• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.255-268
• /
• 2018

Subsea tunnel can be highly vulnerable to seawater intrusion due to unexpected high-water pressure during construction. An artificial ground freezing (AGF) will be a promising alternative to conventional reinforcement or water-tightening technology under high-water pressure conditions. In this study, the freezing energy and required time was calculated by the theoretical model of the heat flow to estimate the total amount of refrigerant required for the artificial ground freezing. A lab-scale freezing chamber was devised to investigate changes in the thermal and mechanical properties of sandy soil corresponding to the variation of the salinity and water pressure. The freezing time was measured with different conditions during the chamber freezing tests. Its validity was evaluated by comparing the results between the freezing chamber experiment and the numerical analysis. In particular, the freezing time showed no significant difference between the theoretical model and the numerical analysis. The amount of refrigerant for artificial ground freezing was estimated from the numerical analysis and the freezing efficiency obtained from the chamber test. In addition, the energy ratio for maintaining frozen status was calculated by the proposed formula. It is believed that the energy ratio for freezing will depend on the depth of rock cover in the subsea tunnels and the water temperature on the sea floor.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.317-319
• /
• 1999

The ciliate, Vorticella was often observed in the rotifer mass culture tanks as common co-existing organism. This Vorticella performed as a predator for aquatic bacteria population in the rotifer mass culture tanks. This study was carried out to investigate a cyst formation medium of Vorticella in the laboratory for keeping Vorticella seed. The test organism Vorticella sp. was isolated from culture water of rotifer mass culture tanks. The cyst of Vorticella was formed by dried-method for the formation and maintainance of cyst. MCCF (Marine Ciliate Cyst Formation) medium was used for cyst formation (incystment), preservation and return to moving cell (excystment) of the marine ciliate, Vorticella sp. The cyst shape and size were ellipical type and $30.51 \pm1.98\;\mu$m (Avg. $\pm$ SD) of minor axis and $28.89 \pm2.12\;\mu$m (Avg. $\pm$ SD) of minor axis (n=10), The Vorticella cyst was kept in the room temperature ($10\~35^{\circ}C$) and total dark condition (24D:0L) during 1 year. The preserved cyst was transferred to moving cell state (excystment) only by the addition of fresh sea water in the MCCF medium. The five Vorticella sp. moving cells of excysted from cysts showed the growth up to 912$\pm$64 cells/10 ml in MCCF medium during the culture period of 16 days. This MCCF medium was very useful tool for cyst formation and species preservation of marine ciliate Vorticella.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.567-572
• /
• 2005

In this study, a lab-scale test was performed to apply the ozone process in drinking water treatment plant using dissolved ai, flotation(DAF). The kinetic study on the ozone decay and hydroxyl(OH) radical formation was investigated by several parameters, such as I.D(Instantaneous ozone demand), $k_c$(ozone decomposition rate), ozone-Ct and OH radical-Ct. Ozonation of several target waters, such as raw water, DAF treated water and filtrate, was conducted to select the optimum position and dosage of ozone process. The highest value of Ozone-Ct and OH radical-Ct was observed at DAF treated water at initial run time($0{\sim}30\;min$). From the results of ozonation, the intermediate ozonation was proposed as the optimum position and the effective dose of ozone was determined to be $1{\sim}2\;mg/L$.

• The Korean Journal of Pesticide Science
• /
• v.15 no.2
• /
• pp.194-200
• /
• 2011

Diamondback moth (DBM, Plutella xylostella L.) is known as the most destructive pest of cruciferous crops worldwide. As most insecticides targeted to mainly larval stage, new insecticides which have hatching-inhibitory or ovicidal activity could be more efficient to control DBM. Therefore, we developed an easy and efficient method for screening ovicidal activity of DBM eggs using aluminum foil. The aluminum foil ($4{\times}12$ cm) coated with filtered juice of chinese cabbage leave (hereinafter called oviposition foil) exposed to 300 newly-emerged adults for 24 hours inside the rearing container. The oviposition foils were replaced every 4 days consecutively after mating, but it was better to discarded over then. Oviposition foil were divided into 6 to 12 pieces depending on egg mass volume. After dipping into test solutions for 10 seconds using faucet, oviposition foil pieces were placed into common petri dish, and then investigated hatchability. The effect of methanol solvent (50%) for 10 seconds dipping on the toxicity against DBM eggs was negligible. In addition, whether covering the petri dish or not should be dependent on nature of active compounds tested. With applying the new bioassay method, methanol extracts from 50 plants were tested the ovicidal activity to DBM eggs. Among them, four plant extracts; Angelica tenuissima root, Lycium chinense root, Cnidium officinale root and Polygala tenuifolia root, showed high ovicidal activity of over 90% control efficacy, against DBM eggs.

