• Experimental and Molecular Medicine
• /
• 제50권11호
• /
• pp.14.1-14.14
• /
• 2018

The link between antibiotic treatment and IF-associated liver disease (IFALD) is unclear. Here, we study the effect of antibiotic treatment on bile acid (BA) metabolism and investigate the involved mechanisms. The results showed that pediatric IF patients with cholestasis had a significantly lower abundance of BA-biotransforming bacteria than patients without cholestasis. In addition, the BA composition was altered in the serum, feces, and liver of pediatric IF patients with cholestasis, as reflected by the increased proportion of primary BAs. In the ileum, farnesoid X receptor (FXR) expression was reduced in patients with cholestasis. Correspondingly, the serum FGF19 levels decreased significantly in patients with cholestasis. In the liver, the expression of the rate-limiting enzyme in bile salt synthesis, cytochrome P450 7a1 (CYP7A1), increased noticeably in IF patients with cholestasis. In mice, we showed that oral antibiotics (gentamicin, GM or vancomycin, VCM) reduced colonic microbial diversity, with a decrease in both Gram-negative bacteria (GM affected Eubacterium and Bacteroides) and Gram-positive bacteria (VCM affected Clostridium, Bifidobacterium and Lactobacillus). Concomitantly, treatment with GM or VCM decreased secondary BAs in the colonic contents, with a simultaneous increase in primary BAs in plasma. Moreover, the changes in the colonic BA profile especially that of tauro-beta-muricholic acid ($T{\beta}MCA$), were predominantly associated with the inhibition of the FXR and further altered BA synthesis and transport. In conclusion, the administration of antibiotics significantly decreased the intestinal microbiota diversity and subsequently altered the BA composition. The alterations in BA composition contributed to cholestasis in IF patients by regulating FXR signaling.

• The Journal of Advanced Prosthodontics
• /
• 제13권5호
• /
• pp.333-342
• /
• 2021

PURPOSE. To evaluate the impact of five different tooth preparation designs on the marginal and internal fit discrepancies of cobalt-chromium (CoCr) crowns produced by computer-aided designing (CAD) and selective laser melting (SLM) processes. MATERIALS AND METHODS. Five preparation data were constructed, after which design crowns were obtained. Actual crowns were fabricated using an SLM process. After the data of actual crowns were obtained with structural light scanning, intaglio surfaces of the design crown and actual crown were virtually superimposed on the preparation. The fit-discrepancies were displayed with colors, while the root means square was calculated and analyzed with one-way analysis of variance (ANOVA), Tukey's test or Kruskal-Wallis test (α = .05). RESULTS. The marginal or internal color-coded images in the five design groups were not identical. The shoulder-lip and sharp line angle groups in the CAD or SLM process had larger marginal or internal fit discrepancies compared to other groups (P < .05). In the CAD process, the mean marginal and internal fit discrepancies were 10.0 to 24.2 ㎛ and 29.6 to 31.4 ㎛, respectively. After the CAD and SLM processes, the mean marginal and internal fit discrepancies were 18.4 to 40.9 ㎛ and 39.1 to 47.1 ㎛, respectively. The SLM process itself resulted in a positive increase of the marginal (6.0 - 16.7 ㎛) and internal (9.0 - 15.7 ㎛) fit discrepancies. CONCLUSION. The CAD and SLM processes affected the fit of CoCr crowns and varied based on the preparation designs. Typically, the shoulder-lip and sharp line angle designs had a more significant effect on crown fit. However, the differences between the design groups were relatively small, especially when compared to fit discrepancies observed clinically.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1964-1969
• /
• 2021

We developed a Dual-PPACs detector for fast neutron measurements that consists of two sets of PPAC: conventional PPAC and fission PPAC. A²³⁸U(U₃O₈) coating is placed in the fission PPAC's anode, which is used as the neutrons conversion layer. An experiment was performed to measure neutron time-of-flight (TOF) in which ²⁵²Cf spontaneous fission source was used. An excellent time resolution of 164ps has been observed at 6 mbar in isobutene gas. With the excellent time resolution of Dual-PPACs detector, exact neutron energy can be extracted from the timing measurement. The experimental detection efficiency was 1.9 × 10^-7, consistent with the efficiency of 2.5 × 10^-7 given by a Geant4 simulation. Ultimately, the results show that the Dual-PPACs detector is a suitable candidate for measuring fast neutrons in the future CiADS system.

