto ABLB test software. This software automatically decides test frequency and intensity of first test tone. And it supports an automatic algorithm that analyses the subject's reponses in the current step and then decides intensity of tone provided in next step. Also, this software supports an interface to control and monitor subject's ABLB test. The assessment result is represented by a ladder diagram. The output of this software has been verified using a digital oscilloscope.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.74-81
• /
• 1998

It is not good joint that today's traffic control system that the course of traffic volume increase tendency is followed, in the traffic volume is approched into the time of my car. Accordingly when we analyzed the existing traffic signal control system, the traffic signal system is developed from the machine type that the motor was centered, to get up to date, to the intelligence electron signal control system. But yet, when we have a test and a A/S on the control circuit, the circuit that is designed to the center IC and ROM are complicated. Also, the time of pass lamp that the car line stream is going, can not extended automatically a time till the traffic volume is decreased to the same direction. This theme must be a real time intelligence control system that the time of pass lamp can extend aumatically. The circuit of sequence ladder diagram on the traffic signal control of a crossroads that is desinged, can be satisfied the complicated vehicle order. Therefore when the circuit is changed, the new developed system is economical with that dosen't needs any of components to require the circuit equipment, and the time is saved with needlessness of the circuit wiring again, and have a much trustworthy. The control method of pass signal lamp in the car line stream connecting among PLC and Relay and Temp Sensor, can be changed to hand operation and to semi-automation and to all-automation. New intelligence traffic signal system is composed with all-together system of T Sensor + Video Camera + IBM PC that is able to guiding the establishment of traffic order.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2795-2798
• /
• 2003

본 논문에서는 국내에서 개발하고 있는 과학로켓용 발사통제시스템(FCS, Fire Control System)의 시퀀스제어의 처리 영역을 PLC 시스템을 사용하여 구현하였다. 프로세서의 이중화를 통하여 Hot Backup 시스템을 구축하고 ControlNet 네트워크［l］［2］를 기반으로 하는 프로세서와 I/O 간의 통신을 이용하였다. 먼저 로켓 발사통제시스템의 개요 및 주요 임무에 대하여 설명하고 기존에 사용된 발사통제시스템 구성을 분석하였다. PLC 시스템의 개요와 CPU 동작 내용 그리고 ControlNet 통신방식에 대하여 설명하고 프로세서를 이중화한 시스템을 제안하였다. 또한 이중화된 프로세서의 Switchover［2］방법을 알아보고 이러한 조건에 따른 PLC 시스템을 응용한 발사 통제시스템을 구성하여 이를 위해 작성된 시스템 운용 Ladder Diagram 프로그램에 대한 기술을 논하였다. 개발된 PLC 시스템의 구성을 제시하고 발사체 및 각종 지원시설과 연계한 시험을 통하여 성능을 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.153-158
• /
• 2008

When we design the control system used Programmable Logic Controller(PLC), we program the main algorithm by Ladder Diagram(LD) in many standard language. But if we use an Sequential Function Chart(SFC), we is easy to know the sequential flow of control, to maintenance the controller and to describe a program. Even though a SFC have many merits, A SFC have some problems like a condition and a function of self test. Therefore this thesis show an efficient function of self test and we confirmed its feasibility through actual example.