• Fisheries and Aquatic Sciences
• /
• v.6 no.1
• /
• pp.27-33
• /
• 2003

A lactic acid bacterium showing antimicrobial activity against fish pathogen was isolated from gastrointestinal tract of flounder for the purpose of use as an aquaculture probiotics. From the analysis of morphological and physiological characteristics, the isolated strain was named as Lactococcus sp. HM58. Antimicrobial substance (AMS) from Lactococcus sp. HM58 showed strong growth inhibitory activity against Streptococcus sp., which is a fish pathogenic bacterium. AMS was presumed a proteinaceous compound with stability in heat and wide pH range from 2 to 10. It was started to produce in exponential growth phase and was not produced any more in stationary phase. It showed comparatively broad antimicrobial spectrum against most of gram positive bacteria used for this study. About $84\%$ of Lactococcus sp. HM58 was able to survive in the artificial gastric juice though it was low to the extent in the artificial bile juice. In the sensitivity test for various antibiotics, this strain was highly sensitive for doxycycline, erythromycin, amoxicillin clavu1anic acid and ampicillin.

• Microbiology and Biotechnology Letters
• /
• v.20 no.2
• /
• pp.183-189
• /
• 1992

Cultural conditions of Lactococcus sp. 1112-1, a bacteriocin producing strain, were studied for enhancing its production with regard to environmental and nutritional factors. Optimal compositions of culture medium for bacteriocin production were glucose 20 g/l as carbon source, casein acid hydrolyzate 15 g/l as nitrogen source, and sodium acetate 3 g/l, ammonium citrate 2 g/l as morganic salt with other basal components. The optimal pH of medium and fermentation temperature were 6.2 and $35^{\circ}C$, respectively. This strain required exclusively riboflavin and pantothenic acid for growth and bacteriocin production. In a 1l batch culture, stationary phase emerged after 8.5 hours of fermentation when 1.81 g/l of biomass was accumulated. The maximum antimicrobial activity was 3,894 IU/ml after 12 hours.

• Microbiology and Biotechnology Letters
• /
• v.19 no.3
• /
• pp.209-214
• /
• 1991

Purification of the bacteriocin from Lactococcus sp. 1112-1 was achieved by successive column chromatography on CM-Sephadex C-25 and Sephadex G-50, starting from cell disruption broth. 16.2% of the initial activity was recovered after this purification step and it was shown 123-fold increase in purification. Purified bacteriocin was shown a single band on SDS-polyacrylamide gel electrophoresis. This substance was rather stable at heat treatment and alkaline pH relatively. The residual antimicrobial activity was 38% when the bacteriocin was treated by heat at $100^{\circ}C$ for 60 min. And 23% of the activity remained at pH 8.0 after standing for 48 hr. The amino acid composition of purified bacteriocin was made up 26 residues.

• Preventive Nutrition and Food Science
• /
• v.2 no.2
• /
• pp.101-108
• /
• 1997

A lactic acid bacterium LAB3113, isolated from traditionally fermented Kimchi was found to produce bacteriocin whose activity was very specific toward lactobacilli and not effective against any other bacteria. Lactobacilli affected by the inhibitory substance included Lactobacillus delbrueckii-lactis, L. johnsonii, L. gsseri, and L. curvatus. Based upon biochemical and physiological characteristics, LAB3113 was classified as Lactococcus lactis, and its bacteriocin was named as lactococcin K3113. Lactococcus lactis. LAB3113 produced bacteriocin at th early stage of growth and the concentration of the bacteriocin did not decrease even after alt stationalry phase. Optimal temperature of bacteriocin production was $25^{\circ}C$ at the initial pH 7.0. Partially purified lactococcin K3113 was completely inactivated by protease, but not affected by lipase, lysozyme and RNase. The bacteriocin was very heat-stable even after autoclaving for 20 min. It was also stable in pH changes, an was not affected by th presence of solvents. lacotococcin K3113 appeared to act in bactericidal mode against L. delbrueckii-lactis ATCC4797. Molecular weight of lactococcin K3113 was calibrated as 10,500 dal by SDS-PAGE an activity staining. Lactococcus lactis LAB3113 had four residential plasmids of 3.7kb, 11.2kb, 15.5kb, and 48kh in molecular sizes. Plasmid profile analysis of mutant strain revealed that 15.5 kb plasmid was re-sponsible for the production of lactococcin K3113 and its immunity to the bacteriocin.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.46-50
• /
• 2003

Lactococcus lactis SA72 from Jeot-gal (Korean traditional fermented fish foods) produces lacticin SA72. The influence of several parameters on the fermentative production of lacticin SA72 by Lactococcus lactis SA72 was studied. MRS medium among several media was selected for enhanced bacteriocin production. The mean growth rate and bacteriocin productivity of L. lactis SA72 increased as the initial pH of the media increases. The highest lacticin SA72 activity was detected 3,200 AU/ml at pH 6.0, $32^{\circ}C$, and 1% (inoculum size, v/v) in the jar fermenter. Enhanced production of lacticin SA72 was investigated by a fed-batch cultivation with the intermittent feeding of the concentrated glucose solution. Under the optimized conditions, lacticin SA72 activity finally reached to 6,400 AU/ml.