• The Journal of Advanced Prosthodontics
• /
• 제11권5호
• /
• pp.286-296
• /
• 2019

PURPOSE. The aim was to study the masking ability of high-translucency monolithic zirconia and provide guidance in selecting resin luting cements in order to mask discolored substrates. MATERIALS AND METHODS. 160 high-translucency zirconia specimens were divided into 32 groups depending on their thickness and shades. Using five shades of try-in paste, the specimens were luted onto the substrates (Co-Cr, precious-metal, opaque porcelain-sintered Co-Cr, opaque porcelain-sintered precious-metal, and 5M3-shade zirconia). All CIELAB color parameters were measured and statistically analyzed. RESULTS. Zirconia shade and thickness and try-in paste shade affected CIELAB color parameters (P=.000) in different substrates groups, and there were interactions among these factors (P=.000). All five try-in paste shades can be chosen to achieve ${\Delta}E$ values of zirconia with 1.2 - 1.5 mm for masking dark-tooth-like 5M3-shade and zirconia with 1.5 mm for masking precious-metal groups < 2.6. Only suitable try-in paste shades were used, can ${\Delta}E$ values that less than 2.6 be achieved when applied translucent monolithic zirconia with 0.7-1.0 mm for masking dark-tooth-like 5M3-shade and zirconia with 0.7 - 1.2 mm for masking precious-metal groups. CONCLUSION. Choosing suitable resin cement shades is necessary for high-translucency monolithic zirconia to achieve ideal masking ability (${\Delta}E$ < 2.6) on the dark-tooth.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2174-2183
• /
• 2021

Helium cooled solid breeder blanket as an important blanket candidate of the Tokamak fusion reactor uses ceramic pebble bed for tritium breeding. Considering the poor effective thermal conductivity of the ceramic breeder pebble bed, thin structure of tritium breeder pebble bed is usually adopted in the blanket design. The container wall has a great influence on the thin pebble bed packing structure, especially for the assembly of mono-sized particles, and thin pebble bed will appear anisotropic effective thermal conductivity phenomenon. In this paper, thin ceramic pebble beds composed of 1 mm diameter Li₄SiO₄ particles are generated by the EDEM 2.7. The effective thermal conductivity of different thickness pebble beds in the three-dimensional directions are analyzed by three-dimensional thermal network method. It is observed that thin Li₄SiO₄ pebble bed showing anisotropic effective thermal conductivity under the practical design size. Normally, the effective thermal conductivity along the bed vertical direction is higher than the horizontal direction due to the gravity effect. As the thickness increases from 10 mm to 40 mm, the effective thermal conductivity of the pebble bed gradually increases.

• 산업진흥연구
• /
• 제7권1호
• /
• pp.75-80
• /
• 2022

崔溥（公元1454~1504),字淵淵,號錦南。曾任李氏朝鮮弘文館副校理（五品官員),1487年赴濟州島執行公務,期間因其父亡故,故於1488年閏正月初三回家奔喪,卻不幸在途中遭遇暴風雨,所乘船舶受損,致其在海上漂流了近半月之久。後其在「大唐國浙江台州府臨海縣界」(今三門縣)登陸後經陸路到達杭州,後於杭州乘船沿京杭大運河經水路至北京。明朝弘治皇帝親自接見並賞賜了崔溥後,從北京走陸路過山海關,經鴨綠江返回了自己的國家。崔溥在中國滯留了4個半月,136天,行程將近9000里地。回國後,他用漢文寫出了《漂海錄》一書,這部以日記體形式的著作共5萬余字,一定程度上記錄了明朝弘治初年中國京杭運河流域的地理,城市,民俗等方面內容,為後世研究明朝時期的政制,司法,運河,城市,地志,民俗以及海防提供了重要的文獻記錄。

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제49권4호
• /
• pp.171-183
• /
• 2023

Objectives: Understanding the lingual nerve's precise location is crucial to prevent iatrogenic injury. This systematic review seeks to determine the lingual nerve's most probable topographical location in the posterior mandible. Materials and Methods: Two electronic databases were searched, identifying studies reporting the lingual nerve's position in the posterior mandible. Anatomical data in the vertical and horizontal dimensions at the retromolar and molar regions were collected for meta-analyses. Results: Of the 2,700 unique records identified, 18 studies were included in this review. In the vertical plane, 8.8% (95% confidence interval [CI], 1.0%-21.7%) and 6.3% (95% CI, 1.9%-12.5%) of the lingual nerves coursed above the alveolar crest at the retromolar and third molar regions. The mean vertical distance between the nerve and the alveolar crest ranged from 12.10 to 4.32 mm at the first to third molar regions. In the horizontal plane, 19.9% (95% CI, 0.0%-62.7%) and 35.2% (95% CI, 13.0%-61.1%) of the lingual nerves were in contact with the lingual plate at the retromolar and third molar regions. Conclusion: This systematic review mapped out the anatomical location of the lingual nerve in the posterior mandible, highlighting regions that warrant additional caution during surgeries to avoid iatrogenic lingual nerve injuries.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권7호
• /
• pp.1841-1857
• /
• 2023

