• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권6호
• /
• pp.107-113
• /
• 2010

This paper presents the prediction of shear strength of oil contaminated clay using fall cone test used to determine the liquid limit of soil. The penetration depth of fall cone is related to water content of soil. Laboratory vane shear can also be related to water content. To explore the relative correlation between penetration depth of fall cone and laboratory vane shear, both fall cone tests and laboratory vane shear test were carried out with water contents of soil. The developed empirical relationships in this studys showed that the shear strength is reduced to 3.9% with 1% increase of oil content. And, the lesser initial water content of contaminated clay, the more shear strength of contaminated clay is affected by oil content.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.391-398
• /
• 2000

The index properties of cohesive soils play an important role to examine entire tendency of soil properties. Especially, the Atterberg limits have a good correlation with compression and shear strength of cohesive soils. However, these values strongly depend on their testing methods. In this study, for Pusan clays the Atterberg limits were peformed under different conditions; for example, four kinds of specimen preparation, two kinds of testing equipment, and four kinds of estimating method. And a laboratory vane test was peformed to compare the undrained shear strength with that of the fall cone test. As experimental results, the value of liquid limit performed for oven-dried sample, followed in ASTM D4318, underestimated by about 10% compared to those of another three methods, irrespective to the used equipments. But the value of plastic limit was not influenced by sample preparation methods and equipments. The liquid limits by one-point methods(Leroueil et al., 1996; Nagaraj et al., 1981) were agreed well with those of different methods. Finally, the undrained shear strength by laboratory vane test was relatively larger than that of fall cone test, and the relationship between both showed a bad trend.

• 한국지반공학회논문집
• /
• 제25권2호
• /
• pp.17-24
• /
• 2009

일반적으로 점토의 비 배수전단강도 산정은 실내실험을 통해 구하지만 초연약점토의 경우 재료의 특성 상 실내실험이 어렵고, 현장실험 또한 여러 제약조건들을 감수해야 한다. 따라서 본 논문에서는 실내에서 수행한 물성실험 및 슬럼프실험과 실내 베인 전단실험의 결과를 회귀분석을 통해 슬럼프 값과 비 배수전단강도 사이의 상관 관계식을 도출하였다. 도출된 상관 관계식의 신뢰성 확보를 위하여 t-분포를 이용한 통계분석을 실시하였고 현장의 데이터와 비교 분석하여 관계식의 적용성 및 신뢰성을 확보하였다.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5572-5577
• /
• 2012

사면파괴가 발생한 사면의 하부 연약지반에 대한 현장원치시험결과와 실내시험결과 그리고 강도 추정식에 의한 결과를 상호 비교분석해 보았다. 사면 하부연약지반에 대한 콘관입시험결과와 현장베인시험결과의 비교를 통해 결정된 연약지반의 콘계수값은 12였다. 콘관입시험자료로부터 콘계수 추정식을 적용하여 구한 연약지반의 비배수강도는 현장베인시험에 의한 그것보다 보수적인 값을 주었다. 압밀시험결과를 이용한 추정식을 통해 연약지반의 비배수강도를 추정하고 현장베인시험에 의한 비배수강도와 비교해 보았다. 세 가지 방법을 통한 추정결과에 따르면 Jamiolkowsky 방법에 의한 결과가 시험을 통해 구한 결과에 가장 근접하였으며 현장베인시험에 의한 비배수강도에 비해 0.88~1.23 범위의 값을 보였다.