• Journal of Life Science
• /
• v.14 no.4
• /
• pp.683-688
• /
• 2004

A bacteriocin-producing lactic acid bacteria was isolated from Kimchi on MRS selective media with the use of Lactobacillus delbrueckii subsp. delbrueckii as an indicator strain. The strain YH-10 was identified as Lactococcus lactis subsp. lactis through the API test. The crude bacteriocin (freeze-dried 50% ammonium sulfate precipitate of culture supernatant) produced by the strain was named as lacticin YH-10. Lacticin YH-10 showed the growth inhibitory activity against Gram positive pathogenic bacteria and other lactic acid bacteria. The bacteriocin was inactivated by proteases such as protamex and aroase AP-10 and partially inactivated by amylase, proteinase K, trypsin, and papain. The lacticin YH-10 remained its activity with the treatment of heat at 10$0^{\circ}C$ for 60 min or the changes of pH 2 to 11. However, the activity was lost at high pH combined with the exposure to 10$0^{\circ}C$. The bacteriocin production of the strain was started in the exponential phase and stopped in the stationary phase. The approximate molecular mass of the bacteriocin produced by the strain was approximate 14 kDa in the analysis on SDS-PAGE.

• Journal of Dairy Science and Biotechnology
• /
• v.35 no.3
• /
• pp.196-201
• /
• 2017

Recent studies have reported that certain lactic acid bacteria and their metabolites, such as exopolysaccharides (EPSs), have immunological effects and can modulate the immune system following oral administration. Lactococcus lactis subsp. cremoris FC is a lactic acid bacteria isolated from fermented milk from Caucasians and has been shown to produce EPSs. In this study, the effects of lactoferrins (apo-lactoferrin, holo-lactoferrin, and native-lactoferrin) and transferrins (apo-transferrin and holo-lactoferrin) on the growth of L. lactis subsp. cremoris FC were examined. The addition of lactoferrins and transferrins to L. lactis subsp. cremoris FC cultures was found to be effective at concentrations of 0.5 or 1 mg/mL.

• Microbiology and Biotechnology Letters
• /
• v.21 no.4
• /
• pp.293-298
• /
• 1993

The ppage resistance mechanism of Lactococcus lactis subsp. cremoris ATCC 11602-A1 was investigated. When parent and A1 were incubated at 30 and 40$^{\circ}C$, A1 grew well and multiplication of phage(MOI=1)on A1 slightly occurred at 40$^{\circ}C$ in contrast with parent. There was a great difference of proteolytic activity between parent and A1, irrespective of the temperature. As a result of ADS treatment oon culture broth, survival rate of A1 was 27% at the lethal concentration of parent and adsorption rate of phage was increased to 95~97%, which was considered to come from the exposure of phage receptor site masked by an unknown component. These results suggest that acridine orange (AO) treatment leads to the modification of cell wall, conferring resistance to high temperature and lytic phage. No change in plasmid profiles of A1 at 30 and 40$^{\circ}C$ were found, which suggests that plasmid is not relative to temperature-resistance of A1.

• Microbiology and Biotechnology Letters
• /
• v.22 no.3
• /
• pp.233-239
• /
• 1994

The characteristics of the bacteriophage resistant Lactococcus lactis subsp. cremoris ATCC 11602-A1, the phage-resistant mutant of Lactococcus lactis subsp. cremoris ATCC 11602, was examined. Electron microscopic study of phage adsorption to A1 revealed that after 10 min. incubation of the host-phage mixture, A1 did not show phage adsorption, and after 60 min. did not show a real burst and the release of new phage particles which could be detected in the mixture of its parent strain and phage. However, the phage adsorption rate of A1 after SDS treatment increased to 98%. Moreover, when the cell walls from A1 and parent strain, and the polysaccharide(PS) and peptidoglycan(PG) of their cell wall were mixed with phage and incubated for 15 min., PS and PG from A1 did not bind phage, but only SD-treated cell wall bound phage, and the cell wall and PS of parent strain bound phage. Both A1 and parent strain treated with 0.2 N HCl-and 5% TCA(100$$C) did not bind phage. The results suggest that the phage receptor is still present in the cell wall of the A1, but a cell wall constituent hydrolyzed by SDS blocks phage adsorption by masking the phage receptor. It also suggests that the phage receptor of parent strain is associated with PS of the cell wall.

• Journal of Life Science
• /
• v.6 no.1
• /
• pp.27-33
• /
• 1996

Reactions taken place by a mixed culture of Lactococcus lactis subsp. cremoris KH (lac$^{+}$ prt$^{+}$ ) and KHA (lac$^{-}$ prt$^{-}$ ) and KHA (lac prt ) in cheese ripening have been investigated. Growth characteristics of the mixed culture showed commensalism, and the amounts of proteinases of the mixed culture were small enough. From these results, it is concluded that the production of bitter taste by the mixed culture is a small matter, even if the density of the mixed culture is highly maintained during cheese ripening. Hence, the mixed culture of KH and KHA cells could be a good cheese starter in accelerating the process of cheese ripening.