• 한국지반공학회논문집
• /
• 제21권10호
• /
• pp.123-131
• /
• 2005

본 연구에서는 양압력을 받는 기초구조물의 보강공법으로 앵커를 시공할 경우, 이에 대한 파괴메카니즘 및 안정해석법의 개발에 기초적인 자료를 제공하기 위해 나선형 앵커에 대한 실내인발시험 및 유한요소해석을 수행하였다. 실내인발시험은 강우시 지하수위 상승으로 인해 기초구조물에 양압력이 작용하는 경우를 고려하기 위해 포화사질토 내에서의 하중-변위특성을 분석한 후, 이를 건조시의 경우 등에 대해 유한요소 해석결과와 비교${\cdot}$분석하였으며, 앵커의 극한인발저항력에 미치는 영향인자 및 앵커의 인발에 따른 거동특성 등을 평가하였다. 또한, 군형태 앵커의 설치간격을 변화시켜가면서 하중-인발변위 특성을 비교한 후, 나선형 앵커의 무리효과에 의한 간섭영향 요인을 분석하였다.

• Computers and Concrete
• /
• 제19권2호
• /
• pp.203-210
• /
• 2017

The purpose of this paper is to evaluate the settlement of lightweight coarse aggregate of self-compacting lightweight concrete (SCLC) after placement of concrete on its final position. To investigate this issue, sixteen samples of concrete mixes were made. The water to cementitious materials ratios of the mixes were 0.35 and 0.4. In addition to the workability tests of self-compacting concrete (SCC) such as slump flow, V-funnel and L-box tests, a laboratory experiment was made to examine the segregation of lightweight coarse aggregate in concrete. Because of the difficulties of this test, the image processing technique of MATLAB software was used to check the segregation above too. Moreover, the fuzzy logic technique of MATLAB software was utilized to improve the clarity of the borders between the coarse aggregate and the paste of the mixtures. At the end, the results of segregation tests and software analyses are given and the accuracy of the software analyses is evaluated. It is worth noting that the minimum and maximum differences between the results of laboratory tests and software analyses were 1.2% and 9.19% respectively. It means, the results of image processing technique looks exact enough for estimating the segregation of lightweight coarse aggregate in SCLC.

• 터널과지하공간
• /
• 제21권5호
• /
• pp.377-385
• /
• 2011

본 연구는 록볼트가 크게 인장되더라도 주입재의 인장파괴를 최소화하여 전면접착식 볼트의 지보효과를 극대화 할 수 있는 새로운 개념의 록볼트를 개발하기 위해 수행하였다. 전면접착식 볼트의 거동 메커니즘을 분석하기 위하여 실내모형시험을 실시하였다. 압축성 간격재를 설치한 록볼트를 고안하고, 실내인발시험을 실시하여 간격재의 최적설치간격을 결정하였으며, 실대형 인발시험을 통하여 압축성 간격재를 설치한 볼트의 인발저항력을 측정하였다. 그 결과 압축성 간격재를 설치한 볼트가 기존의 전면 접착식 볼트보다 약 15% 증가된 인발 저항력을 나타내었다.

• 지질공학
• /
• 제20권3호
• /
• pp.257-269
• /
• 2010

본 연구에서는 급경사지재해 안정화기술 분야에 관하여 한국, 미국, 일본 및 유럽에서 출원 공개/등록된 특허를 중심으로 특허동향을 분석하였다. 중분류는 예측기술, 계측기술, 대책/보강/저감기술, 실내실험과 같이 4개로 분류하였으며, 2,134건의 최종 유효 분석대상 특허를 선별하였다. 특허건수와 출원인수의 상관관계를 이용한 포트폴리오 분석결과 한국 및 미국의 경우 발전기 단계에 있으며, 일본과 유럽의 경우 퇴조기에 있는 것으로 분석되었다. 한국의 경우 국가주도의 연구 활동으로 인하여 특허활동이 활발한 것으로 분석된다. 중분류 기술 분야별 분석 결과, 일본은 급경사재해 예측분야, 미국은 급경사재해 실내실험분야가 각 국가의 경쟁력 분야인 것으로 분석되었으며, 한국의 경우 급경사재해 예측과 급경사재해 실내실험 분야가 공백기술인 것으로 분석되었다. 분석결과를 토대로 기술별 향후 연구개발 방향을 정리하면 예측기술 분야에서는 신규 유한요소해석 방법 또는 수치해석 모델 정립이 필요하고, 계측기술 분야에서는 센서개발기술, 정보취합을 통한 재해예측기술, IT기술과 융합을 통한 장치관련 기술 등이 필요하다. 그리고 재해/대책/저감기술 분야에서는 기존 사방구조물의 개량, 차별화된 사면보강공법 등의 개발이 필요하며 실내실험분야에서는 새로운 최적화된 구조의 실험장치 또는 방법의 개발이 필요한 것으로 조사되었다.

