• Journal of Korean Neurosurgical Society
• /
• v.65 no.3
• /
• pp.422-429
• /
• 2022

Objective : Extracranial supra-aortic dissections (ESADs) with severe stenosis, occlusion and/or pseudoaneurysm presents potential risk of stroke. Endovascular stenting to reconstruct non acute phase ESADs (NAP-ESADs) is an alternative to anticoagulant or antiplatelet therapy. However, its feasibility, safety and efficacy of stenting in NAP-ESADs is unclear. This study aims to investigate the long-term outcomes of the feasibility, safety and efficacy of stenting in NAP-ESADs. Methods : Seventy-four patients with 91 NAP-ESAD vessels with severe stenosis, occlusion and/or pseudoaneurysm presents potential risk of stroke who underwent stent remodeling were enrolled into this respective study from December 2008 to March 2020. Technical success rate, complications, clinical and angiographic results were harvested and analyzed. Results : Success rate of stent deployment was 99% (90/91) with no procedural mortality or morbidity. Transient ischemic attack occurred in three patients during operation (4.1%, 3/74). Asymptomatic embolisms of distal intracranial vessels were found in two patients (2.7%, 2/74). One hundred and forty-two stents deployed at 85 carotid (135 stents) and six vertebral (seven stents) vessels. Six stent types (Wingspan, 28/135, 20.7%; Solitaire, 10/135, 7.4%; Neuroform, 8/135, 5.9%; LVIS, 2/135, 1.5%; Precise, 75/135, 55.6%; Acculink, 12/135, 8.9%) were deployed at carotid arterial dissection while two types (Wingspan, 5/7, 71.4%; Solitaire 2/7, 28.6%) at vertebral arterial dissection. Digital subtracted angiography (56%, 51/91), computational tomography angiography (41.8%, 38/91) and high resolution magnetic resonance imaging (2.2%, 2/91) were adopted for follow up, with a mean time of 17.2±15.4 months (5-77). All patient modified Rankin Scale scores showed no increase at discharge or follow-up. Angiographically, dissections in 86 vessels in 69 patients (94.5%, 86/91) were completely reconstructed with only minor remnant dissections in four vessels in four patients (4.4%, 4/91). Severe re-stenosis in the stented segment required re-stenting in one patient (1.1%, 1/91). Conclusion : Stent remodeling technique provides feasible, safe and efficacious treatment of ESADs patients with severe stenosis, occlusion and/or pseudoaneurysm.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1187-1191
• /
• 2016

Background: The prevalence of prostate cancer (PCa) has been increasing in recent years. Treatment strategies are largely based on the results of bone scan screening. Therefore, our aim was to investigate predictors of positive bone metastasis in newly diagnosed PCa patients. Materials and Methods: After extensive review, 336 consecutive patients newly diagnosed with PCa between April 2010 and November 2013 at our institution were enlisted in the study. Patients were divided into two groups according to bone scan results. Univariate analyses (Chi-square test for discrete variables and independent t-test for continuous variables) were applied to determine the potentially significant risk factors associated with distant bone metastasis. Binary logistic regression analyses were used to further investigate the influence of these factors on bone metastasis. Results: The patient mean age was $71.9{\pm}8.6years$ (range: 48 to 94 years). The mean prostate specific antigen (PSA) level and biopsy Gleason score were $260.2{\pm}1107.8ng/mL$ and $7.4{\pm}1.5$, respectively. The body mass index (BMI) for the series was $24.5{\pm}3.4kg/m^2$. Sixty-four patients (19.0%) had a positive bone scan result. Patients with positive bone scan results had a significantly lower BMI ($23.3{\pm}3.5$ vs. $24.8{\pm}3.3$; p=0.003), a higher Gleason score ($8.5{\pm}1.1$ vs. $7.1{\pm}1.5$; p < 0.001), and a higher PSA level ($1071.3{\pm}2337.1$ vs. $69.4{\pm}235.5$; p < 0.001) than those without bone metastasis. Multivariate logistic regression analysis employing the above independent predictors demonstrated that a Gleason score of ${\geq}7$, clinical stage ${\geq}T3$, $BMI{\leq}22kg/m^2$, and an initial PSA level of ${\geq}20ng/mL$ were all independent predictors of bone metastasis. Conclusions: A bone scan might be necessary in newly diagnosed PCa patients with any of the following criteria: clinical stage T3 or higher, a Gleason score of 7 or higher, BMI equal to or less than 22, and a PSA level of 20 or higher.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6663-6667
• /
• 2013

