• 통합자연과학논문집
• /
• 제2권4호
• /
• pp.237-242
• /
• 2009

As semitransparent dye-sensitized solar cells (DSSCs) have advanced to large-scale applications from lab-level research, the large-scale performance has attracted much attention. Modules of DSSCs have been investigated to optimize the efficiency as a $TiO_2$ systhesis temperature and a surface treatment of $TiCl_4$ aqueous solution. Essentially, these semitransparent modules have an extended structure with lab-scale works with the exception of the dimensions and methods for the series connection. The $5cm{\times}6.5cm$ modules have shown an efficiency of about 6% without a scattering layer. While the fill factors of modules depend on the width of each $TiO_2$ unit cell, they are much less dependent on the lengths of the unit cells.

• 한국환경과학회지
• /
• 제25권3호
• /
• pp.425-438
• /
• 2016

This study carried out zeta potential measurements of the Microcystis sp. under various solutions condition and investigated the characteristics of Microcystis sp. through the size control of microbubbles to eliminate algae that causes problems in aquatic ecosystems and human activities. DAF process was adopted and several coagulants were used to remove the Microcystis sp. CCD Camera was used to measure and analyze the size of microbubble, and fluorescent microscope was used to observe the particle, algae species and community. Zeta potential behavior of the algae was analyzed by using ELS-Z. Lab-scale and pilot-scale experiments were conducted to test flotation process. Polyaluminium chloride(PAC) coagulant was used, and the removal efficiency of the algae was assessed through Chlorophyll-a analysis. In the Lab-scale experiment, 2.2 ppm, 11 ppm, 22 ppm, and 44 ppm of polyaluminium chloride was injected to coagulate the algae. The coagulated algae was floated by the microbubble. The microbubbles in the experiments were generated at a air pressure of 450 ~ 550 kPa. The microbubble size was controlled in $36{\mu}m$, $100{\mu}m$, and $200{\mu}m$, respectively by using different diffuser. The results of lab-scale experiments on flotation plant indicated that the average removal rate was about 90% or above for 11 ppm, 22 ppm, and 44 ppm of polyaluminium chloride. On the other hand, in the pilot-scale experiment, the removal efficiency was in the range of 85% to 95% in all dose ranges of polyalumium chloride and aluminium sulfate coagulants.

• 한국추진공학회지
• /
• 제14권2호
• /
• pp.29-38
• /
• 2010

하이브리드 로켓을 위한 파라핀 왁스/LDPE 혼합 연료에 관한 실험적 연구를 수행하였다. 혼합 연료 의 성능 평가를 위해 혼합 연료의 다양한 연소 특성을 순수 파라핀, HTPB, HDPE, SP-1a 연료와 비교하였다. 순수 파라핀의 후퇴율은 HDPE에 비해 large-scale과 lab-scale 모터에서 각각 10.2, 9.8배 증가 하였다. Lab-scale 혼합 연료의 후퇴율은 HDPE에 비해 3.4배 증가하여 HTPB, HDPE 연료보다는 높은 후퇴율을 나타냈으나 순수 파라핀, SP-1a에 비해서는 낮은 후퇴율을 나타냈다. 혼합 연료의 특성속도와 비추력은 순수 파라핀, HTPB, HDPE 보다 높았고 SP-1a 연료와 대등하였다. 이로부터 혼합 연료가 효과적인 하이브리드 로켓 연료가 될 수 있음을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.61-63
• /
• 2005

Pentacene based OTFT on PC and PES plastic substrates have been fabricated in a scale of 5 inches. We could get a small OTFT device enough to be applicable for AMOLED by acquiring the at least misalignment margin through a contact aligner. And also we could find out the degradation of device parameter through the integration processes and improve the properties by using a buffer layer as an etch stopper in an active patterning. Through these, the mobility of device is more than about $0.2cm^2/Vs$ and $I_{on}/I_{off}$ is higher than $10^5$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.1020-1023
• /
• 2002

We successfully developed a-Si TFT controlled active matrix cathode (AMC) with gated Mo emitters. Also, we could remove emitter failures of the AMC through a novel surface treatment of Mo-tips, which indicates reduction of $MoO_3$ or chemical wet etching of $MoO_3$ by surface treatment. Transient behaviors of the AMC are strongly dependent on not only DC characteristics of device but also the device structure. Brightness and gray scale were well realized by low-voltage scan and data signals addressed to a-Si TFTs.

