• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.297-302
• /
• 2008

To direct the evolution of nanostructure and immobilize ${\gamma}-Al_2O_3$ catalyst, nanocrystalline La-doped-$Al_2O_3$ powder were prepared by the sol-gel process with addition of an amphiphilic block copolymer template (pluronic P123: $(poly(ethyleneoxide)_{20}-poly(propyleneoxide)_{70}-poly(ethyleneoxide)_{20})$. The dried gel is amorphous, whereas heating at temperature above $700^{\circ}C$ leads to the formation of nanocrystalline ${\gamma}$ and ${\delta}-Al_2O_3$ and these two phases is kept until $1100^{\circ}C$. ${\alpha}-A1_2O_3 $starts to form at $1200^{\circ}C$ with $LaAl_{11}O_{18}$. The surface morphology and crystal structure has been observed by field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD). Solid state $^{27}Al$ MAS NMR indicates two types of local environment, i.e. octahedral and tetrahedral sites. The surface area and pore size was compared among these powders using the BET nitrogen adsorption measurements.

• 자원환경지질
• /
• 제30권1호
• /
• pp.1-14
• /
• 1997

The shales from the Euiseong area are interbedded along the bedding in Cretaceous Gyeongsang Supergroup, which are composed mainly of quartz, plagioclase, K-feldspar and associated with trace amount of biotite, muscovite, chlorite, pyrite, hematite, carbonate and clay minerals. The ratio of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in shales from the Shindong Group are ranged from 9.16 to 24.32 and from 1.70 to 5.97, and the Hayang Group ranged from 2.76 to 8.89 and from 0.42 to 2.74, which are negative correlated between $K_2O/Na_2O$ and $Al_2O_3/Na_2O$ against $SiO_2/Al_2O_3$ respectively. Those are suggested that controlled of mineral compositions in shales due to substitution and migration of elements by sedimentation and diagenesis. These shale formation were deposited in basin of terrestrial environments originated from the igneous rocks, and the REE of these rocks are not influenced with diagenesis and hydrothermal alterations on the basis of $Al_2O_3$ versus La, La against Ce, Zr versus Yb, the ratios of La/Ce (0.43 to 0.62) and Th/U (1.11 to 10.71). The narrow range in trace and REE element characteristics as Co/Th (0.63 to 1.92), La/Sc (1.98 to 5.90), Sc/Th (0.58 to 1.30), V/Ni (0.90 to 3.25), Cr/V (0.45 to 1.78), Ni/Co (1.88 to 6.67) and Zr/Hf (30.04~60.87) of these shales argues for inefficient mixing of the simple source lithologies during sedimentation. These rocks also show much variation in $La_N/Yb_N$ (6.90 to 17.02), Th/Yb (4.17 to 13.68) and La/Th (1.98 to 5.90), and their origin is explained by derivation from a mixture of intermediate to acidic igneous rocks.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.168-174
• /
• 2011

La을 기반으로 하는 다양한 페롭스카이트 촉매를 페치니(Pechini)법에 따라 제조하고, 이 촉매를 음식물 처리 과정에서 발생하는 악취 성분의 저온 산화 반응에 적용하여 효과적인 탈취가 이루어지도록 하였다. 배출 가스의 정량 및 정성 분석을 통하여 음식물 처리 시간에 따른 주요 악취 성분의 양을 조사하였다. 그리고 주요 악취 성분들로 구성된 표준 악취 시료는 산화 반응기의 반응물로 도입하였다. 먼저, 다양한 전이 금속 M이 치환된 La 기반 페롭스카이트 촉매($LaMO_{3}$: M=Cr, Mn, Fe, Co 및 Ni)를 제조하고 전이 금속 M의 영향을 알아보기 위해 악취 성분의 산화 반응에 적용한 결과, 테스트한 촉매 중에서 $LaNiO_3$ 촉매가 가장 우수한 촉매 활성을 보였다. 또한 촉매 활성을 증진시키기 위하여 Pt가 치환된 페롭스카이트 촉매($LaNi_{1-x}Pt_{x}O_{3}$: x=0, 0.03, 0.1 및 0.3)를 제조하였고, 이로부터 $LaNi_{0.9}Pt_{0.1}O_{3}$ 촉매가 가장 효율적인 촉매인 것을 알 수 있었다. 끝으로 저온 산화 반응에서의 페롭스카이트 촉매의 활성을 극대화하기 위하여 담지된 페롭스카이트 촉매($XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$: X=페롭스카이트 함량(wt%), 0, 10, 20, 30, 40, 50 및 100)를 적용하였다. $XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ 촉매의 활성은 페롭스카이트 함량에 따라 화산형(Volcano-shaped) 곡선을 나타내었으며, 이 때 $20LaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ 촉매가 $180^{\circ}C$의 반응 온도에서 88.7%의 가장 높은 전환율을 보였다.