Purpose: The current research was conducted to investigate the efficacy and safety of pemetrexed given continuously as a basement agent for first-, second- to third line chemotherapy of patients with metastatic lung adenocarcinoma. Patients and Methods: Patients with metastatic lung adenocarcinoma who were diagnosed in Jiangsu Cancer Hospital and Research Insitute, were enrolled. All received pemetrexed 500 $mg/m^2$ (intravenous; on day 1), and another chemotherapieutic agent every 3 weeks until disease progression, or intolerable toxicity. Then the patients were changed to a second line chemotherapy that was still based on pemetrexed 500 $mg/m^2$ and another chemotherapeutic agent differing from the first line example, until disease progression, or intolerable toxicity. When third line chemotherapy was needed, pemetrexed 500 $mg/m^2$ and another new chemotherapeutic agent were combined until disease progression. Evaluation of efficacy was conducted after two cycles of chemotherapy using the Response Evaluation Criteria for Solid Tumors. Toxicity was recorded according to NCI Criteria for Adverse Events version 3.0. Results: From January 2010 to September 2013, 15 patients were enrolled. Their median age was 56 years (range 43 to 77 years). Eight patients were male and 7 female. Five patients (33.3%) achieved PR, while 6 patients (40.0%) remained stable, no CR on first line; and 1 PR (7.7%), 5 stable (38.5%) were recorded when pemetrexed was ordered in second line; 5 patients (41.7%) were stable after pemetrexed was combined in third line; no complete response was observed. Main side effects were grade 1 to 2 neutrophil suppression and thrombocytopenia. Other toxicities included elevated transaminase and oral mucositis, but no treatment related death occurred. Conclusions: Pemetrexed continuously as a basement agent from first-, second- to third line chemotherapy is mildly effective in treating patients with metastatic lung adenocarcinoma with tolerable toxicity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.6
• /
• pp.763-770
• /
• 2015

Improved meat quality and greater muscle yield are highly sought after in high-quality chicken breeding programs. Past studies indicated that polymorphisms of the Perilipin gene (PLIN1) are highly associated with adiposity in mammals and are potential molecular markers for improving meat quality and carcass traits in chickens. In the present study, we screened single nucleotide polymorphisms (SNPs) in all exons of the PLIN1 gene with a direct sequencing method in six populations with different genetic backgrounds (total 240 individuals). We evaluated the association between the polymorphisms and carcass and meat quality traits. We identified three SNPs, located on the 5' flanking region and exon 1 of PLIN1 on chromosome 10 (rs315831750, rs313726543, and rs80724063, respectively). Eight main haplotypes were constructed based on these SNPs. We calculated the allelic and genotypic frequencies, and genetic diversity parameters of the three SNPs. The polymorphism information content (PIC) ranged from 0.2768 to 0.3750, which reflected an intermediate genetic diversity for all chickens. The CC, CT, and TT genotypes influenced the percentage of breast muscle (PBM), percentage of leg muscle (PLM) and percentage of abdominal fat at rs315831750 (p<0.05). Diplotypes (haplotype pairs) affected the percentage of eviscerated weight (PEW) and PBM (p<0.05). Compared with chickens carrying other diplotypes, H3H7 had the greatest PEW and H2H2 had the greatest PBM, and those with diplotype H7H7 had the smallest PEW and PBM. We conclude that PLIN1 gene polymorphisms may affect broiler carcass and breast muscle yields, and diplotypes H3H7 and H2H2 could be positive molecular markers to enhance PEW and PBM in chickens.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.196-213
• /
• 2001

