• ETRI Journal
• /
• v.35 no.2
• /
• pp.270-280
• /
• 2013

A fast intra-prediction method is proposed for High Efficiency Video Coding (HEVC) using a fast intra-mode decision and fast coding unit (CU) size decision. HEVC supports very sophisticated intra modes and a recursive quadtree-based CU structure. To provide a high coding efficiency, the mode and CU size are selected in a rate-distortion optimized manner. This causes a high computational complexity in the encoder, and, for practical applications, the complexity should be significantly reduced. In this paper, among the many predefined modes, the intra-prediction mode is chosen without rate-distortion optimization processes, instead using the difference between the minimum and second minimum of the rate-distortion cost estimation based on the Hadamard transform. The experiment results show that the proposed method achieves a 49.04% reduction in the intra-prediction time and a 32.74% reduction in the total encoding time with a nearly similar coding performance to that of HEVC test model 2.1.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.5
• /
• pp.53-60
• /
• 2007

To enhance learning efficiency, we implement a hybrid experimental system for electrical and electronic circuits where web-based virtual laboratory system and distant education system are properly integrated. In the first stage, we developed web-based virtual laboratory systems for electrical/electronic circuit experiments, which are composed of three important sessions and their management system: concept learning, virtual experiment, assessment. In the second stage, we have implemented cost-effective distant laboratory systems for practicing electric/electronic circuits, which can be used to eliminate the lack of reality occurred during virtual laboratory session. The proposed virtual/ distant laboratory systems can be used in stand-alone fashion, but to enhance learning efficiency we integrated them and developed a creative hybrid experimental system for electric and electronic circuits.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.49-54
• /
• 2017

The significant reduction of the image quality caused by the magnetic field of samples is a major problem affecting the application of SEM (scanning electron microscopy) in the analysis of electronic devices. The main reason for this is that the electron trajectory is deflected by the Lorentz force. The usual solution to this problem is degaussing the sample at high temperatures. However, due to the poor heat resistance of some electronic components, it is imperative to find a method that can reduce the impact of magnetic field on the image quality and is straightforward and easy to operate without destroying the sample. In this paper, the influence of different magnetic field directions on the imaging quality was discussed by combining the experiment and software simulation. The principle of the method was studied, and the best observation direction was obtained.

• Ocean Systems Engineering
• /
• v.2 no.3
• /
• pp.189-203
• /
• 2012

New experiments focusing on the evolution characteristics of nonlinear wave trains were conducted in a large wave flume. A series of wave trains with added sidebands, varying initial steepness, perturbed amplitudes and frequencies, were physically generated in a long wave flume. The experimental results show that the increasing wave steepness, increases the speed of sidebands growth. To study the frequency and phase modulation, the Morlet wavelet transform is adopted to extract the instantaneous frequency of wave trains and the phase functions of each wave component. From the instantaneous frequency, there are local frequency downshifts, even an effective frequency downshift was not observed. The frequency modulation increases with an increase in amplitude modulation, and abrupt changes of instantaneous frequencies occur at the peak modulation. The wrapped phase functions show that in the early stage of the modulation, the phase of the upper sideband first diverges from that of the carrier waves. However, at the later stage, the discrepancy phase from the carrier wave transformed to the lower sideband. The phase deviations appear in the front of the envelope's peaks. Furthermore, the evolution of the instantaneous frequency exhibits an approximate recurrence-type for the experiment with large imposed sidebands, even when the corresponding recurrence is not observed in the Fourier spectrum.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2132-2135
• /
• 2005

Cylindrical type air core pulse transformers capable of passing high voltage and energy pulse waveforms with high efficiency and low distortion require a much more delicate design balance of physical dimensions and electrical parameters than iron or ferrite core units. The structure of an air core high voltage pulse transformer is relatively simple, but considerable attention is needed to prevent breakdown between transformer windings. Since the thickness of the windings in spiral type is on the order of sub-millimeter, field enhancement at the edge of the windings is very high. It is, therefore, important to find proper electrical insulation Parameter to make the system compact. Several shapes of the winding are considered for air core pulse transformer development. In this paper, we are described design procedure, parameters measure and experiment results of air core type HV pulse transformer.

• Structural Engineering and Mechanics
• /
• v.57 no.1
• /
• pp.141-159
• /
• 2016

Bearing joint dynamic parameter identification is crucial in modeling the high speed spindles for machining centers used to predict the stability and natural frequencies of high speed spindles. In this paper, a hybrid method is proposed to identify the dynamic stiffness of bearing joint for the high speed spindles. The hybrid method refers to the analytical approach and experimental method. The support stiffness of spindle shaft can be obtained by adopting receptance coupling substructure analysis method, which consists of series connected bearing and joint stiffness. The bearing stiffness is calculated based on the Hertz contact theory. According to the proposed series stiffness equation, the stiffness of bearing joint can be separated from the composite stiffness. Then, one can obtain the bearing joint stiffness fitting formulas and its variation law under different preload. An experimental set-up with variable preload spindle is developed and the experiment is provided for the validation of presented bearing joint stiffness identification method. The results show that the bearing joint significantly cuts down the support stiffness of the spindles, which can seriously affects the dynamic characteristic of the high speed spindles.

