• 국제초고층학회논문집
• /
• 제11권2호
• /
• pp.87-102
• /
• 2022

In Japan, the population progresses to the extreme aging society and it is entering the phase of the population decrease while the population increase is continuing in the world. The construction market is expected to shrink accordingly, however the situation of labor shortage is expected to continue at a faster rate, because the aging of construction workers is progressing and new younger labor force cannot be secured. In order to supplement the labor shortage, it is required to progress mechanization, automation, labor saving, and efficiency improvement by utilizing the information well in each stage in a series of flow of planning, design, construction, operation, and disassembly in one building. The measures to maintain and expand the construction market by the new efficiency improvement techniques which enhance the utilization degree of building information are required. Currently, the elemental technologies which utilized BIM (Building Information Modeling) are accumulated by advancing digitization in each phase. DX (Digital transformation) in the construction industry can be achieved by the technology maturing and having a series of continuities. It is anticipated that this will evolve to a new method which is unprecedented. Present status of BIM and mechanized constructions in Taisei Construction are introduced, and future prospect is described.

• Journal of Biosystems Engineering
• /
• 제35권6호
• /
• pp.367-372
• /
• 2010

Consumption of pepper, a major spice vegetable used for seasoning Kimchi, continues to increase, but cultivation is in decline due to shortage of rural labor in Korea. The 39.2% of total labor requirement for conventional pepper cultivation was available for harvesting work. Therefore conventional manual harvesting should be turned to mechanical harvesting for labor-saving, cost-reducing and easy work. Surveys on conventional pepper cultivation patterns, labor requirements for various pepper cultivation works, and farmers' opinions on the mechanization of pepper harvesting were conducted to obtain basic informations. The labor requirement for pepper harvesting was 954 h/ha out of a total labor requirement of 2,436 h/ha for pepper cultivation. Harvesting was the hardest work, and hiring workmen for harvesting was also difficult. Farmers preferred to develop a small-scale pepper harvester using agricultural tractor or cultivar. Most farmer agreed to change cultivation pattern for mechanization of pepper harvesting, but hesitated to adopt new one-time-harvesting pepper varieties.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.129-138
• /
• 1993

The shortage of agricultural labour due to industrial growth has greatly induced the mechanization in Korean agriculture. However small and scattered land holdings have been the main constraints in the process of mechanization. This paper describes the interrelationships of farm land structure, machinery selection and machinery operation areas. The sandy silt loam irrigated paddy land having single crop a year was selected as a target areas for this study. Machine operation cost is greatly influenced by operation period, plot geometry and operation area. On the improved geometry plots, optimal machine size increases slowly with increase in operation area. Operable area increases due to increased effective machine capacity on better geometry plot. The difference between the effects of operation period and plot geometry is that in the former case, the cost reduction is caused by delay in increase of machine size, whereas in the latter case timeliness cost is reduced by increase ffective capacity. The effect of farmland consolidation is greater on small plots than that on big plots. Increasing wage rates have induced the adoption of more labor saving machinery. Bigger labor saving machines require enlargement of operation area and larger plots through improvement in farm land structure. Machine cost on poor plot geometry increases more rapidly than that on the good plot geometry and as operation area increases machine cost reduces significantly. It is concluded that the development of agricultural mechanization ion Korea will depend on the improvement in farm land structure and enlargement of operation area.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.107-114
• /
• 2023

Garlic is one of the major seasoned vegetables in Korea along with peppers and onions. Although it is a major cash crop, the aging population of farmers and rising labor and production costs are cited as the reasons for the decreasing production. Accordingly, it is necessary to introduce and spread garlic cultivation mechanization technology to reduce the input labor demand. In this study, conducted a field demonstration in Jeollanam-do using garlic harvesting machinery. In addition, it was intended to improve the mechanization rate of garlic harvesting by deriving factors that can apply to garlic harvesting machines in Jeollanam-do and investigating regional adaptability. As a result of the analysis, it was found that the harvesting performance of the garlic harvester and garlic collector in Jeollanam-do met the agricultural machine test standards. In addition, as a result of calculating the input effect of the mechanized work system compared to the conventional garlic harvesting work system, it was found that there was a labor-saving effect of 96.02%.

• 기술혁신연구
• /
• 제15권2호
• /
• pp.1-24
• /
• 2007

In this study, we estimated a CES production function for the Korean economy. We have found in the empirical results that the elasticity of the factor substitution is less than one and that the Korean economy exhibits labor-saving technological progress. In addition, we obtained the regression coefficient of R&D investment on technological change, i.e., the elasticity of R&D investment with respect to the technological change was 0.26% point. It implies that if R&D stock increases by 1%, labor efficiency increases 0.26% point through technological progress which is Hicksian non-neutral. It confirms that innovation-based growth strategy by increasing R&D investment would be effective on the one hand. Some policy consideration on the other might be needed for an increase in employment which is offset by technological progress.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.45-49
• /
• 2003

According to the rising of national economic level, domestic consumption of vegetables having high additive values is increased continuously due to increased consumption of meat in last decade. These vegetables are produced almost in this country and are limited to import from neighbor countries in due of high transportation expenses for storing in refrigerated container. It is very important to mechanize the harvest work, forming more than 30% for their production cost, in order to cultivate variable vegetables at the same time according to their harvesting seasons. In this state its former harvest methods, with using of human power or semi-automatic harvest, caused to increase their production cost due to high labor cost and low working efficiency.