• Journal of Plant Biotechnology
• /
• 제7권2호
• /
• pp.129-134
• /
• 2005

Callus induction from a leaf explant has been achieved in Lilium Oriental hybrid 'Casa Blanca'. The highest frequency of callus induction was obtained on MS medium supplemented with 0.5 mg/L BA and 2.0 mg/L NAA after 2 months of culture. The cultures maintained continuously without change in color and type of callus when they cultured in the dark. Plantlet regeneration with a high frequency was achieved from induced calli on the same medium. A number of shoots are formed from one cluster of callus, and bulblets developed into intact plantlets after transfer to hormone-free MS medium. No phenotypic variations were observed among regenerants. Enhancement in plantlet regeneration via callus formation would be expected to facilitate the efficiency of transformation of this Oriental hybrid 'Casa Blanca'.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권1호
• /
• pp.18-26
• /
• 2017

In a previous study, we assessed the feasibility of ferric chloride ($FeCl_3$) as a washing agent in bench-scale in-situ soil washing to remove Pb from agricultural paddy soil. Herein is a subsequent study to evaluate variations in soil properties after $FeCl_3$ soil washing in terms of fractionation and bioavailability of Pb and chemical properties of the soil. After soil washing, the soil pH decreased from 4.8 to 2.6 and the exchangeable fractions of Pb in the soil increased from 12 mg/kg to 15 mg/kg. Variations in the Pb fractionation of the soil increased Pb bioavailability by almost three-fold; however,the base saturation decreased by 75%. The concentrations of total nitrogen and available phosphate were similar before and after soil washing. The available silicate concentration significantly increased after soil washing but was two times lower than that of soil washed with HCl, which is widely used as a washing agent. This indicates that $FeCl_3$ can be an acceptable washing agent that protects the soil clay structure. The results suggest that soil amendment, such as liming, is needed to recover soil pH, reduce mobility of Pb, and provide exchangeable bases of Ca, Mg, and K as essential elements for the healthy growth of rice plants in reused soil that has been washed.

• 한국항공우주학회지
• /
• 제43권9호
• /
• pp.773-780
• /
• 2015

본 논문에서는 아음속 환경에서 원통형 비행체의 구조 건전성을 확인하였다. 극한 기동 조건에서 원통형 비행체의 정적 구조 안전성을 확인하기 위하여 구조 해석과 전기체 정적 구조 시험을 수행하였다. 수치 해석을 위하여 상용 유한 요소 프로그램 MSC. Patran/Nastran을 이용하였으며, 전기체 정적 구조 시험에는 중량 보상 장치, 하중 부가 장치, 데이터 획득 장치를 적용하였다. 이와 함께, 동특성 시험으로서 햄머 충격시험을 수행하여 원통형 비행체의 동적 특성을 확인하였다.

• 공업화학
• /
• 제28권3호
• /
• pp.332-338
• /
• 2017

본 연구에서는 주요한 휘발성 유기화합물의 발생원인 도장공장 중에서 중소규모의 공장에 적용 가능한 저온 vacuum swing adsorption (VSA) 기술에 대하여 연구하였다. 저온 VSA 기술이란 기존의 thermal swing adsorption (TSA)의 단점을 보완하기 위하여 저온($60{\sim}90^{\circ}C$)에서 감압하여 흡착질을 탈착하는 방식이다. 국내에서 시판되고 있는 상용 활성탄을 이용하여 대표적인 VOCs인 톨루엔의 흡 탈착 특성을 랩(Lab)규모로 실험하였으며, 이를 바탕으로 $30m^3min^{-1}$ 규모의 VSA 시스템을 설계하여 실제 도장 공장에 적용하여 VSA 시스템의 현장적용 가능성에 대하여 평가하였다. 랩 규모 실험 결과, 2 mm 펠렛형 활성탄은 4 mm 펠렛형 활성탄보다 높은 톨루엔 흡착능을 나타내었으며, 이에 파일럿 규모의 VSA의 충진 활성탄으로 사용되었다. 탈착 실험에서는 $80{\sim}90^{\circ}C$의 온도와 100 torr의 압력이 최적 조건으로 결정되었다. 랩 규모 실험 결과를 바탕으로 파일럿 규모 VSA 시스템을 설계하였으며 실제 도장 공장에 현장 적용하여 95회 흡 탈착 실험을 반복 수행하였다. 수행 결과, 연속 흡 탈착 반복실험 후, 도정공장에서 배출된 VOCs를 98% 이상 효과적으로 제거 가능함을 확인하였으며 VSA 시스템의 안정적인 현장 적용이 가능함을 검증하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제19회 학술발표대회 논문초록집
• /
• pp.60-60
• /
• 2002