A split beam ultrasonic transducer operating at a frequency of 70 kHz to use in the fish sizing echo sounder was developed and the acoustic radiation characteristics were experimentally analyzed. The amplitude shading method utilizing the properties of the Chebyshev polynomials was used to obtain side lobe levels below -20 dB and to optimize the relationship between main beam width and side lobe level of the transducer, and the amplitude shading coefficient to each of the elements was achieved by changing the amplitude contribution of elements with 4 weighting transformers embodied in the planar array transducer assembly. The planar array split beam transducer assembly was composed of 36 piezoelectric ceramics (NEPEC N-21, Tokin) of rod type of 10 mm in diameter and 18.7 mm in length of 70 kHz arranged in the rectangular configuration, and the 4 electrical inputs were supplied to the beamformer. A series of impedance measurements were conducted to check the uniformity of the individual quadrants, and also in the configurations of reception and transmission, resonant frequency, and the transmitting and receiving characteristics were measured in the water tank and analyzed, respectively. The results obtained are summarized as follows : 1. Average resonant and antiresonant frequencies of electrical impedance for four quadrants of the split beam transducer in water were 69.8 kHz and 83.0 kHz, respectively. Average electrical impedance for each individual transducer quadrant was 49.2$\Omega$ at resonant frequency and 704.7$\Omega$ at antiresonant frequency. 2. The resonance peak in the transmitting voltage response (TVR) for four quadrants of the split beam transducer was observed all at 70.0 kHz and the value of TVR was all about 165.5 dB re 1 $\mu$Pa/V at 1 m at 70.0 kHz with bandwidth of 10.0 kHz between -3 dB down points. The resonance peak in the receiving sensitivity (SRT) for four combined quadrants (quad LU+LL, quad RU+RL, quad LU+RU, quad LL+RL) of the split beam transducer was observed all at 75.0 kHz and the value of SRT was all about -177.7 dB re 1 V/$\mu$Pa at 75.0 kHz with bandwidth of 10.0 kHz between -3 dB down points. The sum beam transmitting voltage response and receiving senstivity was 175.0 dB re 1$\mu$Pa/V at 1 m at 75.0 kHz with bandwidth of 10.0 kHz, respectively. 3. The sum beam of split beam transducer was approximately circular with a half beam angle of $9.0^\circ$ at -3 dB points all in both axis of the horizontal plane and the vertical plane. The first measured side lobe levels for the sum beam of split beam transducer were -19.7 dB at $22^\circ$ and -19.4 dB at $-26^\circ$ in the horizontal plane, respectively and -20.1 dB at $22^\circ$ and -22.0 dB at $-26^\circ$ in the vertical plane, respectively. 4. The developed split beam transducer was tested to estimate the angular position of the target in the beam through split beam phase measurements, and the beam pattern loss for target strength corrections was measured and analyzed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.5
• /
• pp.628-632
• /
• 2008

Egg production traits are economically important both for egg-laying and broiler lines of chicken. In sheep, the Q249R mutation in BMPR-IB is associated with ovulation rate. The present study cloned a partial chicken BMPR-IB fragment which contained the corresponding ovine Q249R mutation, including partial exon 6 and exon 7 and full-length intron 6. Five nucleotide changes were identified by alignment of the fragment amplified from Jining Bairi and Zang chickens. Among these nucleotide substitutions, the C/T transition at the base position of 35 and the A/G transition at the base position of 287 were found to be highly polymorphic, and named as SNPs C35T and A287G, respectively. For the SNP C35T, 331 hens of a synthetic broiler line were genotyped by a PCR-SSCP approach and allele C was found to be dominant. For the SNP A287G, 604 birds from the synthetic broiler line, a commercial egg-laying line, as well as three Chinese indigenous chicken breeds were genotyped by a PCR-RFLP technique. The associations of these two SNPs with egg production traits in the broiler line were analyzed. The results indicated that both the C35T and the A287G SNPs were not associated with egg production at 33wks and from 33wks to 42 wks (p>0.1), whereas the SNP A287G was associated with egg production from 47 to 56 wks (p<0.05). The dominance genetic effects on this latter trait and on egg production from 33 to 42 wks were significant (p<0.05).

• BMB Reports
• /
• v.46 no.5
• /
• pp.252-257
• /
• 2013

Fibroblast activation protein (FAP) is a specific serine protease expressed in tumor stroma proven to be a stimulatory factor in the progression of some cancers. The purpose of this study was to investigate the effects of FAP knockdown on tumor growth and the tumor microenvironment. Mice bearing 4T1 subcutaneous tumors were treated with liposome-shRNA complexes targeting FAP. Tumor volumes and weights were monitored, and FAP, collagen, microvessel density (MVD), and apoptosis were measured. Our studies showed that shRNA targeting of FAP in murine breast cancer reduces FAP expression, inhibits tumor growth, promotes collagen accumulation (38%), and suppresses angiogenesis (71.7%), as well as promoting apoptosis (by threefold). We suggest that FAP plays a role in tumor growth and in altering the tumor microenvironment. Targeting FAP may therefore represent a supplementary therapy for breast cancer.

