• 한국약용작물학회:학술대회논문집
• /
• 한국약용작물학회 2010년도 심포지엄 및 추계학술발표회
• /
• pp.77-92
• /
• 2010

• 대한약학회:학술대회논문집
• /
• 대한약학회 2000년도 춘계총회 및 학술대회
• /
• pp.192.1-192.1
• /
• 2000

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2010년도 추계 학술논문요약집
• /
• pp.425-426
• /
• 2010

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.97-106
• /
• 2020

본 연구의 목적은 소프트웨어 공인시험기관에 국제 표준 ISO/IEC 17025 요구사항을 기준으로 ISO/IEC/IEEE 29119 소프트웨어 시험 절차와 ISO/IEC 25023 소프트웨어 시험 평가 항목을 적용하는 방법에 대한 연구이다. 연구의 방법으로 시험기관에 적용하는 전체 요구사항은 ISO/IEC 17025를 기준으로 ISO/IEC/IEEE 29119와 ISO/IEC 25023을 매핑하여 분석되었다. 해당 매핑 분석에 따라 시험기관 운영을 위한 품질 매뉴얼과 절차서, 지침서는 총 29 종류의 문서를 작성하였다. 연구의 결과 시험기관 관리 시스템은 분석된 전체 요구사항 결과를 적용하여 Confluence 6.15 소프트웨어를 이용하여 구현하였고 시험절차서, 문서, 기록은 시험관리 시스템에 저장하여 운영하도록 하였다. 시험기관운영 적합성 검증은 서울 소재 LG전자 SW공인시험소에서 KOLAS 평가사에 의하여 문서 심사 및 현장 심사로 진행이 되었다. 결론적으로 시험기관 관리 시스템과 시험기관의 운영은 KOLAS의 심사 평가를 통하여 적합하다는 것을 확인할 수 있었고 이전 연구 사례와 비교하여 효과적으로 시험기관 운영과 전체 일정을 단축할 수 있었다.

• Journal of Computing Science and Engineering
• /
• 제9권3호
• /
• pp.142-154
• /
• 2015

Fault localization techniques help locate faults in source codes by exploiting collected test information and have shown promising results. To precisely locate faults, the techniques require a large number of test cases that sufficiently exercise the executable statements together with the label information of each test case as a failure or a success. However, during the process of software development, developers may not have high-coverage test cases to effectively locate faults. With the test case generation techniques, a large number of test cases without expected outputs can be automatically generated. Whereas the execution results for generated test cases need to be inspected by developers, which brings much manual effort and potentially hampers fault-localization effectiveness. To address this problem, this paper presents a method to select a few test cases from a number of test cases without expected outputs for result inspection, and in the meantime selected test cases can still support effective fault localization. The experimental results show that our approach can significantly reduce the number of test cases that need to be inspected by developers and the effectiveness of fault localization techniques is close to that of whole test cases.

• 한국임상수의학회지
• /
• 제38권3호
• /
• pp.120-126
• /
• 2021

Intradermal skin test (IDST) is generally considered a useful tool in identifying causal allergens in canine atopic dermatitis. Currently, multiple allergen simultaneous test (MAST), an in vitro testing method for allergen-specific immunoglobulin E, is being used as an alternative method. However, there are no reports comparing the IDST and MAST results in the same dogs. This study compared the results of both tests to evaluate the agreement and correlation between them. The sensitivity, specificity, and accuracy of the MAST were 76.2%, 64%, and 66.7%, respectively. Moderate positive predicted value (PPV, 50-75%) or high sensitivity (80-100%) were identified for indoor allergens, such as cat epithelia, house dust, and house dust mites. In contrast, high negative predicted value (NPV, 93.3-100%) and specificity (60-100%) were observed for environmental allergens and fungi. Although the agreement between IDST and MAST for all allergens was fair (κ = 0.301), that for each allergen was poor (κ < 0.01), except for birch (κ = 0.158). Spearman's rank correlation analysis revealed a low correlation between the MAST and IDST results (ρ = 0.308, p = 0.001). As compared to the IDST results, the MAST results did not identify the causative allergens sufficiently. IDST may not be performed for environmental allergens and fungi with high NPV and specificity if the MAST result is negative, but it may have to be performed for indoor allergens with moderate PPV and high sensitivity when the MAST result is positive.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.201-208
• /
• 2000