• Geomechanics and Engineering
• /
• 제9권5호
• /
• pp.601-618
• /
• 2015

Soil-reinforcement interaction mechanism is an important issue in the design of geosynthetic reinforced soil structures. This mechanism depends on the soil properties, reinforcement characteristics and interaction between these two elements (soil and reinforcement). In this work the shear strength of sand/geotextile interfaces were characterized through direct and simple shear tests. The direct shear tests were performed on a conventional direct shear device and on a large scale direct shear apparatus. Unreinforced sand and one layer reinforced sand specimens were characterized trough simple shear tests. The interfaces shear strength achieved with the large scale direct shear device were slightly larger than those obtained with the conventional direct shear apparatus. Notwithstanding the differences between the shear strength characterization through simple shear and direct shear tests, it was concluded that the shear strength of one layer reinforced sand is similar to the sand/geotextile interface direct shear strength.

• Geomechanics and Engineering
• /
• 제10권4호
• /
• pp.455-470
• /
• 2016

In ballasted railway tracks, ballast fouling due to finer material intrusion has been identified as a challenging issue in track maintenance works. In this research, deformation characteristics of crushed stone-sand mixtures, simulating fresh and fouled ballasts were studied from laboratory and a 3-D discrete element method (DEM) triaxial compression tests. The DEM simulation was performed using a recently developed DEM approach, named, Yet Another Dynamic Engine (YADE). First, void ratio characteristics of crushed stone-sand mixtures were studied. Then, triaxial compression tests were conducted on specimens with 80 and 50% of relative densities simulating dense and loose states respectively. Initial DEM simulations were conducted using sphere particles. As stress-strain behaviour of crushed stone-sand mixtures evaluated by sphere particles were different from laboratory specimens, in next DEM simulations, the particles were modeled by a clump particle. The clump shape was selected using shape indexes of the actual particles evaluated by an image analysis. It was observed that the packing behaviour of laboratory crushed stone-sand mixtures were matched well with the DEM simulation with clump particles. The results also showed that the strength properties of crushed stone deteriorate when they are mixed by 30% or more of sand, specially under dense state. The results also showed that clump particles give closer stress-strain behaviour to laboratory specimens than sphere particles.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권3호
• /
• pp.326-338
• /
• 2017

The Vortex-induced Motions (VIM) phenomenon of semi-submersibles is relevant for the fatigue life of moorings and risers. Model tests regarding the VIM behavior of a semi-submersible with four square columns were conducted in order to investigate the effects of the current incidence and the aspect ratio of the immerged column. The experimental results show that the largest transverse amplitudes are around 70% of the column width at $30^{\circ}$ and $45^{\circ}$ incidences in a range of reduced velocities from 5 to 8 when the aspect ratio of the immerged column is 1.90. The largest yaw motion occurs at $0^{\circ}$ incidence with the peak value around $4.5^{\circ}$. Similar characteristics of the VIM response are observed for the semi-submersible with aspect ratios of 1.90 and 1.73. When the aspect ratio decreases 50% to 0.87, 30% decrease in the peak transverse amplitudes can be seen.

• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.759-769
• /
• 2018

This paper studies shear and tensile behaviors of headed stud connectors in double skin composite (DSC) structure. Firstly, 11 push-out tests and 11 tensile tests were performed to investigate the ultimate shear and tensile behaviors of headed stud in DSC shear wall, respectively. The main parameters investigated in this test program were height and layout of headed stud connectors. The test results reported the representative failure modes of headed studs in DSC structures subjected to shear and tension. The shear-slip and tension-elongation behaviors of headed studs in DSC structures were also reported. Influences of different parameters on these shear-slip and tension-elongation behaviors of headed studs were discussed and analyzed. Analytical models were also developed to predict the ultimate shear and tensile resistances of headed stud connectors in DSC shear walls. The developed analytical model incorporated the influence of the dense layout of headed studs in DSC shear walls. The validations of analytical predictions against 22 test results confirmed the accuracy of developed analytical models.

• 한국지반공학회지:지반
• /
• 제10권2호
• /
• pp.5-24
• /
• 1994

실내다짐토와 현장다짐토의 회복탄성특성을 비교하기 위하여 5종류의 현장다짐점토와 3종류의 실내다짐점토에 대한 회복탄성계수실험 (Resilient Modulus Test)을 실시하였다. 실험 결과에 의하면 현장시료의 회복탄성계수는 동일한 함수비와 건조단위중량으로 다짐형성된 시료의 그것과 상당히 다른 것으로 나타났다. 회복탄성계수는 1% 변형률에서의 일축압축응력과 좋은 상관 관계를 가지는 것으로 확인되었으며 이들간의 상관관계는 회귀분석에 의하여 간단한 식과 도표로 제안되었다. 구해진 상관관계는 실내다짐토와 현장다짐 토에 대해 약간 다르나, 실제 노반에 존재할 것으로 예상되는 응력조건하에서는 크게 다르지 않다. 제안된 상관관계식 자체는 시공후 지반의 상태변화에 영향을 받지 않으므로 as-compacted나 in-service상태에 모두 적용 가능하다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1330-1333
• /
• 2009

The soil nailing method had used in variable construction field because of construction convenience and reinforcement effect. Especially, the removal soil nailing method is useful support system in vertical excavation. In this study, to develop the wedge type removable soil nailing method for improvement of the removal soil nailing method. Because of the reinforcement materials is most important in soil nailing method, to evaluate the mechanical characteristics during laboratory strength test in this study. To conduct bond strength test of deformed bar combined with a wedged screw inside plastic fixed socket for evaluate the strength characteristics of wedge type removable soil nailing method and evaluate the strength characteristics of fixed socket based on laboratory tests.