• Progress in Superconductivity
• /
• v.14 no.1
• /
• pp.66-70
• /
• 2012

Superconductor flywheel energy storage system (SFESs) is an electro-mechanical battery with high energy storage density, long life, and good environmental affinity. SFESs have been developed for application to a regenerative power of train, the storage of distributed power sources such as solar and wind power, and a power quality improvement. As superconductor bearing is completely passive, it is not necessary to control a system elaborately but accurate analysis in mechanical properties of the HTS bearing is very important for application to SFESs. Stiffness and damping properties are the main index for evaluation the capacity of HTS bearings and make it possible to adjust rotordynamic properties while operating the rotor-bearing system. The superconductor bearing consists of a stator containing single grain YBCO bulks, a ring-type permanent magnet rotor with a strong magnetic field that can reach the bulk surface, and a bearing support for assembly to SFESs frame. In this study, we investigated the stiffness and damping properties of superconductor bearings in 35 kWh SFESs. Finally, we found that 35 kWh superconductor bearing has uniform stiffness properties depend on the various orientations of rotor vibration. We discovered total damping coefficient of superconductor bearing is affected by not only magnetic damping in superconductor bulk but also external damping in bearing support. From the results, it is confirmed that the conducted evaluation can considerably improve energy storage efficiency of the SFESs, and these results can be used for the optimal capacity of superconductor bearings of the SFESs.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.954-959
• /
• 2008

This paper is concerned with the reliable $H_{\infty}$ controller design problem for uncertain linear systems against actuator failures. In the design, the $H_{\infty}$ performance of the closed-loop system is optimized during normal operation(without failures) while the system satisfies a prescribed $H_{\infty}$ performance level in the case of actuator failures. Single and parameter-dependent Lyapunov function approaches are applied in designing suboptimal reliable $H_{\infty}$ controllers. Simulation studies are presented to demonstrate the effectiveness of the proposed design procedures.

• Applied Science and Convergence Technology
• /
• v.24 no.5
• /
• pp.162-166
• /
• 2015

Linear ion beams have been introduced for the ion beam treatments of flexible substrates in roll-to-roll web coating systems. Anode layer linear ion sources (300 mm width) were used to make the linear ion beams. Oxygen ion beams having an ion energy from 200 eV to 800 eV used for the adhesion improvement of Cu thin films on PET substrates. The Cu thin films deposited by a conventional magnetron sputtering on the oxygen ion beam treated PET substrates showed Class 5 adhesion defined by ASTM D3359-97 (tape test). Argon ion beams with 1~3 keV used for the ion beam sputtering deposition process, which aims to control the initial layer before the magnetron sputtering deposition. When the discharge power of the linear ion source is 1.2 kW, static deposition rate of Cu and Ni were 7.4 and $3.5{\AA}/sec$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.2003-2010
• /
• 2010

A new class of halobenzyloxy or alkoxy 1,2,4-triazoles and their hydrochlorides were synthesized through cyclization starting from commercially available phenylhydrazine. The structures were characterized by MS, IR and $^1H$ NMR spectra as well as elemental analyses. All the synthesized compounds were screened for their antibacterial activities in vitro against Staphylococcus aureus (ATCC29213), methicillin-resistant Staphylococcus aureus (N315), Bacillus subtilis, Escherichia coli (ATCC25922), Pseudomonas aeruginosa, Shigella dysenteriae, Eberthella typhosa, and antifungal activities against Candida albicans (ATCC76615), Aspergillus fumigatus by broth microdilution assay method. The results of preliminary bioassay indicated that 3-(2,4-difluorobenzyloxy)-1-phenyl-1H-1,2,4-triazole hydrochloride exhibited the best inhibitory activity with an MIC value of 56.25 ${\mu}M$ against P. aeruginosa superior to Chloramphenicol, and showed comparable activity with Chloramphenicol against E. coli (ATCC25922).

• ETRI Journal
• /
• v.30 no.2
• /
• pp.301-307
• /
• 2008

As broadband access is evolving from digital subscriber lines to optical access networks, Ethernet passive optical networks (EPONs) are considered a promising solution for next generation broadband access. The point-to-multipoint topology of EPONs requires a time-division multiple access MAC protocol for upstream transmission. In this paper, we propose a new enhanced dynamic bandwidth allocation algorithm with fairness called EFDBA for multiple services over EPONs. The proposed algorithm is composed of a fairness counter controller and a fairness system buffer in the optical line terminal. The EFDBA algorithm with fairness can provide increased capability and efficient resource allocation in an EPON system. In the proposed EFDBA algorithm, the optical line termination allocates bandwidth to the optical network units in proportion to the fairness weighting counter number associated with their class and queue length. The proposed algorithm provides efficient resource utilization by reducing the unused remaining bandwidth made by idle state optical network units.