In this study, the behavior of saturated sandy soils under dynamic loads - pore water pressure and effective stress - was investigated using Disturbed State Concept(DSC) model. The model parameters are evaluated from laboratory test data. During the process of loading and reverse loading, DSC model is utilized to trace strain-hardening and cyclic softening behavior. The procedure of back prediction proposed in this study are verified by comparing with laboratory test results. From the back prediction of pore water pressure and effective mean pressure under cyclic loading, excess pore water pressure increases up to initial effective confining pressure and effective mean pressure decrease close to zero in good greement with laboratory test results. Those results represent the liquefaction of saturated sandy soils under dynamic loads. The number of cycles at initial liquefaction using the model prediction is in good agreement with laboratory test results. Therefore, the results of this study state that the liquefaction of saturated sandy soils can be explained by the effective tress analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.697-698
• /
• 2008

This paper deals with finite element characteristic analysis of brushless DC motor according to magnetic property measurement methods. Magnetic property data for non-oriented (NO) electrical steel for electric motors are measured by the Epstein test which is considered as the international standards. Data from Epstein test may result in discrepancy from motor characteristic tests due to innate anisotropic property of NO electrical steel. Finite element analysis were performed for a BLDC motor by various measurement methods such as Epstein test, Ring test and single sheet test (SST), and calculated results were compared with considering anisotropic property conditions.

• Corrosion Science and Technology
• /
• 제2권5호
• /
• pp.207-211
• /
• 2003

The weather resistance of five coatings systems based on alkyd, chlorinated rubber, epoxy, polyurethane and fluoropolymer were studied by natural exposure test and accelerated test. The coatings were exposed at Hanoi station with urban industry atmosphere and at Baichay station with marine atmosphere. The degradation of coatings was evaluated by gloss measurement and surface analysis by scanning electronic microscopy. The results obtained show that among coatings tested the gloss of polyurethane and fluoropolymer coatings remained highly and those of alkyd, chlorinated rubber and epoxy coatings were very low after two years of atmospheric exposure. Under accelerating conditions the gloss of fluoropolymer coatings remained highly after 80 cycles of testing. By comparison with accelerating test in UV-condensation chamber the conditions at atmospheric stations are more aggressive.

• 한국작물학회지
• /
• 제45권2호
• /
• pp.103-107
• /
• 2000

The viviparity of 28 rice varieties was tested at 25 days after heading(DAH), 35DAH, and 45DAH in the laboratory and field condition for 12 days. The incubation temperature was 20/l$0^{\circ}C$ (day/night), 25/15$^{\circ}$C$ and 30/20$^{\circ}$C$ in the laboratory test, and under field water conditions in the field test. The biggest varietal difference of viviparity was found in the laboratory test when examined at 45DAH with the 6-day incubation under 25/15$^{\circ}$C$ . At this conditions the mean viviparous ratio was 32.1 % with the range of 53.9 and the variance of 259.5. In the field test, the significant varietal difference in the viviparity was also found in the lodging treatment at 45 DAH for 6 days. Correlation coefficient analysis between the field and laboratory tests was highly significant from 4 days after incubation at 45 DAH and after 6-day incubation at 35 DAH, and correlation coefficient was higher as incubation days in the laboratory and submerged days under field water became longer. Considering the correlation between the field and laboratory tests, varietal difference of viviparity and convenience of testing, the laboratory test at 45 DAH for 6-day incubation under 25/15$^{\circ}$C$ was the most efficient evaluation method for the viviparity of rice cultivar.