• 한국지반신소재학회논문집
• /
• 제19권4호
• /
• pp.65-74
• /
• 2020

토압식(EPB, earth pressure balance) 쉴드 TBM 공법에서 첨가제 주입을 통해 굴착한 흙을 개량하는 쏘일 컨디셔닝(soil conditioning) 기법의 적용은 TBM의 굴진성능을 향상시키는데 필수적이다. 따라서 TBM 장비의 굴진 성능을 모사하는 수치해석 모델에서도 쏘일 컨디셔닝을 적용하는 것은 중요하나, 이를 해석적으로 모사하는 기법에 대한 연구는 현재까지 부족하다. 따라서 본 연구에서는 컨디셔닝 된 흙의 특성을 파악하기 위해 실내 가압 베인시험 장치를 고안하였다. 고안된 장치를 통해 폼에 의해 컨디셔닝 된 흙에 대하여 전단속도를 달리하며 시험을 수행하였으며, 시험은 개별요소법(DEM, discrete element method)을 통해 모델링 되었다. 시험결과와 해석결과의 비교를 통해 개별요소법에서의 입자 접촉조건을 결정하였으며, 이는 개별요소법을 사용한 TBM 굴진해석 모델에서 쏘일 컨디셔닝을 재현할 때 가압 베인시험과 개별요소법 모델의 적용 가능성을 보여준다.

• 산업기술연구
• /
• 제29권B호
• /
• pp.81-88
• /
• 2009

The main purpose of this work is to determine characteristics of undrained shear strength of remolded marine clay at Incheon. Laboratory vane tests with remolded marine clay sampled from west coast at Incheon were performed to investigate the undrained shear strength of them being dumped for reclamation after dredging from the sea bottom. Test results were compared with the predicted values of undrained shear strength proposed by many researchers. It was found that measured results about undrained shear strength with water content was in good agreements with values proposed by Mikasa and Modified Mikasa's empirical formula.

• 산업기술연구
• /
• 제30권A호
• /
• pp.103-109
• /
• 2010

This research is to determine characteristics of undrained shear strength of remolded marine clay at Incheon and Busan, representing typical marine clays in Korea. Laboratory vane tests with remolded marine clays sampled from coasts at Incheon and Busan were performed to investigate the undrained shear strength of them. Test results were compared with the predicted values of undrained shear strength proposed by many researchers. It was found that measured results about undrained shear strength with water content was in good agreements with values proposed by Terzaghi empirical formula.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.237-244
• /
• 2002

A comparative study of 134 mechanical (Dutch cone) and 9. electronic cone (Piezocone) penetration data from the southern part of Korea has been performed. In general, Dutch cone results may be different from piezocone results due to the difference in structure of the cones. Cone penetrometer test data were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986,1990) Cone factors of Dutch cone and piezocone test have empirically been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• 한국농공학회지
• /
• 제45권2호
• /
• pp.96-106
• /
• 2003

134 Dutch cone (mechanical cone) and 9 piezocone (electronic cone) penetration tests have been performed in the southwestern part of Korea. In general, Dutch cone results may be different from that of piezocone due to the difference in structure of the cones. 6 Dutch cone and piezocone test data which were obtained at the same point respectively, were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986, 1990). Cone factors of Dutch cone and piezocone test empirically have been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Relationship formula was also suggested. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• 한국지반공학회지:지반
• /
• 제3권2호
• /
• pp.17-28
• /
• 1987

본연구에서는 해양토질의 전단강도 산정에 대한 Cone관입시험의 신뇌도를 조사하였다. 사질토에 대하여는 내부마찰각의 불확정성을 조사하였으며, 불확정성에는 자료의 공간적 변화와 해석에 사용 되는 공식의 모텔오차 등이 있고, 그중 해석모텔의 오차가 가장 큰 불확정성이었다. 해석 방법마다 구한 내부마찰각이 서로 다르므로, 해석결과를 종합할 수 있는 주관적 견해개념(subjective opinion) 을 도입하였다. Cone관입시험을 이용하여 잡토지반에서 비배빙전단강도를 산정하기 위해서는 실훈시험이나 현장베인 시험으로 구한 전단강도와 Cone 저항력의 경험적인 관계를 이용하여야 한다. 비배수전단강도의 불확정성은 Cone 계수(Nk)의 자료 산포, Nk의 모델 오차, 이방성과 Cone 저항력의 공간적 변화 등에 기인하며, Nk의 자료산포가 가장 큰 불확정성이었다. Nk값의 산정에 이용되는 비교강도시험은 실내시험보다는 현장베인시험의 신뢰성이 더 큰 것으로 나타났다.