• The Korean Journal of Ceramics
• /
• 제3권4호
• /
• pp.253-256
• /
• 1997

Epitaxially grown Pb(Zr, Ti)O$_3$thin films were prepared on LaAlO$_3$substrates by the dipping pyrolysis process using metal naphthenates as starting materials Homogeneous Pb-Zr-Ti solutions with toluene were spin-coated onto the substrates and pyrolyzed at 50$0^{\circ}C$ Highly oriented Pb(Zr, Ti)O$_3$films confirmed by X-ray diffraction $\theta$-2$\theta$ scans were obtained by heat-treated at 75$0^{\circ}C$ in air The X-ray pole-figure analysis and reciprocal-space mapping of the resulting 0.6$\mu\textrm{m}$ films showed that the thin films comprising the c-axis oriented tetragonal phase have an epitaxial relationship with the LaAlO$_3$substrates.

• Journal of Korean Vacuum Science & Technology
• /
• 제7권1호
• /
• pp.8-12
• /
• 2003

The effects of lattice strain on the magnetic and the transport properties of La$_{0.8}$Sr$_{0.2}$MnO$_3$films grown on a LaAlO$_3$ (001) substrate and on a La$_{0.8}$Sr$_{0.2}$MnO$_3$ layer have been studied. It was observed that the metal-insulator and the ferromagnetic transitions turn out to be at higher temperatures for the film deposited on La$_{0.8}$Sr$_{0.2}$MnO$_3$ layer with respect to that on LaAlO$_3$. The dependence of Curie temperature on the bulk and the Jahn-Teller strains has also been determined. determined.

• 마이크로전자및패키징학회지
• /
• 제31권1호
• /
• pp.43-48
• /
• 2024

SrTiO₃ (STO) 기판 위에 성장된 LaAlO₃ (LAO) 계면에서의 이차원 전자 가스 (2DEG)의 발견은 복합 산화물 이종 구조를 기반으로 한 혁신적인 전자소자 연구의 장을 제공함으로써 많은 관심을 받아왔다. 하지만 LAO 박막을 형성하기 위하여, 일반적으로 물리기상증착법(PVD)을 기반으로 하는 펄스 레이저 증착 (PLD) 등의 기법이 주로 사용되어 왔으나, 공정 비용이 많이 들며 LAO 내 La와 Al의 정밀한 조성 제어가 어려운 단점이 있다. 본 연구에서는 PVD에 비해 경제적인 대안인 용액 기반 공정을 사용하여 LAO 박막을 제조하였고, 그 전기적 특성을 평가하였다. LAO 전구체 용액의 농도를 다르게 하여 LAO의 두께를 2에서 65 nm까지 변화시켰으며, 각 두께에 따른 면저항 및 캐리어 농도를 도출하였다. 진공 열처리 후 형성된 전도성 채널의 면저항 값은 0.015에서 0.020 Ω·sq^-1 범위로 나타났으며, 이러한 결과는 기존 문헌과 비교하였을 때 LAO와 STO 사이의 계면에서의 전자 이동뿐만 아니라 계면으로부터 떨어져 있는 STO bulk 영역으로의 전자 전도를 시사한다. 본 연구 결과는 용액 기반 공정을 통한 2DEG 형성 및 제어를 구현한 것으로, 공정 비용을 줄이고 전자 소자 제조에서 보다 광범위한 응용 가능성을 제시한다는 점에 그 의의가 있다.

