• Journal of Ubiquitous Convergence Technology
• /
• v.1 no.1
• /
• pp.9-17
• /
• 2007

Feature based stereo matching is an effective way to perform 3D building reconstruction. However, in urban scene, the cluttered background and various building structures may interfere with the performance of building reconstruction. In this paper, we propose a novel method to robustly reconstruct buildings on the basis of rectangle regions. Firstly, we propose a multi-scale linear feature detector to obtain the salient line segments on the object contours. Secondly, candidate rectangle regions are extracted from the salient line segments based on their local information. Thirdly, stereo matching is performed with the list of matching line segments, which are boundary edges of the corresponding rectangles from the left and right image. Experimental results demonstrate that the proposed method can achieve better accuracy on the reconstructed result than pixel-level stereo matching.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2487-2489
• /
• 2001

This paper presents a virtual laboratory system which can be creating efficiencies in the learning process. The proposed virtual laboratory system for electrical circuits provides interactive learning environment under which the multimedia capabilities of world-wide web can be enhanced. The virtual laboratory system is implemented to describe the on-campus laboratory, the learners can obtain similar experimental data through it. The virtual laboratory system is composed of four important components : Principle classroom, Simulation classroom, Virtual experiment classroom and Management system. Learning efficiencies as well as faculty productivity are increased in this innovative teaching and learning environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.9
• /
• pp.4334-4356
• /
• 2017

In orthogonal frequency-division multiplexing (OFDM) systems, phase noise introduced by the local oscillators can cause bit error rate (BER) performance degradation. To solve the phase noise problem, a novel orthogonal-polarization-based phase noise self-cancellation (OP-PNSC) scheme is proposed. First, the efficiency of canceling the phase noise of the OP-PNSC scheme in the AWGN channel is investigated. Then, the OP-PNSC scheme in the polarization-dependent loss (PDL) channel is investigated due to power imbalance caused by PDL, and a PDL pre-compensated OP-PNSC (PPC -OP-PNSC) scheme is proposed to mitigate the power imbalance caused by PDL. In addition, the performance of the PPC-OP-PNSC scheme is investigated, where the signal-to-interference-plus-noise ratio (SINR) and spectral efficiency (SE) performances are analyzed. Finally, a comparison between the OP-PNSC and polarization diversity scheme is discussed. The numerical results show that the BER and SINR performances of the OP-PNSC scheme outperform the case with the phase noise compensation and phase noise self-cancellation scheme.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.151-156
• /
• 2002

Recently, as the geographic information system (GIS) which searches, manages geographic information is used more widely, there is more requests for some systems which can search and display more actual and realistic information. As a response to these requests, the video geographic information system which connects video data obtained by using cameras and geographic information as it is by displaying the obtained video data is being more popular. However, because most existing video geographic information systems consider video data as an attribute of geographic information or use simple one-way links from geographic information to video data to connect video data with geographic information, they support only displaying video data through searching geographic information. In this paper, we design and implement a video geographic information system which connects video data with geographic information and supports hi-directional search; searching geographic information through searching video data and searching video data through searching geographic information. To do this, we 1) propose an ER data model to represent connection information related to video data, geographic information, 2) propose a process to extract and to construct connection information from video data and geographic information, 3) show a component based system architecture to organize the video geographic information system.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.199-207
• /
• 2002

A virtual laboratory for measurement and instrumentation must aim to realize an integrated environment. To achieve this goal, we designed and implemented a client/server distributed environment and developed a web-based virtual laboratory system for electronic circuits. Since our virtual laboratory system is implemented to describe the on-campus laboratory, the learners can obtain similar experimental data through it. The proposed virtual laboratory system is composed of four important components Principle Classroom, Virtual Experiment Classroom, Evaluation Classroom and Overall Management System. Through our virtual laboratory, the learners will be capable of teaming the concepts and theories related to electronic circuit experiments and how to operate the experimental equipments such as multimeters, function generators, digital oscilloscopes and DC power supplies. Also, every activity occurred in our virtual laboratory is recorded on database and Printed out on the preliminary report form. All of these can be achieved by the aid of the Management System. The database connectivity is made by PHP and the virtual laboratory environment is set up slightly differently for each learner. Finally, we have obtained several affirmative effects such as reducing the total experimental hours and the damage rate for experimental equipments and increasing Loaming efficiencies as well as faculty productivity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.620-636
• /
• 2015