CenterNet, a novel object detection algorithm without anchor based on key points, regards the object as a single center point for prediction and directly regresses the object's height and width. However, because the objects have different sizes, directly regressing their height and width will make the model difficult to converge and lose the intrinsic relationship between object's width and height, thereby reducing the stability of the model and the consistency of prediction accuracy. For this problem, we proposed an algorithm based on the regression of the diagonal half-length and the center angle, which significantly compresses the solution space of the regression components and enhances the intrinsic relationship between the decoded components. First, encode the object's width and height into the diagonal half-length and the center angle, where the center angle is the angle between the diagonal and the vertical centreline. Secondly, the predicted diagonal half-length and center angle are decoded into two length components. Finally, the position of the object bounding box can be accurately obtained by combining the corresponding center point coordinates. Experiments show that, when using CenterNet as the improved baseline and resnet50 as the Backbone, the improved model achieved 81.6% and 79.7% mAP on the VOC 2007 and 2012 test sets, respectively. When using Hourglass-104 as the Backbone, the improved model achieved 43.3% mAP on the COCO 2017 test sets. Compared with CenterNet, the improved model has a faster convergence rate and significantly improved the stability and prediction accuracy.

• Korean Journal of Acupuncture
• /
• 제40권4호
• /
• pp.177-183
• /
• 2023

Objectives : One of the crucial combinations of acupoints for treating various disorders involves the Eight Confluent acupoints. The present study aims to investigate the selection patterns of the Eight Confluent acupoints in clinical trials and determine the most frequent pairings through network analysis. Methods : The frequencies of the Eight Confluent acupoints were extracted from the Acusynth database, which includes data from 421 clinical investigations. We examined the degree distribution, eigenvector centrality, proximity centrality, and betweenness centrality of these acupoint combinations using network analysis. Results : Data mining revealed that among the Eight Confluent acupoints, PC6 and TE5 were the most commonly applied in the treatment of 30 disorders. Additionally, we identified the most frequently co-occurring pairs of Eight Confluent acupoints by network analysis which included PC6-GV20, SP4-GV4, LU7-LI4, TE5-PC7, GB41-SP6, KI6-BL62, and SI3-BL62. Conclusions : Through the application of data mining and network analysis, we have elucidated the selection patterns and combinations of the Eight Confluent acupoints. These findings provide valuable insights that can enhance doctors' understanding of clinical database-driven Eight Confluent acupoint selection patterns.

• Korean Journal of Radiology
• /
• 제21권4호
• /
• pp.483-493
• /
• 2020

Objective: To evaluate the distribution and characteristics of peripheral nerve abnormalities in chronic inflammatory demyelinating polyneuropathy (CIDP) using magnetic resonance neurography (MRN) and to examine the diagnostic efficiency. Materials and Methods: Thirty-one CIDP patients and 21 controls underwent MR scans. Three-dimensional sampling perfections with application-optimized contrasts using different flip-angle evolutions and T1-/T2- weighted turbo spin-echo sequences were performed for neurography of the brachial and lumbosacral (LS) plexus and cauda equina, respectively. Clinical data and scores of the inflammatory Rasch-built overall disability scale (I-RODS) in CIDP were obtained. Results: The bilateral extracranial vagus (n = 11), trigeminal (n = 12), and intercostal nerves (n = 10) were hypertrophic. Plexus hypertrophies were observed in the brachial plexus of 19 patients (61.3%) and in the LS plexus of 25 patients (80.6%). Patterns of hypertrophy included uniform hypertrophy (17 [54.8%] brachial plexuses and 21 [67.7%] LS plexuses), and multifocal fusiform hypertrophy (2 [6.5%] brachial plexuses and 4 [12.9%] LS plexuses) was present. Enlarged and/or contrast-enhanced cauda equina was found in 3 (9.7%) and 13 (41.9%) patients, respectively. Diameters of the brachial and LS nerve roots were significantly larger in CIDP than in controls (p < 0.001). The largest AUC was obtained for the L5 nerve. There were no significant differences in the course duration, I-RODS score, or diameter between patients with and without hypertrophy. Conclusion: MRN is useful for the assessment of distribution and characteristics of the peripheral nerves in CIDP. Compared to other regions, LS plexus neurography is more sensitive for CIDP.