• ALGAE
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2008

Forty-eight taxa of desmids belonging to Class Chlorophyceae (Order - Conjugales, Family - Desmidiaceae), collected from different aquatic habitats of Lalkuan, Kathgodam and Pantnagar areas of Uttaranchal state and Pilibheet district of Uttar Pradesh, which are regions of foothills of Western Himalaya, have been described. These taxa belongs to 5 genera viz. Closterium Nitzsch (6 spp., 5 var., and 2 forma), Euastrum Ehrenberg (1 var.), Staurastrum Meyen (2 spp., 1 var., 1 forma), Cosmarium Corda ex Ralfs (19 spp. and 10 var.), Pleurotaenium Naegeli (1 sp.). Staurastrum pseudopachyrhyncum Wolle (1884) is new record for desmid flora of India.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.5
• /
• pp.117-127
• /
• 2004

A risk analysis on the cutting slope of roads near Cheongju area was carried out with the data from geological map, field investigation, and laboratory test and with the Geographic Information System. A risk analysis method on the cutting slope of road using the Geographic Information System was developed with the data from geological map, field investigation and laboratory tests. In the GIS, road factors which are safety factor, class of road, slake index, slope-protection works, and height of slope in the cutting slopes are classified into some ranks, and their weighting factors were taken into account. This method can be applied effectively to a road management.

• Ocean and Polar Research
• /
• v.24 no.1
• /
• pp.47-53
• /
• 2002

To evaluate the effect of reed population on the distribution and activities of microorganisms, vertical distribution of heterotrophic bacteria, degradation rate of cellulose, extracellular aminopeptidase activity (APA) and metabolic diversity based on GN2 Microlog plate were measured at two salt marsh stations in Hogok-ri, Namyang Bay, west coast of Korea. The number of heterotrophic bacteria at station 1 (reed population inhabited area) showed 2 to 6 times higher than that of station 2 (exposed area) with exception in the surface layer. Cellulose degradation rates in station 1 showed more than 50%. month-I and higher than that of station 2 (10.2 to 38.4%. $month^{-1}$). Yet the APA at two stations did not show difference except surface layer and suggested that APA might not be a significant factor in degrading marsh plant debris. Lipid class compounds, cell wall polymers and L-alanine were widely used by microorganisms. The number and activities of bacterial populations especially concerned in plant debris degradation seemed to be stimulated by the reed communities.

• Natural Product Sciences
• /
• v.19 no.4
• /
• pp.355-359
• /
• 2013

A new monoterpene, crocusatin M (1), was isolated from the flower buds of Buddleja officinalis, together with four known monoterpenes, (6R)-hydroxy-1,1,5-trimethylcyclohex-4-enone (2), (+)-dehydrovomifoliol (3), 7-epiloliolide (4), and crocusatin D (5). Their structures were determined by an extensive analysis of 1D, 2D NMR, HRESI-MS, and CD data as well as by comparison of their spectroscopic data with those of literatures. All isolates were evaluated for inhibitory activities on LPS-induced nitric oxide production in RAW 264.7 cells. Among them, compounds 2 and 3 showed moderate inhibitory effects with $IC_{50}$ values of 63.8 and 24.4 ${\mu}g/ml$, respectively.

• Steel and Composite Structures
• /
• v.7 no.3
• /
• pp.185-200
• /
• 2007

Tubular construction is widely used in a range of civil and structural engineering applications. To date, the principal product range has comprised square, rectangular and circular hollow sections. However, hot-rolled structural steel elliptical hollow sections have been recently introduced and offer further choice to engineers and architects. Currently though, a lack of fundamental structural performance data and verified structural design guidance is inhibiting uptake. Of fundamental importance to structural metallic design is the concept of cross-section classification. This paper proposes slenderness parameters and a system of cross-section classification limits for elliptical hollow sections, developed on the basis of laboratory tests and numerical simulations. Four classes of cross-sections, namely Class 1 to 4 have been defined with limiting slenderness values. For the special case of elliptical hollow sections with an aspect ratio of unity, consistency with the slenderness limits for circular hollow sections in Eurocode 3 has been achieved. The proposed system of cross-section classification underpins the development of further design guidance for elliptical hollow sections.