• Membrane Journal
• /
• v.15 no.2
• /
• pp.157-164
• /
• 2005

In this study, composite hollow fiber membranes were developed for the recovery of olefin monomers in polyolefin industry off-gases. Polyetherimide (PEI) hollow fiber support membranes were fabricated from spinning solutions containing PEI, NMP and polyethylene glycol (PEG). The influence of dope solution and inner coagulant composition on the permeation properties and structure of hollow fiber supports was examined. PDMS was used as a selective layer and coated on PEI hollow fiber support. The thickness of active layer was controlled by changing coating solution concentration. The permeation properties of hollow fiber supports and composite membranes were characterized with a pure gas permeation test. The optimized composite hollow fiber membrane has $10\;{\mu}m$ selective layer and shows excellent separation performance; the ideal selectivity of olefins over nitrogen is in the following order: 1-butylene (6.4) > propylene (17) > ethylene (97), which selectivity data are similar to the intrinsic olefin/nitrogen selectivities of PDMS. This confirms that the new composite hollow fiber membranes suitable for olefin off-gas recovery has developed successfully.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.5
• /
• pp.341-349
• /
• 2017

PURPOSE. This study evaluated the accuracies of different bite registration techniques for implant-fixed prostheses using three dimensional file analysis. MATERIALS AND METHODS. Implant fixtures were placed on the mandibular right second premolar, and the first and second molar in a polyurethane model. Aluwax (A), Pattern Resin (P), and Blu-Mousse (B) were used as the bite registration materials on the healing abutments (H) or temporary abutments (T). The groups were classified into HA, HP, HB, TA, TP, and TB according to each combination. The group using the bite impression coping was the BC group; impression taking and bite registration were performed simultaneously. After impression and bite taking, the scan bodies were connected to the lab analogs of the casts. These casts were scanned using a model scanner. The distances between two reference points in three-dimensional files were measured in each group. One-way ANOVA and Duncan's test were used at the 5% significance level. RESULTS. The smallest distance discrepancy was observed in the TB group using the temporary abutments. The Blu-Mousse and HP groups showed the largest distance discrepancy. The TB and BC groups showed a lower distance discrepancy than the HP group (P=.001), and there was no significant difference between the groups using the temporary abutments and healing abutments (P>.05). CONCLUSION. Although this study has limitations as an in-vitro investigation, the groups using the temporary abutments to hold the Blu-Mousse record and bite impression coping showed greater accuracy than the group using the healing abutments to hold the pattern resin record.

• Physical Therapy Korea
• /
• v.15 no.2
• /
• pp.54-63
• /
• 2008

The purpose of this study was to examine the effect of the hip internal rotation on knee extensor and hip abductor electromyographic (EMG) activity during stair up and stair down mobility. Eighteen healthy subjects were recruited. All subjects performed stair up and down movements on a step of 30cm height while maintaining the hip in neutral (condition 1) and hip in internal rotation (condition 2). Surface EMG activity was recorded from five muscles (gluteus maximus, vastus lateralis (VL), vastus medialis oblique (VMO), posterior gluteus medius (Gmed), and tensor fascia latae (TFU)) and hip internal rotation angle was measured using a three dimensional motion analysis system The time period for stair up and down was normalized using the MatLab 6.5 program, and EMG activity was normalized to the value of maximal voluntary isometric contraction (%MVIC). The EMG activities according to the hip rotation (neutral or internal rotation) during the entire time period of stair up and down in each phase were compared using a paired t-test. During the entire period of stair up, the EMG activities of VL and TFL in condition 2 were significantly greater than in condition 1 (p<.05). During the entire period of stair down, the EMG activities of VL and TFL in condition 2 were significantly greater than in condition 1 (p<.05). However, the EMG activities of the other muscles were not significantly different between the conditions (p>.05). These results suggest that the stair up and down maintaining hip internal rotation was could be a contributing factor on patellar lateral tracking.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.59-72
• /
• 2007