Survivability is a necessary property of network system in disturbed environment. Recovery ability is a key actor of survivability. This paper concludes network survivability into a novel composite metric, i.e. Network Recovery Degree (NRD). In order to measure this metric in quantity, a concept of Source-Destination Pair (SD Pair), is created to abstract end-to-end activity based on end nodes in network, and the quality of SD Pair is also used to describe network performance, such as connectivity, quality of service, link degree, and so on. After that, a Survivability Test method in large scale Network based on SD pairs, called STNSD, is provided. How to select SD Pairs effectively in large scale network is also provided. We set up simulation environment to validate the test method in a severe destroy scenario and evaluate the method scalability in different large scale network scenarios. Experiment and analysis shows that the metric NRD correctly reflects the effort of different survivability strategy, and the proposed test method STNSD has good scalability and can be used to test and evaluate quantitative survivability in large scale network.

• ETRI Journal
• /
• v.35 no.6
• /
• pp.1038-1047
• /
• 2013

Augmented reality (AR) is currently being applied actively to commercial products, and various types of intelligent AR systems combining both the Global Positioning System and computer-vision technologies are being developed and commercialized. This paper suggests an in-vehicle head-up display (HUD) system that is combined with AR technology. The proposed system recognizes driving-safety information and offers it to the driver. Unlike existing HUD systems, the system displays information registered to the driver's view and is developed for the robust recognition of obstacles under bad weather conditions. The system is composed of four modules: a ground obstacle detection module, an object decision module, an object recognition module, and a display module. The recognition ratio of the driving-safety information obtained by the proposed AR-HUD system is about 73%, and the system has a recognition speed of about 15 fps for both vehicles and pedestrians.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.64-73
• /
• 1997

Network technology has been developed for very high-speed networking and multimedia data whose characteristics are the continuous and bursty transmission as well as a large amount of data. With this trend users wish to view the information about the application services as well as network devices and system hardware. However, it is rarely available for the users the information of performance or faults of the application services. Most of information is limited to the information related network devices or system hardware. Furthermore, users expect the best services without knowing the service environments in the network and there is no good way of delivering the service related problems and fault information of application services in a high speed network yet. In this paper we present a web-based application management system that we have developed for the past year. It includes a method to build an agent system that uses an existing network management standards, SNMP MIB and SNMP protocols. The user interface of the system is also developed to support visualization effects with web-based Java interface which offers a convenient way not only to access management information but also to control networked applications.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.2
• /
• pp.161-167
• /
• 2021

Laboratory Information Management System(LIMS) is a centralized database for storing, processing, retrieving, and analyzing laboratory data, and refers to a computer system or system specially designed for laboratories performing inspection, analysis, and testing tasks. In particular, LIMS is equipped with a function to support the operation of the laboratory, and it requires workflow management or data tracking support. In this paper, we collect data on websites and various channels using crawling technology, one of the automated big data collection technologies for the operation of the laboratory. Among the collected test methods and contents, useful test methods and contents useful that the tester can utilize are recommended. In addition, we implement a complementary LIMS platform capable of verifying the collection channel by managing the feedback.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.322-340
• /
• 2012

Orthogonal Frequency Division Multiplexing (OFDM) is usually regarded as a spectral efficient multicarrier modulation technique, yet it suffers from a high peak-to-average power ratio (PAPR) problem. Among all the existing PAPR reduction techniques in OFDM systems, side information based PAPR reduction techniques such as partial transmit sequence (PTS) and selective mapping (SLM) schemes, have attracted the most attention. However, the transmission of side information results in somewhat spectral loss and this does not significantly improve the bit error rate (BER) performance. Parallel combinatory (PC) OFDM yields higher spectral efficiency (SE) and better BER performance on Gaussian channels,while is a little but not obvious PAPR improvement over the ordinary OFDM system. This investigation aimed to design a 'perfect' OFDM system. We introduce the side information to rotate the subcarrier phases of our novel PC-OFDM system structure, and call this new system the SIPC(Side information based Parallel Combinatory)-OFDM system. The proposed system achieves better PAPR and SE performance. In addition, considering the tradeoff of system parameters, the proposed system also has the properties of a higher BER.