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1248-1258
• /
• 2019

This paper presents a moth-flame optimization (MFO)-based maximum power point tracking (MPPT) method for photovoltaic (PV) systems. The MFO algorithm is a new optimization method that exhibits satisfactory performance in terms of exploration, exploitation, local optima avoidance, and convergence. Therefore, the MFO algorithm is quite suitable for solving multiple peaks of PV systems under partial shading conditions (PSCs). The proposed MFO-MPPT is compared with four MPPT algorithms, namely the perturb and observe (P&O)-MPPT, incremental conductance (INC)-MPPT, particle swarm optimization (PSO)-MPPT and whale optimization algorithm (WOA)-MPPT. Simulation and experiment results demonstrate that the proposed algorithm can extract the global maximum power point (MPP) with greater tracking speed and accuracy under various conditions.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.714-720
• /
• 2023

Laser cleaning has the advantages of environmental protection, precision, and high efficiency, and has good prospects for application in removing oxide films on the surface of aluminum alloy. This paper discusses the cleaning threshold and cleaning mechanism of aluminum alloy surface oxide film. A nanosecond pulsed laser was used to remove a 5-㎛-thick oxide film from the surface of 7A04 aluminum alloy, and the target surface temperature and cleaning depth were simulated. The effects of different laser energy densities on the surface morphology of the aluminum alloy were analyzed, and the plasma motion process was recorded using a high-speed camera. The temperature measurement results of the experiment are close to the simulation results. The results show that the laser cleaning of aluminum alloy oxide film is mainly based on the vaporization mechanism and the shock wave generated by the explosion.

• Archives of Pharmacal Research
• /
• v.19 no.4
• /
• pp.251-257
• /
• 1996

The detection of many synthetic chemicals used in industry that may pose a genetic hazard in our environment is subject of great concern at present. In this respect, the genetic toxicity of fenpropathrin ((RS)-.alpha.-cyano-3-phenoxybenzyl-2,2,3,3-tetramethyl cyclopropane carboxylate, CAS No.:39514-41-8), a pyrethroid insecticide, was evaluated in bacterial gene mutation system, chromosome aberration in mammalian cell system and in vivo micronucleus assay with rodents. In bacterial gene mutation assay, no mutagenicity of fenpropathrin (62-$5000\mug/plate$) was observed in Salmonella typhimurium TA 98, 100, 1535 and 1537 both in the absence and in the presence of S-9 metabolic activaton system. In mammalian cell system using chinese hamster lung fibroblast, no clastogenicity of fenpropathrin was also observed both in the absence and in the presence of metabolic activation system in the concentration range of $7-28\mug/ml$. And also, in vivo micronucleus assay using mouse bone marrow cells, fenpropathrin also revealed no mutagenic potential in the dose range of 27-105 mg/kg body weight of fenpropathrin (i.p.). Consequently, no mutagenic potential of fenpropathrin was observed in vitro bacterial, mammalian mutagenicity systems and in vivo micronucleus assay in the dose ranges used in this experiment.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7433-7438
• /
• 2013

Aim: To identify new biomarkers for NPC diagnosis with an anti-EBV Western blot test kit. Methods: Serum samples from 64 NPC patients and healthy subjects with four specific VCA-IgA/EA-IgA profiles were tested with an anti-EBV Western blot test kit from EUROIMMUN AG. Proteins were quantified with scores of intensity visually assigned to the protein bands. The markers which showed statistical differences between the NPC and non-NPC subjects were further evaluated in another 32 NPC patients and 32 controls in comparison with established biomarkers including VCA-IgA, EA-IgA, EBV-related protein IgG, and EBV DNA. Results: Among the markers screened, EA-D p45-IgG showed a statistically significant difference (p < 0.05) between NPC and non-NPC subjects with VCA-IgA positivy. In 32 VCA-IgA positive NPC patients and 32 control subjects, the diagnostic accuracy of EA-D p45-IgG was 78.1% with a positive predictive value of 77.8% and a negative predictive value of 78.6%. In the verification experiment, the specificity and sensitivity of EA-D p45-IgG were 75.0% and 90.6 %, respectively. Conclusions: EA-D p45-IgG might be a potential biomarker for NPC diagnosis, especially among VCA-IgA positive subjects.