This study executed to offer the basis for dental technology student who chanced better clinical training. This investigation conducted on 267 of seniors who have been taken clinical training to self written a questionnaire. We used and dealt a spss 12.0 program. Study results below 1. In a question about relationship, one answered "Harmonious" took largest proportion by 40.9% during training, and about the degree of satisfaction of campus life who answered :normal: were the most with 50.0% 2. In a question about clinical training place, most(50.0%) choose place less than 10 for clinical training, and more than 10 for clinical training with 29.7%. Residue statues was most of them resided own home with 78.6%. About their commuting time from home to training place, 50.0% was under 30min, 34.1% took time 30$\sim$60min. 3. In a question about clinical trainer, most (34.4%) choose as dental lab president, as each part manager with 34.1%, a senior with 7.6% and not exist to clinical trainer with 7.6%. 4. A perfect score about teaching efficiency and satisfaction of clinical practice of dental technology students was 5. The average of score about satisfaction of clinical practice was 3.25 and circumstance of clinical training got 3.50 as a highest score. the lowest score was 2.87 that is about satisfaction of clinical training period. The average of score of teaching efficiency was 3.25. 'a Role model' got 3.55 as the highest score and 'utility for student' got 3.12 as the lowest 3.12. 5. The result of T-test to see of the satisfaction according to the general character and clinic training condition between teaching efficiency is that the degree of satisfaction of clinical training showed statistical significance only in the degree of satisfaction of college life(p<0.05), teaching efficiency has a statistical significance with age and satisfaction of college life(p<0.05). 6. The relation between of teaching efficiency of clinical training and satisfaction of clinical training of dental technologic student has a statistical relation r=0.551 and a statistical meaning in significance leveler 0.01.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.178-183
• /
• 2002

Zinc fluosilicate ($ZnSiF_6$, 15% aqueous solution) was prepared using zinc oxide (ZnO) and fluosilicic acid ($H_2SiF_6$) by soluiton synthetic method. The fluidity and hydration properties of cement which was added $ZnSiF_6$ (aq.) as an additive for cement were studied. At water to cement ratio (W/C) equals to 0.45, the initial fluidity and slump loss of cement paste which the addition of $ZnSiF_6$ (aq.) was increased from 1.0% to 4.0% based on cement weight were investigated. Initial fluidity of cement paste was measured by mini-slump test and slump loss was examined by measuring the fluidity variation of cement paste with time elapsed from 0 min to 120 min at intervals 30 min. Also, the effect of $ZnSiF_6$ addition on the setting and hydration of cement paste when $ZnSiF_6$ increased in the addition range 1.0% to 3.0% were investigated. The fluidity of cement paste which was added 2.1% $ZnSiF_6$ (aq.) presented the highest value among all addition ranges. The setting time of cement paste was retarded gradually and the heat evolution of hydrated cement was reduced with the increasing of $ZnSiF_6$ addition.

• Journal of the Korea Concrete Institute
• /
• v.28 no.4
• /
• pp.473-480
• /
• 2016

The purpose of this study is to provide analytical method to reasonably evaluate the complicated failure behaviors of shear friction of reinforced concrete shear wall specimens using grade 500 MPa high-strength bars. A total of 16 test specimens with a variety of variables such as aspect ratio, friction coefficient of interface in construction joint, reinforcement details, reinforcement ratio in each direction, material properties were selected and the analysis was performed by using a non-linear finite element analysis program (RCAHEST) applying the modified shear friction constitutive equation in interface based on the concrete design code (KCI, 2012) and CEB-FIP Model code 2010. The mean and coefficient of variation for maximum load from the experiment and analysis results was predicted 1.04 and 17% respectively and properly evaluated failure mode and overall behavior characteristic until failure occur. Based on the results, the analysis program that was applied modified shear friction constitutive equation is judged as having a relatively high reliability for the analysis results.