• 기술혁신연구
• /
• 제24권3호
• /
• pp.81-105
• /
• 2016

본 연구는 ICT산업의 연구개발투자에 따른 비용저감 효과를 계측하는데 그 목적이 있다. 일반적으로 연구개발투자는 제품혁신과 공정혁신을 유발하고, 또 이들은 각각 매출증대와 비용저감 효과를 견인하는 것으로 알려져 있다. 그러나 기 수행된 실증연구들을 살펴보면, 그 대부분이 연구개발투자의 매출증대 기여부분에 초점을 두고 있다. 이에 본 연구는 최근 주목받고 있는 ICT산업을 중심으로 연구개발투자의 비용저감 효과를 분석해 보았다. 이를 위해 초월대수 비용함수와 비용점유율 방정식을 설정하였으며, SUR방법을 통해 실증적으로 분석하였다. 그 분석결과, 연구개발투자에 따른 총비용의 감소효과는 유의한 것을 확인할 수 있었다. 추가적으로 연구개발투자와 각 생산요소들 간의 관계를 살펴보았는데, 연구개발투자와 중간투입은 상호 대체관계, 노동 및 자본과는 보완관계인 것으로 나타났다.

• 원예과학기술지
• /
• 제16권4호
• /
• pp.517-519
• /
• 1998

보온 피복재 종류가 거봉 포도 유목의 월동시 동해방지, 노동력 절감 및 근두암종병 발생 억제에 미치는 영향을 구명하기 위하여 11월 하순에 흙속매몰, 보온덮개, 보온덮개+짚, 부직포, 부직포+짚 등의 보온 피복재를 달리하여 시험한 결과, 월동기간 중 흙속매몰, 보온덮개+짚 피복에서 최고와 최저 온도차가 각각 $2.8^{\circ}C$, $6.4^{\circ}C$로 작았으며, $-10^{\circ}C$ 이하시의 보온효과도 노지 기온에 비하여 5~7배 높았다. 발아는 보온덮개+짚, 부직포+짚에서 시작이 빨랐으며, 발아율도 흙속매몰에 비하여 각각 22%, 7% 높았다. 주지경, 절간장 그리고 신초장은 흙속매몰, 피복재+짚 처리에에서 굵거나 길었으며, 근두암종병 발생은 무피복에 비하여 피복처리에서, 피복처리 중에는 흙속매몰에서 가장 심하였다. 작업단계별 노동력 투하량은 흙속매몰(관행)에 비하여 보온재 피복에서 44~57% 절감되었다.

• 한국잠사학회:학술대회논문집
• /
• 한국잠사학회 1997년도 Progress and Future Development of Sericultural Science and Technology 40th Anniversary Commemoration Symposium
• /
• pp.1-21
• /
• 1997

Silk is praised "Queen of Fiber", which wrote a glorious page in the history of human adornment culture. Thanks to the development of science and technology, silk production has been increased dramatically during last half century. Nowadays, as "Healthy Fiber" silk lets all the globe to be forming the "Silk Boom" Like in other scientific fields, a great deal of progress has been made in sericultural science and technology, which also accelerated the development of multipurpose utilization of sercultural recourses. The main tendency of the sericulture development is raising the quality of cocoon, and at the same time, increasing the output per unit mulberry area and labor production efficiency. The chief measure of raising the cocoon quality is breeding and selecting the new mulberry and silkworm varieties, preventing and curing the diseases and pests and improving the environment of mounting, and the symble for increasing the labor productivity is carrying out the technological system of saving labor and operation ease, and enlarging the production scale. As a natural protein fiber, silk will be still a favorite with human in the next century, because its structure and properties can not be replaced by other any fiber. The 21st century is the biological time, and measures of developing sericulture will use the achievement on the field of molecular biology and biotechnology to carry out the molecular breeding, development regulating, silkworm rearing industrializing, exploiting the new silk and its new usage, utilizing the sericultural resources, and producing the special protein from silkworm as a host of expressing exogenous genes so that make the sericulture to contribute more what it can do for the human being.

• 원예과학기술지
• /
• 제34권5호
• /
• pp.761-770
• /
• 2016

본 연구는 고품질을 가진 노동절감형 3배체 포도의 효율적인 육성 가능성을 검토하기 위해서, 4배체와 2배체의 교배를 통해서 얻어진 3배체 포도계통들에서 과실 특성의 변이 를 교배조합별로 검정하였다. 비록 가용성 고형물 함량과 적정산도와 같은 과실의 품질과 관련 된 형질들은 교배조합들 사이에서 유의미한 차이가 관찰되지 않았지만, $GA_3$ 1회 처리에 따른 과실의 비대 정도는 교배조합에 따른 변이가 크게 나타났다. 특히, '거봉'과 '적령'의 교배 조합에서 생성된 3배체 후대계통에서의 평균 과방중은 491g으로써 다른 교배조합에서 생성된 후대계통들에 비해서 유의적으로 컸으며, 동일한 교배조합 내의 계통간에서의 차이도 크지 않았다. 이러한 연구결과는 '거봉'과 '적령' 같은 특정한 교배 조합이 고품질을 가진 노동력 절감형 대립계 무핵포도를 육성하는데 있어서 효율적으로 이용될 수 있음을 시사하고 있다