• 한국세라믹학회지
• /
• 제28권12호
• /
• pp.1005-1011
• /
• 1991

Y-Ba-Cu-O thin films were in-situ fabricated on LaAlO3(100) substrates using the second harmonics of a pulsed Nd:YAG laser. Thin films were deposited under 200 (mtorr) of oxygen atmosphere, when the substrate temperature was changed between 67$0^{\circ}C$ and 82$0^{\circ}C$. After deposition, the films were in-situ annealed at 50$0^{\circ}C$ under 2/3 bar of oxygen pressure. We showed that the deposition temperature affects the formation of superconducting phase, the resistance, and the surface morphology. The Y-Ba-Cu-O thin films deposited at 76$0^{\circ}C$ show the zero resistance critical temperature of 85 K.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.171.2-171.2
• /
• 2016

The 2-dimensiona electron gas (2DEG) layers have opened tremendous interests in the heterooxide interfaces formed between two insulating materials, especially between LaAlO3 and $SrTiO_3$. The 2DEG layers exhibit extremely high mobility and carrier concentrations along with metallic transport phenomena unlike the constituent oxide materials, i.e., $LaAlO_3$ and $SrTiO_3$. The current work inserted artificially the interfacial layer, $Sr_xCa_{1-x}TiO_3$ between $LaAlO_3$ and $SrTiO_3$, with the aim to controlling the 2-dimensional transports. The insertion of the additional materials affect significantly their corresponding electrical transports. Such features have been probed using DC and AC-based characterizations. In particular, impedance spectroscopy was employed as an AC-based characterization tool. Frequency-dependent impedance spectroscopy have been widely applied to a number of electroceramic materials, such as varistors, MLCCs, solid electrolytes, etc. Impedance spectroscopy provides powerful information on the materials system: i) the simultaneous measurement of conductivity and dielectric constants, ii) systematic identification of electrical origins among bulk-, grain boundary-, and electrode-based responses, and iii) the numerical estimation on the uniformity of the electrical origins. Impedance spectroscopy was applied to the $LaAlO_3/Sr_xCa_{1-x}TiO_3/SrTiO_3$ system, in order to understand the 2-dimensional transports in terms of the interfacial design concepts. The 2-dimensional conduction behavior system is analyzed with special emphasis on the underlying mechanisms. Such approach is discussed towards rational optimization of the 2-dimensional nanoelectronic devices.

• 한국재료학회지
• /
• 제14권3호
• /
• pp.163-167
• /
• 2004

TiAl(La)N thin films were oxidized in vacuum of about 7 Pa to reduce the oxidation of WC-Co as a substrate. The oxidation rate constants of the thin films were quantified by an assumption of parabolic oxidation. Increasing AI content significantly decreased the parabolic oxidation rate constant. A simultaneous addition of AI and La was more effective to reduce the oxidation rate. The parabolic oxidation rate constant of $Ti_{0.66}$ $Al_{0.32}$ $La_{ 0.02}$N thin film at 1273 K showed about ten times lower than that of TiN. The addition of a small amount of La with Al induced the preferential formation of dense $\alpha$ $-Al_2$$O_3$ film in oxide film, leading to the abrupt reduction of oxidation rate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.705-708
• /
• 2001

The effect of grinding on the synthesis of LaAO$_3$ceramics was investigated. The mixture ground by plantary ball mill showed 70nm particle size (wet ball mill or unground=0.5 $\mu$m). Monophase LaAlO$_3$powders were formed when ground samples were heated at 100$0^{\circ}C$, however unground samples required temperatures above 130$0^{\circ}C$. Density of the ground samples sintered at 140$0^{\circ}C$ showed 98.3% of theoretical density (unground=93.5% at 150$0^{\circ}C$). Dielectric constant of the ground samples($\varepsilon$r=22.4) showed higher values than that of the unground samples($\varepsilon$r=20.32). Temperature coefficient of capacitance($\tau$$_{c}$) and dielectric loss (tan$\delta$) of the ground samples were similar to those of unground samples.s.