• Steel and Composite Structures
• /
• v.21 no.1
• /
• pp.217-247
• /
• 2016

Five extended cylindrical reticulated shells are proposed by changing distribution rule of diagonal rods based on three fundamental types. Modeling programs for fundamental types and extended types of cylindrical reticulated shell are compiled by using the ANSYS Parametric Design Language (APDL). On this basis, conditional formulas are derived when the grid shape of cylindrical reticulated shells is equilateral triangle. Internal force analysis of cylindrical reticulated shells is carried out. The variation and distribution regularities of maximum displacement and stress are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of cylindrical reticulated shells and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization for three fundamental types and five extended types is calculated with the span of 30 m~80 m and rise-span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise-span ratio are analyzed with contrast to the results of shape optimization. The optimal combination of main design parameters for five extended cylindrical reticulated shells is investigated. The total steel consumption affected by distribution rule of diagonal rods is discussed. The results show that: (1) Parametric modeling method is simple, efficient and practical, which can quickly generate different types of cylindrical reticulated shells. (2) The mechanical properties of five extended cylindrical reticulated shells are better than their fundamental types. (3) The total steel consumption of cylindrical reticulated shells is optimized to be the least when rise-span ratio is 1/6. (4) The extended type of three-way grid cylindrical reticulated shell should be preferentially adopted in practical engineering. (5) The grid shape of reticulated shells should be designed to equilateral triangle as much as possible because of its reasonable stress and the lowest total steel consumption.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1422-1432
• /
• 2014

Convergent all-electron multi-reference configuration-interaction (MRCI) calculations are performed for a lithium dimer with Kaufmann's Rydberg basis functions. A comparison of the results of these calculations with those of the effective core potential/core polarization potential (ECP/CPP) method and experimental data reveals the deficiency of the all-electron ab initio method. The deficiency is related to the mere 51.9% attainment of electron correlation for the ground state. The percent attainment of electron correlation for the first excited state is slightly better than that for the ground state, preventing us from obtaining better agreements with experimental data by means of increasing the size of basis sets. The Kaufmann basis functions are then used with the ECP/CPP method to obtain the accurate convergent potential energy curves for the $^1\prod_u$ states correlated to Li(2p) + Li(2p) and Li(2s) + Li(n = 2, 3, 4). Quantum defect curves (QDCs) calculated for both the $X^2\sum_g$ and 1 $^2\prod_u$ states of the $Li{_2}^+$ ion and the Lu-Fano plot reveal a strong series-series interaction between the two $2snp{\pi}$ and $2pnp{\pi}$ Rydberg series. The QDCs are then used to resolve assignment problems in the literature. The reassignments, performed by Jedrzejewski-Szemek et al., of the dissociation product of the D $^1\prod$ state from (2s+3d) to (2s+3p) and that of the 6 $^1\prod_u$ from (2s+4d) to (2s+4p) are found to be incorrect. It may be more natural to assign their $2snp{\pi}$ Rydberg series as a $2snd{\pi}$ series. The state, assigned as 5p $^1\prod_u$ by Ross et al. and 4d $^1\prod$ by Jedrzejewski-Szemek et al., is assigned as the 7 $^1\prod_u$ state, correlated to the Li(2s) + Li(4f) limit.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1157-1161
• /
• 2008

2,6-Dinitrophenol (2,6-DNP) complexes with lanthanide series including yttrium (except Pm, Tm, and Lu) have been synthesized and their crystal structures have been analyzed by X-ray diffraction methods. Singlecrystal X-ray structure determinations have been performed at 296 K on the Ce$\rightarrow$Yb species and shown them to be isomorphous, triclinic, P1, a = 8.6558(2)$\rightarrow$8.5605(3) $\AA$, b = 11.8813(3)$\rightarrow$11.6611(4) $\AA$, c = 13.9650(3) $\rightarrow$13.8341(5) $\AA$, $\alpha$ = 73.785(1)$\rightarrow$73.531(2)o, $\beta$ = 74.730(1)→74.903(2)${^{\circ}}$, $\gamma$ = 69.124(1)→ 69.670 $(2){^{\circ}}$, V = 1266.86(5)→1221.53(7) $$\AA^{3}$$, Z = 2. In Ln(III) complexes, three 2,6-DNP ligands coordinate directly to the metal ion in the bidentate fashion. The nine coordinated Ln(III) ion forms slightly distorted tri-capped trigonal prism. There are no water molecules in the crystal lattice. The dependences of metal to ligand bond lengths are discussed on the atomic number of lanthanide elements. The thermal properties of lanthanide complexes of 2,6- DNP have also studied by TG-DTG and DSC thermal analysis methods.